From: Kyohei Kadota <lufia@xxxxxxxxx>
tr(1) of ANSI/POSIX environment, aka APE, don't support \n literal.
It's handles only octal(\ooo) or hexadecimal(\xhhhh) numbers.
And its sed(1)'s label is limited to maximum seven characters.
Therefore I replaced some labels to drop a character.
* close -> cl
* continue -> cont (cnt is used for count)
* line -> ln
* hered -> hdoc
* shell -> sh
* string -> str
Signed-off-by: Kyohei Kadota <lufia@xxxxxxxxx>
---
generate-cmdlist.sh | 4 +--
t/chainlint.sed | 66 ++++++++++++++++++++++-----------------------
2 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/generate-cmdlist.sh b/generate-cmdlist.sh
index 45fecf8bdf..4031623b0e 100755
--- a/generate-cmdlist.sh
+++ b/generate-cmdlist.sh
@@ -10,7 +10,7 @@ command_list () {
}
get_categories () {
- tr ' ' '\n'|
+ tr ' ' '\012'|
grep -v '^$' |
sort |
uniq
@@ -24,7 +24,7 @@ category_list () {
get_synopsis () {
sed -n '
- /^NAME/,/'"$1"'/H
+ /^NAME/,/'"$1"'/h
${
x
s/.*'"$1"' - \(.*\)/N_("\1")/
diff --git a/t/chainlint.sed b/t/chainlint.sed
index 70df40e34b..8a25c5b855 100644
--- a/t/chainlint.sed
+++ b/t/chainlint.sed
@@ -117,7 +117,7 @@
/^[ ]*!*[ ]*(..*)[ ]*[0-9]*[<>|&]/boneline
# multi-line "(...\n...)"
-/^[ ]*(/bsubshell
+/^[ ]*(/bsubsh
# innocuous line -- print it and advance to next line
b
@@ -130,11 +130,11 @@ b
}
b
-:subshell
+:subsh
# bare "(" line? -- stash for later printing
/^[ ]*([ ]*$/ {
h
- bnextline
+ bnextln
}
# "(..." line -- split off and stash "(", then process "..." as its own line
x
@@ -143,7 +143,7 @@ x
s/(//
bslurp
-:nextline
+:nextln
N
s/.*\n//
@@ -151,10 +151,10 @@ s/.*\n//
# incomplete line "...\"
/\\$/bicmplte
# multi-line quoted string "...\n..."?
-/"/bdqstring
+/"/bdqstr
# multi-line quoted string '...\n...'? (but not contraction in string "it's")
/'/{
- /"[^'"]*'[^'"]*"/!bsqstring
+ /"[^'"]*'[^'"]*"/!bsqstr
}
:folded
# here-doc -- swallow it
@@ -163,8 +163,8 @@ s/.*\n//
# before closing ")", "done", "elsif", "else", or "fi" will need to be
# re-visited to drop "suspect" marking since final line of those constructs
# legitimately lacks "&&", so "suspect" mark must be removed
-/^[ ]*#/bnextline
-/^[ ]*$/bnextline
+/^[ ]*#/bnextln
+/^[ ]*$/bnextln
# in-line comment -- strip it (but not "#" in a string, Bash ${#...} array
# length, or Perforce "//depot/path#42" revision in filespec)
/[ ]#/{
@@ -175,22 +175,22 @@ s/.*\n//
# multi-line "case ... esac"
/^[ ]*case[ ]..*[ ]in/bcase
# multi-line "for ... done" or "while ... done"
-/^[ ]*for[ ]..*[ ]in/bcontinue
-/^[ ]*while[ ]/bcontinue
-/^[ ]*do[ ]/bcontinue
-/^[ ]*do[ ]*$/bcontinue
