Jeff King <peff@xxxxxxxx> writes:
> Here's what I came up with that I think is suitable for applying (though
> if you find the GNUPGHOME thing below too gross, I can rework it as
> indicated):
I actually think it is perfectly fine to mkdir and set the
environment even outside test_expect_success; that way, even
GIT_SKIP_TESTS cannot omit the necessary initialization. And as you
said, leaving the environment pointing into the trash repository's
working tree should be fine when we fail the GPG prereq. We
shouldn't be running GPG at all in such a case.
> -- >8 --
> Subject: [PATCH] t/lib-gpg: run setup code in test blocks
>
> The steps to check the GPG prereq and set up GNUPGHOME are run in the
> main script, with stdout and stderr redirected. This avoids spewing
> useless output when GPG isn't available. But it also means that there's
> no easy way to see what did happen if you're using "-v" or "-x".
>
> Let's push this as much as possible into a lazy_prereq blocks, which
> handle verbosity and tracing for us. There's one tricky thing here: part
> of the setup involves setting $GNUPGHOME, but lazy_prereq blocks are
> evaluated in a subshell in order to avoid accidental environment
> contamination. Splitting the setup from the prereq is tricky; the prereq
> is basically "did we successfully set things up".
>
> We could run all of the GPG prereq code in its own test_expect_success
> block. But that gets awkward because we _don't_ want to report failure
> if a command fails (we just want to not set the prereq).
>
> I've solved it here by pulling the GNUPGHOME setup into its own separate
> setup step, that happens _before_ we check the prereq. That means we'd
> set up the variable even if we don't have gpg, but that should be OK;
> we'll be skipping any gpg tests in that case anyway. (If it's not, the
> alternative is to put the big &&-chain into a separate function of "{}"
> block).
>
> Now that the code is inside test blocks, we can take advantage of this
> to use &&-chaining and early returns, and avoid indenting everything
> inside a big case statement.
>
> Signed-off-by: Jeff King <peff@xxxxxxxx>
> ---
> On top of Dscho's patch 1, since it uses $PWD/gpghome.
Looking good.
> t/lib-gpg.sh | 145 +++++++++++++++++++++++++++------------------------
> 1 file changed, 76 insertions(+), 69 deletions(-)
>
> diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh
> index 11b83b8c24..56153b3123 100755
> --- a/t/lib-gpg.sh
> +++ b/t/lib-gpg.sh
> @@ -1,81 +1,88 @@
> #!/bin/sh
>
> -gpg_version=$(gpg --version 2>&1)
> -if test $? != 127
> -then
> +# This can't run as part of the lazy_prereq below because it has the side
> +# effect of setting an environment variable.
> +test_expect_success 'set up GNUPGHOME' '
> + mkdir ./gpghome &&
> + chmod 0700 ./gpghome &&
> + GNUPGHOME="$PWD/gpghome" &&
> + export GNUPGHOME
> +'
> +
> +test_lazy_prereq GPG '
> + {
> + gpg_version=$(gpg --version)
> + test $? != 127
> + } &&
> +
> # As said here: http://www.gnupg.org/documentation/faqs.html#q6.19
> - # the gpg version 1.0.6 didn't parse trust packets correctly, so for
> + # the gpg version 1.0.6 did not parse trust packets correctly, so for
> # that version, creation of signed tags using the generated key fails.
> case "$gpg_version" in
> - 'gpg (GnuPG) 1.0.6'*)
> - say "Your version of gpg (1.0.6) is too buggy for testing"
> + "gpg (GnuPG) 1.0.6"*)
> + echo >&2 "Your version of gpg (1.0.6) is too buggy for testing"
> + return 1
> ;;
> - *)
> - # Available key info:
> - # * Type DSA and Elgamal, size 2048 bits, no expiration date,
> - # name and email: C O Mitter <committer@xxxxxxxxxxx>
> - # * Type RSA, size 2048 bits, no expiration date,
> - # name and email: Eris Discordia <discord@xxxxxxxxxxx>
> - # No password given, to enable non-interactive operation.
