From: James Coglan <jcoglan@xxxxxxxxx>
The change I'm about to make requires being able to inspect the mapping
array that was used to render the last GRAPH_COLLAPSING line while
rendering a GRAPH_COMMIT line. The `new_mapping` array currently exists
as a pre-allocated space for computing the next `mapping` array during
`graph_output_collapsing_line()`, but we can repurpose it to let us see
the previous `mapping` state.
To support this use it will make more sense if this array is named
`old_mapping`, as it will contain the mapping data for the previous line
we rendered, at the point we're rendering a commit line.
Signed-off-by: James Coglan <jcoglan@xxxxxxxxx>
---
graph.c | 54 +++++++++++++++++++++++++++---------------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/graph.c b/graph.c
index 21edad8085..2315f3604d 100644
--- a/graph.c
+++ b/graph.c
@@ -259,7 +259,7 @@ struct git_graph {
/*
* The maximum number of columns that can be stored in the columns
* and new_columns arrays. This is also half the number of entries
- * that can be stored in the mapping and new_mapping arrays.
+ * that can be stored in the mapping and old_mapping arrays.
*/
int column_capacity;
/*
@@ -302,7 +302,7 @@ struct git_graph {
* of the git_graph simply so we don't have to allocate a new
* temporary array each time we have to output a collapsing line.
*/
- int *new_mapping;
+ int *old_mapping;
/*
* The current default column color being used. This is
* stored as an index into the array column_colors.
@@ -388,7 +388,7 @@ struct git_graph *graph_init(struct rev_info *opt)
ALLOC_ARRAY(graph->columns, graph->column_capacity);
ALLOC_ARRAY(graph->new_columns, graph->column_capacity);
ALLOC_ARRAY(graph->mapping, 2 * graph->column_capacity);
- ALLOC_ARRAY(graph->new_mapping, 2 * graph->column_capacity);
+ ALLOC_ARRAY(graph->old_mapping, 2 * graph->column_capacity);
/*
* The diff output prefix callback, with this we can make
@@ -418,7 +418,7 @@ static void graph_ensure_capacity(struct git_graph *graph, int num_columns)
REALLOC_ARRAY(graph->columns, graph->column_capacity);
REALLOC_ARRAY(graph->new_columns, graph->column_capacity);
REALLOC_ARRAY(graph->mapping, graph->column_capacity * 2);
- REALLOC_ARRAY(graph->new_mapping, graph->column_capacity * 2);
+ REALLOC_ARRAY(graph->old_mapping, graph->column_capacity * 2);
}
/*
@@ -1116,13 +1116,18 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
int horizontal_edge_target = -1;
/*
- * Clear out the new_mapping array
+ * Swap the mapping and old_mapping arrays
+ */
+ SWAP(graph->mapping, graph->old_mapping);
+
+ /*
+ * Clear out the mapping array
*/
for (i = 0; i < graph->mapping_size; i++)
- graph->new_mapping[i] = -1;
+ graph->mapping[i] = -1;
for (i = 0; i < graph->mapping_size; i++) {
- int target = graph->mapping[i];
+ int target = graph->old_mapping[i];
if (target < 0)
continue;
@@ -1143,14 +1148,14 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
* This column is already in the
* correct place
*/
- assert(graph->new_mapping[i] == -1);
- graph->new_mapping[i] = target;
- } else if (graph->new_mapping[i - 1] < 0) {
+ assert(graph->mapping[i] == -1);
+ graph->mapping[i] = target;
+ } else if (graph->mapping[i - 1] < 0) {
/*
* Nothing is to the left.
* Move to the left by one
*/
- graph->new_mapping[i - 1] = target;
+ graph->mapping[i - 1] = target;
/*
* If there isn't already an edge moving horizontally
* select this one.
@@ -1166,9 +1171,9 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
* line.
*/
for (j = (target * 2)+3; j < (i - 2); j += 2)
- graph->new_mapping[j] = target;
+ graph->mapping[j] = target;
}
- } else if (graph->new_mapping[i - 1] == target) {
+ } else if (graph->mapping[i - 1] == target) {
/*
* There is a branch line to our left
* already, and it is our target. We
@@ -1176,7 +1181,7 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
* the same parent commit.
*
* We don't have to add anything to the
- * output or new_mapping, since the
+ * output or mapping, since the
* existing branch line has already taken
* care of it.
*/
@@ -1192,10 +1197,10 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
* The branch to the left of that space
* should be our eventual target.
*/
- assert(graph->new_mapping[i - 1] > target);
- assert(graph->new_mapping[i - 2] < 0);
- assert(graph->new_mapping[i - 3] == target);
- graph->new_mapping[i - 2] = target;
+ assert(graph->mapping[i - 1] > target);
+ assert(graph->mapping[i - 2] < 0);
+ assert(graph->mapping[i - 3] == target);
+ graph->mapping[i - 2] = target;
/*
* Mark this branch as the horizontal edge to
* prevent any other edges from moving
@@ -1209,14 +1214,14 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
/*
* The new mapping may be 1 smaller than the old mapping
*/
- if (graph->new_mapping[graph->mapping_size - 1] < 0)
+ if (graph->mapping[graph->mapping_size - 1] < 0)
graph->mapping_size--;
/*
* Output out a line based on the new mapping info
*/
for (i = 0; i < graph->mapping_size; i++) {
- int target = graph->new_mapping[i];
+ int target = graph->mapping[i];
if (target < 0)
graph_line_addch(line, ' ');
else if (target * 2 == i)
@@ -1229,22 +1234,17 @@ static void graph_output_collapsing_line(struct git_graph *graph, struct graph_l
* won't continue into the next line.
*/
if (i != (target * 2)+3)
- graph->new_mapping[i] = -1;
+ graph->mapping[i] = -1;
used_horizontal = 1;
graph_line_write_column(line, &graph->new_columns[target], '_');
} else {
if (used_horizontal && i < horizontal_edge)
- graph->new_mapping[i] = -1;
+ graph->mapping[i] = -1;
graph_line_write_column(line, &graph->new_columns[target], '/');
}
}
- /*
- * Swap mapping and new_mapping
- */
- SWAP(graph->mapping, graph->new_mapping);
-
/*
* If graph->mapping indicates that all of the branch lines
* are already in the correct positions, we are done.
--
gitgitgadget