-/;[ ]*do/bcontinue
+/^[ ]*for[ ]..*[ ]in/bcont
+/^[ ]*while[ ]/bcont
+/^[ ]*do[ ]/bcont
+/^[ ]*do[ ]*$/bcont
+/;[ ]*do/bcont
/^[ ]*done[ ]*&&[ ]*$/bdone
/^[ ]*done[ ]*$/bdone
/^[ ]*done[ ]*[<>|]/bdone
/^[ ]*done[ ]*)/bdone
-/||[ ]*exit[ ]/bcontinue
-/||[ ]*exit[ ]*$/bcontinue
+/||[ ]*exit[ ]/bcont
+/||[ ]*exit[ ]*$/bcont
# multi-line "if...elsif...else...fi"
-/^[ ]*if[ ]/bcontinue
-/^[ ]*then[ ]/bcontinue
-/^[ ]*then[ ]*$/bcontinue
-/;[ ]*then/bcontinue
+/^[ ]*if[ ]/bcont
+/^[ ]*then[ ]/bcont
+/^[ ]*then[ ]*$/bcont
+/;[ ]*then/bcont
/^[ ]*elif[ ]/belse
/^[ ]*elif[ ]*$/belse
/^[ ]*else[ ]/belse
@@ -234,10 +234,10 @@ s/.*\n//
}
}
# line ends with pipe "...|" -- valid; not missing "&&"
-/|[ ]*$/bcontinue
+/|[ ]*$/bcont
# missing end-of-line "&&" -- mark suspect
/&&[ ]*$/!s/^/?!AMP?!/
-:continue
+:cont
# retrieve and print previous line
x
n
@@ -250,7 +250,7 @@ s/\\\n//
bslurp
# check for multi-line double-quoted string "...\n..." -- fold to one line
-:dqstring
+:dqstr
# remove all quote pairs
s/"\([^"]*\)"/@!\1@!/g
# done if no dangling quote
@@ -258,13 +258,13 @@ s/"\([^"]*\)"/@!\1@!/g
# otherwise, slurp next line and try again
N
s/\n//
-bdqstring
+bdqstr
:dqdone
s/@!/"/g
bfolded
# check for multi-line single-quoted string '...\n...' -- fold to one line
-:sqstring
+:sqstr
# remove all quote pairs
s/'\([^']*\)'/@!\1@!/g
# done if no dangling quote
@@ -272,7 +272,7 @@ s/'\([^']*\)'/@!\1@!/g
# otherwise, slurp next line and try again
N
s/\n//
-bsqstring
+bsqstr
:sqdone
s/@!/'/g
bfolded
@@ -282,11 +282,11 @@ bfolded
:heredoc
s/^\(.*\)<<[ ]*[-\\'"]*\([A-Za-z0-9_][A-Za-z0-9_]*\)['"]*/<\2>\1<</
s/[ ]*<<//
-:heredsub
+:hdocsub
N
/^<\([^>]*\)>.*\n[ ]*\1[ ]*$/!{
s/\n.*$//
- bheredsub
+ bhdocsub
}
s/^<[^>]*>//
s/\n.*$//
@@ -305,7 +305,7 @@ bcase
x
s/?!AMP?!//
x
-bcontinue
+bcont
# found "done" closing for-loop or while-loop, or "fi" closing if-then -- drop
# "suspect" from final contained line since that line legitimately lacks "&&"
@@ -321,10 +321,10 @@ bchkchn
# found nested multi-line "(...\n...)" -- pass through untouched
:nest
x
-:nstslurp
+:nstslrp
n
# closing ")" on own line -- stop nested slurp
-/^[ ]*)/bnstclose
+/^[ ]*)/bnstcl
# comment -- not closing ")" if in comment
/^[ ]*#/bnstcnt
# "$((...))" -- arithmetic expansion; not closing ")"
@@ -332,11 +332,11 @@ n
# "$(...)" -- command substitution; not closing ")"
/\$([^)][^)]*)[^)]*$/bnstcnt
# closing "...)" -- stop nested slurp
-/)/bnstclose
+/)/bnstcl
:nstcnt
x
-bnstslurp
-:nstclose
+bnstslrp
+:nstcl
s/^/>>/
# is it "))" which closes nested and parent subshells?
/)[ ]*)/bslurp
--
gitgitgadget
