In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@xxxxxxxxx>
---
t/t3404-rebase-interactive.sh | 123 ++++++++++++++++------------------
1 file changed, 58 insertions(+), 65 deletions(-)
diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
index 1723e1a858..9146f9d47b 100755
--- a/t/t3404-rebase-interactive.sh
+++ b/t/t3404-rebase-interactive.sh
@@ -75,11 +75,10 @@ test_expect_success 'rebase --keep-empty' '
test_line_count = 6 actual
'
-cat > expect <<EOF
-error: nothing to do
-EOF
-
test_expect_success 'rebase -i with empty HEAD' '
+ cat >expect <<-\EOF &&
+ error: nothing to do
+ EOF
set_fake_editor &&
test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 &&
test_i18ncmp expect actual
@@ -237,25 +236,23 @@ test_expect_success 'exchange two commits' '
test G = $(git cat-file commit HEAD | sed -ne \$p)
'
-cat > expect << EOF
-diff --git a/file1 b/file1
-index f70f10e..fd79235 100644
---- a/file1
-+++ b/file1
-@@ -1 +1 @@
--A
-+G
-EOF
-
-cat > expect2 << EOF
-<<<<<<< HEAD
-D
-=======
-G
->>>>>>> 5d18e54... G
-EOF
-
test_expect_success 'stop on conflicting pick' '
+ cat >expect <<-\EOF &&
+ diff --git a/file1 b/file1
+ index f70f10e..fd79235 100644
+ --- a/file1
+ +++ b/file1
+ @@ -1 +1 @@
+ -A
+ +G
+ EOF
+ cat >expect2 <<-\EOF &&
+ <<<<<<< HEAD
+ D
+ =======
+ G
+ >>>>>>> 5d18e54... G
+ EOF
git tag new-branch1 &&
set_fake_editor &&
test_must_fail git rebase -i master &&
@@ -495,15 +492,14 @@ test_expect_success 'commit message retained after conflict' '
git branch -D conflict-squash
'
-cat > expect-squash-fixup << EOF
-B
-
-D
+test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' '
+ cat >expect-squash-fixup <<-\EOF &&
+ B
-ONCE
-EOF
+ D
-test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' '
+ ONCE
+ EOF
git checkout -b squash-fixup E &&
base=$(git rev-parse HEAD~4) &&
set_fake_editor &&
@@ -799,13 +795,12 @@ test_expect_success 'rebase -i can copy notes' '
test "a note" = "$(git notes show HEAD)"
'
-cat >expect <<EOF
-an earlier note
-
-a note
-EOF
-
test_expect_success 'rebase -i can copy notes over a fixup' '
+ cat >expect <<-\EOF &&
+ an earlier note
+
+ a note
+ EOF
git reset --hard n3 &&
git notes add -m"an earlier note" n2 &&
set_fake_editor &&
@@ -1304,27 +1299,26 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' '
actual
'
-cat >expect <<EOF
-Warning: some commits may have been dropped accidentally.
-Dropped commits (newer to older):
- - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
-To avoid this message, use "drop" to explicitly remove a commit.
-
-Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
-The possible behaviours are: ignore, warn, error.
-
-Rebasing (1/4)
-Rebasing (2/4)
-Rebasing (3/4)
-Rebasing (4/4)
-Successfully rebased and updated refs/heads/missing-commit.
-EOF
-
cr_to_nl () {
tr '\015' '\012'
}
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' '
+ cat >expect <<-EOF &&
+ Warning: some commits may have been dropped accidentally.
+ Dropped commits (newer to older):
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
+ To avoid this message, use "drop" to explicitly remove a commit.
+
+ Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings.
+ The possible behaviours are: ignore, warn, error.
+
+ Rebasing (1/4)
+ Rebasing (2/4)
+ Rebasing (3/4)
+ Rebasing (4/4)
+ Successfully rebased and updated refs/heads/missing-commit.
+ EOF
test_config rebase.missingCommitsCheck warn &&
rebase_setup_and_clean missing-commit &&
set_fake_editor &&
@@ -1335,21 +1329,20 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' '
test D = $(git cat-file commit HEAD | sed -ne \$p)
'
-cat >expect <<EOF
-Warning: some commits may have been dropped accidentally.
-Dropped commits (newer to older):
- - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
- - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2)
-To avoid this message, use "drop" to explicitly remove a commit.
-
-Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
-The possible behaviours are: ignore, warn, error.
-
-You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
-Or you can abort the rebase with 'git rebase --abort'.
-EOF
-
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' '
+ cat >expect <<-EOF &&
+ Warning: some commits may have been dropped accidentally.
+ Dropped commits (newer to older):
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
+ - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2)
+ To avoid this message, use "drop" to explicitly remove a commit.
+
+ Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings.
+ The possible behaviours are: ignore, warn, error.
+
+ You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''.
+ Or you can abort the rebase with '\''git rebase --abort'\''.
+ EOF
test_config rebase.missingCommitsCheck error &&
rebase_setup_and_clean missing-commit &&
set_fake_editor &&
--
2.22.0.589.g5bd7971b91
