From: Elijah Newren <newren@xxxxxxxxx>
Many of our test scripts have several "setup" tests. It's a lot easier
to say
./t0050-filesystem.sh --run=setup,9
in order to run all the setup tests as well as test #9, than it is to
track down what all the setup tests are and enter all their numbers in
the list. Also, I often find myself wanting to run just one or a couple
tests from the test file, but I don't know the numbering of any of the
tests -- to get it I either have to first run the whole test file (or
start counting by hand or figure out some other clever but non-obvious
tricks). It's really convenient to be able to just look at the test
description(s) and then run
./t6416-recursive-corner-cases.sh --run=symlink
or
./t6402-merge-rename.sh --run='setup,unnecessary update'
Add such an ability to test selection which relies on merely matching
against the test description.
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
---
t/README | 26 +++++++++++++++++++-------
t/t0000-basic.sh | 41 +++++++++++++++++++++++++----------------
t/test-lib.sh | 13 +++++++------
3 files changed, 51 insertions(+), 29 deletions(-)
diff --git a/t/README b/t/README
index 2adaf7c2d2..23639c5bcf 100644
--- a/t/README
+++ b/t/README
@@ -258,13 +258,13 @@ For an individual test suite --run could be used to specify that
only some tests should be run or that some tests should be
excluded from a run.
-The argument for --run is a list of individual test numbers or
-ranges with an optional negation prefix that define what tests in
-a test suite to include in the run. A range is two numbers
-separated with a dash and matches a range of tests with both ends
-been included. You may omit the first or the second number to
-mean "from the first test" or "up to the very last test"
-respectively.
+The argument for --run, <test-selector>, is a list of description
+substrings or regexes or individual test numbers or ranges with an
+optional negation prefix that define what tests in a test suite to
+include in the run. A range is two numbers separated with a dash and
+matches a range of tests with both ends been included. You may omit
+the first or the second number to mean "from the first test" or "up to
+the very last test" respectively.
Optional prefix of '!' means that the test or a range of tests
should be excluded from the run.
@@ -317,6 +317,18 @@ test in the test suite except from 7 up to 11:
$ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
+Sometimes there may be multiple tests with e.g. "setup" in their name
+that are needed and rather than figuring out the number for all of them
+we can just use "setup" as a substring/regex to match against the test
+description:
+
+ $ sh ./t0050-filesystem.sh --run=setup,9-11
+
+or one could select both the setup tests and the rename ones (assuming all
+relevant tests had those words in their descriptions):
+
+ $ sh ./t0050-filesystem.sh --run=setup,rename
+
Some tests in a test suite rely on the previous tests performing
certain actions, specifically some tests are designated as
"setup" test, so you cannot _arbitrarily_ disable one test and
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 923281af93..07105b2078 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -705,7 +705,31 @@ test_expect_success '--run empty selectors' "
EOF
"
-test_expect_success '--run invalid range start' "
+test_expect_success '--run substring selector' "
+ run_sub_test_lib_test run-substring-selector \
+ '--run empty selectors' \
+ --run='relevant' <<-\\EOF &&
+ test_expect_success \"relevant test\" 'true'
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"other test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-substring-selector <<-\\EOF
+ > ok 1 - relevant test
+ > ok 2 # skip other test #1 (--run)
+ > ok 3 # skip other test #2 (--run)
+ > ok 4 # skip other test #3 (--run)
+ > ok 5 # skip other test #4 (--run)
+ > ok 6 # skip other test #5 (--run)
+ > ok 7 # skip other test #6 (--run)
+ > # passed all 7 test(s)
+ > 1..7
+ EOF
+"
+
+test_expect_success '--run keyword selection' "
run_sub_test_lib_test_err run-inv-range-start \
'--run invalid range start' \
--run='a-5' <<-\\EOF &&
@@ -735,21 +759,6 @@ test_expect_success '--run invalid range end' "
EOF_ERR
"
-test_expect_success '--run invalid selector' "
- run_sub_test_lib_test_err run-inv-selector \
- '--run invalid selector' \
- --run='1?' <<-\\EOF &&
- test_expect_success \"passing test #1\" 'true'
- test_done
- EOF
- check_sub_test_lib_test_err run-inv-selector \
- <<-\\EOF_OUT 3<<-\\EOF_ERR
- > FATAL: Unexpected exit with code 1
- EOF_OUT
- > error: --run: invalid non-numeric in test selector: '1?'
- EOF_ERR
-"
-
test_set_prereq HAVEIT
haveit=no
diff --git a/t/test-lib.sh b/t/test-lib.sh
index ef31f40037..2aca398e1e 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -769,6 +769,8 @@ match_pattern_list () {
}
match_test_selector_list () {
+ operation="$1"
+ shift
title="$1"
shift
arg="$1"
@@ -805,13 +807,13 @@ match_test_selector_list () {
*-*)
if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in range" \
+ echo "error: $operation: invalid non-numeric in range" \
"start: '$orig_selector'" >&2
exit 1
fi
if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in range" \
+ echo "error: $operation: invalid non-numeric in range" \
"end: '$orig_selector'" >&2
exit 1
fi
@@ -819,9 +821,8 @@ match_test_selector_list () {
*)
if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in test" \
- "selector: '$orig_selector'" >&2
- exit 1
+ echo "$title" | grep -q "$selector" && return
+ continue
fi
esac
@@ -1031,7 +1032,7 @@ test_skip () {
skipped_reason="GIT_SKIP_TESTS"
fi
if test -z "$to_skip" && test -n "$run_list" &&
- ! match_test_selector_list '--run' $test_count "$run_list"
+ ! match_test_selector_list '--run' "$1" $test_count "$run_list"
then
to_skip=t
skipped_reason="--run"
--
gitgitgadget
