On Thu, Oct 17, 2019 at 12:47:33PM +0000, Johannes Schindelin via GitGitGadget wrote: > From: Johannes Schindelin <johannes.schindelin@xxxxxx> > > The CI builds are failing for Mac OS X due to a change in the s/CI/Azure Pipelines/ Our Travis CI builds are fine. > location of the perforce cask. The command outputs the following > error: > > + brew install caskroom/cask/perforce > Error: caskroom/cask was moved. Tap homebrew/cask-cask instead. > > So let's try to call `brew cask install perforce` first (which is what > that error message suggests, in a most round-about way). > > The "caskroom" way was added in 672f51cb (travis-ci: > fix Perforce install on macOS, 2017-01-22) and the justification > is that the call "brew cask install perforce" can fail due to a checksum > mismatch: the recipe simply downloads the official Perforce distro, and > whenever that is updated, the recipe needs to be updated, too. This paragraph is wrong, it mixes up things too much. Prior to 672f51cb we used to install the 'perforce' _package_ with 'brew install perforce' (note: no 'cask' in there). The justification for 672f51cb was that the command 'brew install perforce' simply stopped working, after Homebrew folks decided that it's better to move the 'perforce' package to a "cask". It was _their_ justification for this move that 'brew install perforce' "can fail due to a checksum mismatch ...", and casks can be installed without checksum verification. And indeed, both 'brew cask install perforce' and 'brew install caskroom/cask/perforce' printed something along the lines of: ==> No checksum defined for Cask perforce, skipping verification It's unclear to me why 672f51cb used 'brew install caskroom/cask/perforce' instead of 'brew cask install perforce'. It appears (by running both commands on old Travis CI macOS images) that both commands worked all the same already back then. Anyway, as the error message at the top of the log message shows, 'brew install caskroom/cask/perforce' has stopped working recently, but 'brew cask install perforce' still does, so let's use that. Note that on Travis CI we explicitly specify which macOS image to use, and nowadays we don't run 'brew update' during the build process [1], so both commands work in our builds there. [1] f2f4715033 (ci: don't update Homebrew, 2019-07-03) > CI servers are typically fresh virtual machines, but not always. To > accommodate for that, let's try harder if `brew cask install perforce` > fails, by specifically pulling the latest `master` of the > `homebrew-cask` repository. Homebrew didn't record a checksum for Perforce versions r17.1, r17.2 and r18.1, so installing those still works fine. Our Travis CI images install r18.1. However, when Homebrew updated to Perforce r19.1, they included the checksum again for some reason (intentional or accidental; I didn't look why). This worked fine for a while, until a couple of days ago Perforce updated the r19.1 binaries in place, breaking those checksums. If we were to still run 'brew update', then it would shortly fix the checksum mismatch. But we don't run it, and we do not want to run it because it takes ages. Falling back to pull from the 'homebrew-cask' repository could be a reasonable and quick workaround. > This will still fail, of course, when `homebrew-cask` falls behind > Perforce's release schedule. But once it is updated, we can now simply > re-run the failed jobs and they will pick up that update. In our CI builds we don't at all care what the checksums of the Perforce binaries are, so I would really like to tell 'brew' to ignore any checksum mismatch when installing 'perforce'. Alas, it appears that 'brew' has no public options to turn of or to ignore checksum verification. Now, let's take a step back. All 'brew cask install perforce' really does is run 'curl' to download a tar.gz from the Perforce servers, verify its checksum, unpack it, and put the executables somewhere on $PATH. That's not rocket science, we could easily do that ourselves; we don't even have to deal with a tar.gz, the 'p4' and 'p4d' binaries for mac are readily available for download at: http://filehost.perforce.com/perforce/r19.1/bin.macosx1010x86_64/ And, in fact, that's what we have been doing in some of our Linux jobs since the very beginning, so basically only the download URL has to be adjusted. > As for updating `homebrew-cask`: the beginnings of automating this in > https://dev.azure.com/gitgitgadget/git/_build?definitionId=11&_a=summary > will be finished once the next Perforce upgrade comes around. > > Signed-off-by: Johannes Schindelin <johannes.schindelin@xxxxxx> > Signed-off-by: Derrick Stolee <dstolee@xxxxxxxxxxxxx> > --- > ci/install-dependencies.sh | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/ci/install-dependencies.sh b/ci/install-dependencies.sh > index 85a9d6b15c..ce149ed39c 100755 > --- a/ci/install-dependencies.sh > +++ b/ci/install-dependencies.sh > @@ -40,6 +40,11 @@ osx-clang|osx-gcc) > test -z "$BREW_INSTALL_PACKAGES" || > brew install $BREW_INSTALL_PACKAGES > brew link --force gettext > + brew cask install perforce || { > + # Update the definitions and try again > + git -C "$(brew --repository)"/Library/Taps/homebrew/homebrew-cask pull && > + brew cask install perforce > + } || > brew install caskroom/cask/perforce > case "$jobname" in > osx-gcc) > -- > gitgitgadget
