[PATCH v4] fast-import: checkpoint: only write out refs and tags if we changed them

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At a checkpoint, fast-import resets all branches and tags on disk to the
OID that we have in memory. If --force is not given, only branch resets
that result in fast forwards with respect to the state on disk are
allowed. fast-import never updates its internal view of branches in
response to external changes.

Also, even for refs that fast-import has not been commanded to change
for a long time (or ever), at each checkpoint, we will systematically
reset them to the last state this process knows about, a state which may
have been set before the previous checkpoint. Any changes made to these
refs by a different process since the last checkpoint will be
overwritten.

1> is one process, 2> is another:

	1> $ git fast-import --force
	1> reset refs/heads/master
	1> from $A
	1> checkpoint
	2> $ git branch -f refs/heads/master $B
	1> reset refs/heads/tip  # not changing master!
	1> from $C
	1> checkpoint

At this point master points again to $A. (With this patch applied,
master points to $B.)

This problem is mitigated somewhat for branches when --force is not
specified (the default), as requiring a fast forward means in practice
that concurrent external changes are likely to be preserved. But it's
not foolproof either:

	1> $ git fast-import
	1> reset refs/heads/master
	1> from $A
	1> checkpoint
	2> $ git branch -f refs/heads/master refs/heads/master~1
	1> reset refs/heads/tip  # not changing master!
	1> from $C
	1> checkpoint

At this point, master points again to $A, not $A~1 as requested by the
second process. (With this patch applied, master points to $A~1.)

With this patch, we keep track of whether a particular branch or tag has
been changed by this fast-import process since our last checkpoint (or
startup). At the next checkpoint, only refs and tags that new commands
have changed are written to disk. To be clear, fast-import still does
not update its internal view of branches in response to external
changes, but now it avoids interfering with external changes unless
there was an explicit command to do so since the last checkpoint.

Note, therefore, that fast-import will still overwrite external changes
to some refs and tags. For example, with this patch applied, the change
made by process 2 will be overwritten:

	1> $ git fast-import --force
	1> reset refs/heads/master
	1> from $A
	1> checkpoint
	2> $ git branch -f refs/heads/master $B
	1> reset refs/heads/master
	1> from $C
	1> checkpoint

and master will point to $C.

Signed-off-by: Eric Rannaud <e@xxxxxxxxxxxxxxxx>
---
 fast-import.c          |  14 ++++++
 t/t9300-fast-import.sh | 106 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 104 insertions(+), 16 deletions(-)

diff --git a/fast-import.c b/fast-import.c
index f38d04fa5851..e9c3ea23ae42 100644
--- a/fast-import.c
+++ b/fast-import.c
@@ -103,6 +103,7 @@ struct branch {
 	uintmax_t num_notes;
 	unsigned active : 1;
 	unsigned delete : 1;
+	unsigned changed : 1;
 	unsigned pack_id : PACK_ID_BITS;
 	struct object_id oid;
 };
@@ -110,6 +111,7 @@ struct branch {
 struct tag {
 	struct tag *next_tag;
 	const char *name;
+	unsigned changed : 1;
 	unsigned int pack_id;
 	struct object_id oid;
 };
@@ -581,6 +583,7 @@ static struct branch *new_branch(const char *name)
 	b->branch_tree.versions[1].mode = S_IFDIR;
 	b->num_notes = 0;
 	b->active = 0;
+	b->changed = 0;
 	b->pack_id = MAX_PACK_ID;
 	branch_table[hc] = b;
 	branch_count++;
@@ -1571,6 +1574,10 @@ static int update_branch(struct branch *b)
 	struct object_id old_oid;
 	struct strbuf err = STRBUF_INIT;
 
+	if (!b->changed)
+		return 0;
+	b->changed = 0;
+
 	if (is_null_oid(&b->oid)) {
 		if (b->delete)
 			delete_ref(NULL, b->name, NULL, 0);
@@ -1636,6 +1643,10 @@ static void dump_tags(void)
 		goto cleanup;
 	}
 	for (t = first_tag; t; t = t->next_tag) {
+		if (!t->changed)
+			continue;
+		t->changed = 0;
+
 		strbuf_reset(&ref_name);
 		strbuf_addf(&ref_name, "refs/tags/%s", t->name);
 
@@ -2679,6 +2690,7 @@ static void parse_new_commit(const char *arg)
 
 	if (!store_object(OBJ_COMMIT, &new_data, NULL, &b->oid, next_mark))
 		b->pack_id = pack_id;
+	b->changed = 1;
 	b->last_commit = object_count_by_type[OBJ_COMMIT];
 }
 
@@ -2763,6 +2775,7 @@ static void parse_new_tag(const char *arg)
 		t->pack_id = MAX_PACK_ID;
 	else
 		t->pack_id = pack_id;
+	t->changed = 1;
 }
 
 static void parse_reset_branch(const char *arg)
@@ -2783,6 +2796,7 @@ static void parse_reset_branch(const char *arg)
 		b = new_branch(arg);
 	read_next_command();
 	parse_from(b);
+	b->changed = 1;
 	if (command_buf.len > 0)
 		unread_command_buf = 1;
 }
diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh
index 3668263c4046..12abaebb22b6 100755
--- a/t/t9300-fast-import.sh
+++ b/t/t9300-fast-import.sh
@@ -3121,14 +3121,23 @@ test_expect_success 'U: validate root delete result' '
 ### series V (checkpoint)
 ###
 