> - # To generate new key:
> - # gpg --homedir /tmp/gpghome --gen-key
> - # To write armored exported key to keyring:
> - # gpg --homedir /tmp/gpghome --export-secret-keys \
> - # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg
> - # gpg --homedir /tmp/gpghome --export \
> - # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg
> - # To export ownertrust:
> - # gpg --homedir /tmp/gpghome --export-ownertrust \
> - # > lib-gpg/ownertrust
> - mkdir ./gpghome &&
> - chmod 0700 ./gpghome &&
> - GNUPGHOME="$PWD/gpghome" &&
> - export GNUPGHOME &&
> - (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) &&
> - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \
> - "$TEST_DIRECTORY"/lib-gpg/keyring.gpg &&
> - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \
> - "$TEST_DIRECTORY"/lib-gpg/ownertrust &&
> - gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null 2>&1 \
> - --sign -u committer@xxxxxxxxxxx &&
> - test_set_prereq GPG &&
> - # Available key info:
> - # * see t/lib-gpg/gpgsm-gen-key.in
> - # To generate new certificate:
> - # * no passphrase
> - # gpgsm --homedir /tmp/gpghome/ \
> - # -o /tmp/gpgsm.crt.user \
> - # --generate-key \
> - # --batch t/lib-gpg/gpgsm-gen-key.in
> - # To import certificate:
> - # gpgsm --homedir /tmp/gpghome/ \
> - # --import /tmp/gpgsm.crt.user
> - # To export into a .p12 we can later import:
> - # gpgsm --homedir /tmp/gpghome/ \
> - # -o t/lib-gpg/gpgsm_cert.p12 \
> - # --export-secret-key-p12 "committer@xxxxxxxxxxx"
> - echo | gpgsm --homedir "${GNUPGHOME}" 2>/dev/null \
> - --passphrase-fd 0 --pinentry-mode loopback \
> - --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 &&
> + esac &&
>
> - gpgsm --homedir "${GNUPGHOME}" 2>/dev/null -K |
> - grep fingerprint: |
> - cut -d" " -f4 |
> - tr -d '\n' >"${GNUPGHOME}/trustlist.txt" &&
> + # Available key info:
> + # * Type DSA and Elgamal, size 2048 bits, no expiration date,
> + # name and email: C O Mitter <committer@xxxxxxxxxxx>
> + # * Type RSA, size 2048 bits, no expiration date,
> + # name and email: Eris Discordia <discord@xxxxxxxxxxx>
> + # No password given, to enable non-interactive operation.
> + # To generate new key:
> + # gpg --homedir /tmp/gpghome --gen-key
> + # To write armored exported key to keyring:
> + # gpg --homedir /tmp/gpghome --export-secret-keys \
> + # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg
> + # gpg --homedir /tmp/gpghome --export \
> + # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg
> + # To export ownertrust:
> + # gpg --homedir /tmp/gpghome --export-ownertrust \
> + # > lib-gpg/ownertrust
> + (gpgconf --kill gpg-agent || : ) &&
> + gpg --homedir "${GNUPGHOME}" --import \
> + "$TEST_DIRECTORY"/lib-gpg/keyring.gpg &&
> + gpg --homedir "${GNUPGHOME}" --import-ownertrust \
> + "$TEST_DIRECTORY"/lib-gpg/ownertrust &&
> + gpg --homedir "${GNUPGHOME}" \
> + --sign -u committer@xxxxxxxxxxx >/dev/null
> +'
>
> - echo " S relax" >>"${GNUPGHOME}/trustlist.txt" &&
> - echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \
> - -u committer@xxxxxxxxxxx -o /dev/null --sign - 2>&1 &&
> - test_set_prereq GPGSM
> - ;;
> - esac
> -fi
> +test_have_prereq GPG &&
> +test_lazy_prereq GPGSM '
> + # Available key info:
> + # * see t/lib-gpg/gpgsm-gen-key.in
> + # To generate new certificate:
> + # * no passphrase
> + # gpgsm --homedir /tmp/gpghome/ \
> + # -o /tmp/gpgsm.crt.user \
> + # --generate-key \
> + # --batch t/lib-gpg/gpgsm-gen-key.in
> + # To import certificate:
> + # gpgsm --homedir /tmp/gpghome/ \
> + # --import /tmp/gpgsm.crt.user
> + # To export into a .p12 we can later import:
> + # gpgsm --homedir /tmp/gpghome/ \
> + # -o t/lib-gpg/gpgsm_cert.p12 \
> + # --export-secret-key-p12 "committer@xxxxxxxxxxx"
> + echo | gpgsm --homedir "${GNUPGHOME}" \
> + --passphrase-fd 0 --pinentry-mode loopback \
> + --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 &&
> + gpgsm --homedir "${GNUPGHOME}" -K |
> + grep fingerprint: |
> + cut -d" " -f4 |
> + tr -d "\\n" >"${GNUPGHOME}/trustlist.txt" &&
> + echo " S relax" >>"${GNUPGHOME}/trustlist.txt" &&
> + echo hello | gpgsm --homedir "${GNUPGHOME}" \
> + -u committer@xxxxxxxxxxx -o /dev/null --sign -
> +'
>
> -if test_have_prereq GPG &&
> - echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null 2>&1
> -then
> - test_set_prereq RFC1991
> -fi
> +test_have_prereq GPG &&
> +test_lazy_prereq RFC1991 '
> + echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991
> +'
>
> sanitize_pgp() {
> perl -ne '
