These colors are the bright variants of the 3-bit colors.
Signed-off-by: Eyal Soha <shawarmakarma@xxxxxxxxx>
---
Documentation/config.txt | 4 +++-
color.c | 34 +++++++++++++++++++++++++++-------
t/t4026-color.sh | 8 ++++++++
3 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 83e7bba872..08b13ba72b 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -263,7 +263,9 @@ color::
+
The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
`blue`, `magenta`, `cyan` and `white`. The first color given is the
-foreground; the second is the background.
+foreground; the second is the background. All the basic colors except
+`normal` have a bright variant that can be speficied by prefixing the
+color with `bright`, like `brightred`.
+
Colors may also be given as numbers between 0 and 255; these use ANSI
256-color mode (but note that not all terminals may support this). If
diff --git a/color.c b/color.c
index 3b734ccffd..66d32e1191 100644
--- a/color.c
+++ b/color.c
@@ -29,6 +29,7 @@ enum {
COLOR_FOREGROUND_ANSI = 30,
COLOR_FOREGROUND_RGB = 38,
COLOR_FOREGROUND_256 = 38,
+ COLOR_FOREGROUND_BRIGHT_ANSI = 90,
};
/* Ignore the RESET at the end when giving the size */
@@ -68,13 +69,36 @@ static int get_hex_color(const char *in, unsigned char *out)
return 0;
}
-static int parse_color(struct color *out, const char *name, int len)
+/*
+ * If an ANSI color is recognized in "name", fill "out" and return 0.
+ * Otherwise, leave out unchanged and return -1.
+ */
+static int parse_ansi_color(struct color *out, const char *name, int len)
{
/* Positions in array must match ANSI color codes */
static const char * const color_names[] = {
"black", "red", "green", "yellow",
"blue", "magenta", "cyan", "white"
};
+
+ int color_offset = COLOR_FOREGROUND_ANSI;
+ if (strncasecmp(name, "bright", 6) == 0) {
+ color_offset = COLOR_FOREGROUND_BRIGHT_ANSI;
+ name += 6;
+ len -= 6;
+ }
+ for (int i = 0; i < ARRAY_SIZE(color_names); i++) {
+ if (match_word(name, len, color_names[i])) {
+ out->type = COLOR_ANSI;
+ out->value = i + color_offset;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static int parse_color(struct color *out, const char *name, int len)
+{
char *end;
int i;
long val;
@@ -96,12 +120,8 @@ static int parse_color(struct color *out, const char *name, int len)
}
/* Then pick from our human-readable color names... */
- for (i = 0; i < ARRAY_SIZE(color_names); i++) {
- if (match_word(name, len, color_names[i])) {
- out->type = COLOR_ANSI;
- out->value = i + COLOR_FOREGROUND_ANSI;
- return 0;
- }
+ if (parse_ansi_color(out, name, len) == 0) {
+ return 0;
}
/* And finally try a literal 256-color-mode number */
diff --git a/t/t4026-color.sh b/t/t4026-color.sh
index 671e951ee5..78c69de90a 100755
--- a/t/t4026-color.sh
+++ b/t/t4026-color.sh
@@ -30,6 +30,14 @@ test_expect_success 'attribute before color name' '
color "bold red" "[1;31m"
'
+test_expect_success 'aixterm bright fg color' '
+ color "brightred" "[91m"
+'
+
+test_expect_success 'aixterm bright bg color' '
+ color "green brightblue" "[32;104m"
+'
+
test_expect_success 'color name before attribute' '
color "red bold" "[1;31m"
'
--
2.25.0.rc2.3.g8712c6e7f0