-# The commands in input_file should not produce any output on the file
-# descriptor set with --cat-blob-fd (or stdout if unspecified).
+# Instructions can be sent from $input_file to background_import() loop via the
+# fast-import progress command.
+# 
+# 	progress do: shell
+# Parse the next progress line and invoke it as a shell command.
+# 
+# 	progress do: checkpoint and stop
+# Send checkpoint and wait for its completion.
+# 
+# 	progress do: stop
+# Internal instruction.
 #
 # To make sure you're observing the side effects of checkpoint *before*
 # fast-import terminates (and thus writes out its state), check that the
 # fast-import process is still running using background_import_still_running
 # *after* evaluating the test conditions.
-background_import_then_checkpoint () {
+background_import () {
 	options=$1
 	input_file=$2
 
@@ -3153,22 +3162,30 @@ background_import_then_checkpoint () {
 	# pipes writing sequence. We want to assume that the write below could
 	# block, e.g. if fast-import blocks writing its own output to &9
 	# because there is no reader on &9 yet.
-	(
-		cat "$input_file"
-		echo "checkpoint"
-		echo "progress checkpoint"
-	) >&8 &
+	cat "$input_file" >&8 &
 
 	error=1 ;# assume the worst
 	while read output <&9
 	do
-		if test "$output" = "progress checkpoint"
+		if test "$output" = "progress do: shell"
+		then
+			read output <&9
+			shell_cmd="$(echo $output |sed -e 's/^progress //')"
+			$shell_cmd
+		elif test "$output" = "progress do: checkpoint and stop"
+		then
+			(
+				echo "checkpoint"
+				echo "progress do: stop"
+			) >&8 &
+		elif test "$output" = "progress do: stop"
 		then
 			error=0
 			break
+		else
+			# otherwise ignore cruft
+			echo >&2 "cruft: $output"
 		fi
-		# otherwise ignore cruft
-		echo >&2 "cruft: $output"
 	done
 
 	if test $error -eq 1
@@ -3189,10 +3206,11 @@ test_expect_success PIPE 'V: checkpoint helper does not get stuck with extra out
 	cat >input <<-INPUT_END &&
 	progress foo
 	progress bar
+	progress do: checkpoint and stop
 
 	INPUT_END
 
-	background_import_then_checkpoint "" input &&
+	background_import "" input &&
 	background_import_still_running
 '
 
@@ -3201,9 +3219,11 @@ test_expect_success PIPE 'V: checkpoint updates refs after reset' '
 	reset refs/heads/V
 	from refs/heads/U
 
+	progress do: checkpoint and stop
+
 	INPUT_END
 
-	background_import_then_checkpoint "" input &&
+	background_import "" input &&
 	test "$(git rev-parse --verify V)" = "$(git rev-parse --verify U)" &&
 	background_import_still_running
 '
@@ -3216,9 +3236,11 @@ test_expect_success PIPE 'V: checkpoint updates refs and marks after commit' '
 	data 0
 	from refs/heads/U
 
+	progress do: checkpoint and stop
+
 	INPUT_END
 
-	background_import_then_checkpoint "--export-marks=marks.actual" input &&
+	background_import "--export-marks=marks.actual" input &&
 
 	echo ":1 $(git rev-parse --verify V)" >marks.expected &&
 
@@ -3237,9 +3259,11 @@ test_expect_success PIPE 'V: checkpoint updates refs and marks after commit (no
 	data 0
 	from refs/heads/U
 
+	progress do: checkpoint and stop
+
 	INPUT_END
 
-	background_import_then_checkpoint "--export-marks=marks.actual" input &&
+	background_import "--export-marks=marks.actual" input &&
 
 	echo ":2 $(git rev-parse --verify V2)" >marks.expected &&
 
@@ -3255,13 +3279,63 @@ test_expect_success PIPE 'V: checkpoint updates tags after tag' '
 	tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
 	data 0
 
+	progress do: checkpoint and stop
+
 	INPUT_END
 
-	background_import_then_checkpoint "" input &&
+	background_import "" input &&
 	git show-ref -d Vtag &&
 	background_import_still_running
 '
 
+test_expect_success PIPE 'V: checkpoint only resets changed branches' '
+	cat >input <<-INPUT_END &&
+	reset refs/heads/V3
+	from refs/heads/U
+
+	checkpoint
+
+	progress do: shell
+	progress git branch -f V3 V
+
+	reset refs/heads/V4
+	from refs/heads/U
+
+	progress do: checkpoint and stop
+
+	INPUT_END
+
+	background_import "--force" input &&
+	test "$(git rev-parse --verify V3)" = "$(git rev-parse --verify V)" &&
+	background_import_still_running
+'
+
+test_expect_success PIPE 'V: checkpoint only updates changed tags' '
+	cat >input <<-INPUT_END &&
+	tag Vtag2
+	from refs/heads/U
+	tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+	data 0
+
+	checkpoint
+
+	progress do: shell
+	progress git tag -f Vtag2 V
+
+	tag Vtag3
+	from refs/heads/U
+	tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+	data 0
+
+	progress do: checkpoint and stop
+
+	INPUT_END
+
+	background_import "" input &&
+	test "$(git show-ref -d Vtag2 |tail -1 |awk \{print\ \$1\})" = "$(git rev-parse --verify V)" &&
+	background_import_still_running
+'
+
 ###
 ### series W (get-mark and empty orphan commits)
 ###
-- 
2.21.0




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux