In Git's tests, there is typically no space between the redirection
operator and the filename. Remove these spaces.
Since output is silenced when running without `-v` and debugging
output is useful with `-v`, remove redirections to /dev/null.
Change here-docs from `<<\EOF` to `<<-\EOF` so that they can be indented
along with the rest of the test case.
Finally, refactor to remove Git commands upstream of pipe. This way, if
an invocation of a Git command fails, the return code won't be lost.
Keep upstream non-Git commands since we have to assume a base level of
sanity.
Signed-off-by: Denton Liu <liu.denton@xxxxxxxxx>
---
t/t4014-format-patch.sh | 614 +++++++++++++++++++++-------------------
1 file changed, 319 insertions(+), 295 deletions(-)
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh
index b6e2fdbc44..3423f974bc 100755
--- a/t/t4014-format-patch.sh
+++ b/t/t4014-format-patch.sh
@@ -34,7 +34,8 @@ test_expect_success setup '
git commit -m "Side changes #3 with \\n backslash-n in it." &&
git checkout master &&
- git diff-tree -p C2 | git apply --index &&
+ git diff-tree -p C2 >patch &&
+ git apply --index <patch &&
test_tick &&
git commit -m "Master accepts moral equivalent of #2"
@@ -77,7 +78,7 @@ test_expect_success "format-patch doesn't consider merge commits" '
git checkout -b merger master &&
test_tick &&
git merge --no-ff slave &&
- cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) &&
+ cnt=$(git format-patch -3 --stdout >patch && grep "^From " patch | wc -l) &&
test $cnt = 3
'
@@ -85,21 +86,22 @@ test_expect_success "format-patch result applies" '
git checkout -b rebuild-0 master &&
git am -3 patch0 &&
- cnt=$(git rev-list master.. | wc -l) &&
- test $cnt = 2
+ git rev-list master.. >list &&
+ test_line_count = 2 list
'
test_expect_success "format-patch --ignore-if-in-upstream result applies" '
git checkout -b rebuild-1 master &&
git am -3 patch1 &&
- cnt=$(git rev-list master.. | wc -l) &&
- test $cnt = 2
+ git rev-list master.. >list &&
+ test_line_count = 2 list
'
test_expect_success 'commit did not screw up the log message' '
- git cat-file commit side | grep "^Side .* with .* backslash-n"
+ git cat-file commit side >actual &&
+ grep "^Side .* with .* backslash-n" actual
'
@@ -112,7 +114,8 @@ test_expect_success 'format-patch did not screw up the log message' '
test_expect_success 'replay did not screw up the log message' '
- git cat-file commit rebuild-1 | grep "^Side .* with .* backslash-n"
+ git cat-file commit rebuild-1 >actual &&
+ grep "^Side .* with .* backslash-n" actual
'
@@ -122,8 +125,8 @@ test_expect_success 'extra headers' '
" &&
git config --add format.headers "Cc: S E Cipient <scipient@xxxxxxxxxxx>
" &&
- git format-patch --stdout master..side > patch2 &&
- sed -e "/^\$/q" patch2 > hdrs2 &&
+ git format-patch --stdout master..side >patch2 &&
+ sed -e "/^\$/q" patch2 >hdrs2 &&
grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs2 &&
grep "^Cc: S E Cipient <scipient@xxxxxxxxxxx>\$" hdrs2
@@ -134,7 +137,7 @@ test_expect_success 'extra headers without newlines' '
git config --replace-all format.headers "To: R E Cipient <rcipient@xxxxxxxxxxx>" &&
git config --add format.headers "Cc: S E Cipient <scipient@xxxxxxxxxxx>" &&
git format-patch --stdout master..side >patch3 &&
- sed -e "/^\$/q" patch3 > hdrs3 &&
+ sed -e "/^\$/q" patch3 >hdrs3 &&
grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs3 &&
grep "^Cc: S E Cipient <scipient@xxxxxxxxxxx>\$" hdrs3
@@ -144,8 +147,8 @@ test_expect_success 'extra headers with multiple To:s' '
git config --replace-all format.headers "To: R E Cipient <rcipient@xxxxxxxxxxx>" &&
git config --add format.headers "To: S E Cipient <scipient@xxxxxxxxxxx>" &&
- git format-patch --stdout master..side > patch4 &&
- sed -e "/^\$/q" patch4 > hdrs4 &&
+ git format-patch --stdout master..side >patch4 &&
+ sed -e "/^\$/q" patch4 >hdrs4 &&
grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>,\$" hdrs4 &&
grep "^ *S E Cipient <scipient@xxxxxxxxxxx>\$" hdrs4
'
@@ -153,72 +156,82 @@ test_expect_success 'extra headers with multiple To:s' '
test_expect_success 'additional command line cc (ascii)' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --cc="S E Cipient <scipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch5 &&
- grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" patch5 &&
- grep "^ *S E Cipient <scipient@xxxxxxxxxxx>\$" patch5
+ git format-patch --cc="S E Cipient <scipient@xxxxxxxxxxx>" --stdout master..side >patch5 &&
+ sed -e "/^\$/q" patch5 >hdrs5 &&
+ grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" hdrs5 &&
+ grep "^ *S E Cipient <scipient@xxxxxxxxxxx>\$" hdrs5
'
test_expect_failure 'additional command line cc (rfc822)' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --cc="S. E. Cipient <scipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch5 &&
- grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" patch5 &&
- grep "^ *\"S. E. Cipient\" <scipient@xxxxxxxxxxx>\$" patch5
+ git format-patch --cc="S. E. Cipient <scipient@xxxxxxxxxxx>" --stdout master..side >patch5 &&
+ sed -e "/^\$/q" patch5 >hdrs5 &&
+ grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" hdrs5 &&
+ grep "^ *\"S. E. Cipient\" <scipient@xxxxxxxxxxx>\$" hdrs5
'
test_expect_success 'command line headers' '
git config --unset-all format.headers &&
- git format-patch --add-header="Cc: R E Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch6 &&
- grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>\$" patch6
+ git format-patch --add-header="Cc: R E Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side >patch6 &&
+ sed -e "/^\$/q" patch6 >hdrs6 &&
+ grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs6
'
test_expect_success 'configuration headers and command line headers' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --add-header="Cc: S E Cipient <scipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch7 &&
- grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" patch7 &&
- grep "^ *S E Cipient <scipient@xxxxxxxxxxx>\$" patch7
+ git format-patch --add-header="Cc: S E Cipient <scipient@xxxxxxxxxxx>" --stdout master..side >patch7 &&
+ sed -e "/^\$/q" patch7 >hdrs7 &&
+ grep "^Cc: R E Cipient <rcipient@xxxxxxxxxxx>,\$" hdrs7 &&
+ grep "^ *S E Cipient <scipient@xxxxxxxxxxx>\$" hdrs7
'
test_expect_success 'command line To: header (ascii)' '
git config --unset-all format.headers &&
- git format-patch --to="R E Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" patch8
+ git format-patch --to="R E Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs8
'
test_expect_failure 'command line To: header (rfc822)' '
- git format-patch --to="R. E. Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: \"R. E. Cipient\" <rcipient@xxxxxxxxxxx>\$" patch8
+ git format-patch --to="R. E. Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: \"R. E. Cipient\" <rcipient@xxxxxxxxxxx>\$" hdrs8
'
test_expect_failure 'command line To: header (rfc2047)' '
- git format-patch --to="R Ä Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@xxxxxxxxxxx>\$" patch8
+ git format-patch --to="R Ä Cipient <rcipient@xxxxxxxxxxx>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@xxxxxxxxxxx>\$" hdrs8
'
test_expect_success 'configuration To: header (ascii)' '
git config format.to "R E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs9
'
test_expect_failure 'configuration To: header (rfc822)' '
git config format.to "R. E. Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: \"R. E. Cipient\" <rcipient@xxxxxxxxxxx>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: \"R. E. Cipient\" <rcipient@xxxxxxxxxxx>\$" hdrs9
'
test_expect_failure 'configuration To: header (rfc2047)' '
git config format.to "R Ä Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@xxxxxxxxxxx>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@xxxxxxxxxxx>\$" hdrs9
'
# check_patch <patch>: Verify that <patch> looks like a half-sane
@@ -231,52 +244,52 @@ check_patch () {
test_expect_success 'format.from=false' '
- git -c format.from=false format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
+ git -c format.from=false format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
check_patch patch &&
- ! grep "^From: C O Mitter <committer@xxxxxxxxxxx>\$" patch
+ ! grep "^From: C O Mitter <committer@xxxxxxxxxxx>\$" hdrs
'
test_expect_success 'format.from=true' '
- git -c format.from=true format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- grep "^From: C O Mitter <committer@xxxxxxxxxxx>\$" patch
+ git -c format.from=true format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ grep "^From: C O Mitter <committer@xxxxxxxxxxx>\$" hdrs
'
test_expect_success 'format.from with address' '
- git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- grep "^From: F R Om <from@xxxxxxxxxxx>\$" patch
+ git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ grep "^From: F R Om <from@xxxxxxxxxxx>\$" hdrs
'
test_expect_success '--no-from overrides format.from' '
- git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --no-from --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- ! grep "^From: F R Om <from@xxxxxxxxxxx>\$" patch
+ git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --no-from --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ ! grep "^From: F R Om <from@xxxxxxxxxxx>\$" hdrs
'
test_expect_success '--from overrides format.from' '
- git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --from --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- ! grep "^From: F R Om <from@xxxxxxxxxxx>\$" patch
+ git -c format.from="F R Om <from@xxxxxxxxxxx>" format-patch --from --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ ! grep "^From: F R Om <from@xxxxxxxxxxx>\$" hdrs
'
test_expect_success '--no-to overrides config.to' '
git config --replace-all format.to \
"R E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --no-to --stdout master..side |
- sed -e "/^\$/q" >patch10 &&
- check_patch patch10 &&
- ! grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" patch10
+ git format-patch --no-to --stdout master..side >patch10 &&
+ sed -e "/^\$/q" patch10 >hdrs10 &&
+ check_patch hdrs10 &&
+ ! grep "^To: R E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs10
'
test_expect_success '--no-to and --to replaces config.to' '
@@ -284,31 +297,31 @@ test_expect_success '--no-to and --to replaces config.to' '
git config --replace-all format.to \
"Someone <someone@out.there>" &&
git format-patch --no-to --to="Someone Else <else@out.there>" \
- --stdout master..side |
- sed -e "/^\$/q" >patch11 &&
- check_patch patch11 &&
- ! grep "^To: Someone <someone@out.there>\$" patch11 &&
- grep "^To: Someone Else <else@out.there>\$" patch11
+ --stdout master..side >patch11 &&
+ sed -e "/^\$/q" patch11 >hdrs11 &&
+ check_patch hdrs11 &&
+ ! grep "^To: Someone <someone@out.there>\$" hdrs11 &&
+ grep "^To: Someone Else <else@out.there>\$" hdrs11
'
test_expect_success '--no-cc overrides config.cc' '
git config --replace-all format.cc \
"C E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --no-cc --stdout master..side |
- sed -e "/^\$/q" >patch12 &&
- check_patch patch12 &&
- ! grep "^Cc: C E Cipient <rcipient@xxxxxxxxxxx>\$" patch12
+ git format-patch --no-cc --stdout master..side >patch12 &&
+ sed -e "/^\$/q" patch12 >hdrs12 &&
+ check_patch hdrs12 &&
+ ! grep "^Cc: C E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs12
'
test_expect_success '--no-add-header overrides config.headers' '
git config --replace-all format.headers \
"Header1: B E Cipient <rcipient@xxxxxxxxxxx>" &&
- git format-patch --no-add-header --stdout master..side |
- sed -e "/^\$/q" >patch13 &&
- check_patch patch13 &&
- ! grep "^Header1: B E Cipient <rcipient@xxxxxxxxxxx>\$" patch13
+ git format-patch --no-add-header --stdout master..side >patch13 &&
+ sed -e "/^\$/q" patch13 >hdrs13 &&
+ check_patch hdrs13 &&
+ ! grep "^Header1: B E Cipient <rcipient@xxxxxxxxxxx>\$" hdrs13
'
test_expect_success 'multiple files' '
@@ -338,7 +351,7 @@ test_expect_success 'reroll count (-v)' '
check_threading () {
expect="$1" &&
shift &&
- (git format-patch --stdout "$@"; echo $? > status.out) |
+ (git format-patch --stdout "$@"; echo $? >status.out) |
# Prints everything between the Message-ID and In-Reply-To,
# and replaces all Message-ID-lookalikes by a sequence number
perl -ne '
@@ -353,12 +366,12 @@ check_threading () {
print;
}
print "---\n" if /^From /i;
- ' > actual &&
+ ' >actual &&
test 0 = "$(cat status.out)" &&
test_cmp "$expect" actual
}
-cat >> expect.no-threading <<EOF
+cat >>expect.no-threading <<EOF
---
---
---
@@ -369,7 +382,7 @@ test_expect_success 'no threading' '
check_threading expect.no-threading master
'
-cat > expect.thread <<EOF
+cat >expect.thread <<EOF
---
Message-Id: <0>
---
@@ -386,7 +399,7 @@ test_expect_success 'thread' '
check_threading expect.thread --thread master
'
-cat > expect.in-reply-to <<EOF
+cat >expect.in-reply-to <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -406,7 +419,7 @@ test_expect_success 'thread in-reply-to' '
--thread master
'
-cat > expect.cover-letter <<EOF
+cat >expect.cover-letter <<EOF
---
Message-Id: <0>
---
@@ -427,7 +440,7 @@ test_expect_success 'thread cover-letter' '
check_threading expect.cover-letter --cover-letter --thread master
'
-cat > expect.cl-irt <<EOF
+cat >expect.cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -459,7 +472,7 @@ test_expect_success 'thread explicit shallow' '
--in-reply-to="<test.message>" --thread=shallow master
'
-cat > expect.deep <<EOF
+cat >expect.deep <<EOF
---
Message-Id: <0>
---
@@ -477,7 +490,7 @@ test_expect_success 'thread deep' '
check_threading expect.deep --thread=deep master
'
-cat > expect.deep-irt <<EOF
+cat >expect.deep-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -500,7 +513,7 @@ test_expect_success 'thread deep in-reply-to' '
--in-reply-to="<test.message>" master
'
-cat > expect.deep-cl <<EOF
+cat >expect.deep-cl <<EOF
---
Message-Id: <0>
---
@@ -524,7 +537,7 @@ test_expect_success 'thread deep cover-letter' '
check_threading expect.deep-cl --cover-letter --thread=deep master
'
-cat > expect.deep-cl-irt <<EOF
+cat >expect.deep-cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -606,7 +619,7 @@ test_expect_success 'cover-letter inherits diff options' '
'
-cat > expect << EOF
+cat >expect <<EOF
This is an excessively long subject line for a message due to the
habit some projects have of not having a short, one-line subject at
the start of the commit message, but rather sticking a whole
@@ -619,12 +632,12 @@ EOF
test_expect_success 'shortlog of cover-letter wraps overly-long onelines' '
git format-patch --cover-letter -2 &&
- sed -e "1,/A U Thor/d" -e "/^\$/q" < 0000-cover-letter.patch > output &&
+ sed -e "1,/A U Thor/d" -e "/^\$/q" <0000-cover-letter.patch >output &&
test_cmp expect output
'
-cat > expect << EOF
+cat >expect <<EOF
index $before..$after 100644
--- a/file
+++ b/file
@@ -646,7 +659,7 @@ test_expect_success 'format-patch respects -U' '
'
-cat > expect << EOF
+cat >expect <<EOF
diff --git a/file b/file
index $before..$after 100644
@@ -662,7 +675,7 @@ EOF
test_expect_success 'format-patch -p suppresses stat' '
git format-patch -p -2 &&
- sed -e "1,/^\$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output &&
+ sed -e "1,/^\$/d" -e "/^+5/q" <0001-This-is-an-excessively-long-subject-line-for-a-messa.patch >output &&
test_cmp expect output
'
@@ -717,7 +730,7 @@ test_expect_success 'format-patch from a subdirectory (3)' '
'
test_expect_success 'format-patch --in-reply-to' '
- git format-patch -1 --stdout --in-reply-to "baz@xxxxxxx" > patch8 &&
+ git format-patch -1 --stdout --in-reply-to "baz@xxxxxxx" >patch8 &&
grep "^In-Reply-To: <baz@xxxxxxx>" patch8 &&
grep "^References: <baz@xxxxxxx>" patch8
'
@@ -738,20 +751,20 @@ test_expect_success 'format-patch --notes --signoff' '
sed "1,/^---$/d" out | grep "test message"
'
-echo "fatal: --name-only does not make sense" > expect.name-only
-echo "fatal: --name-status does not make sense" > expect.name-status
-echo "fatal: --check does not make sense" > expect.check
+echo "fatal: --name-only does not make sense" >expect.name-only
+echo "fatal: --name-status does not make sense" >expect.name-status
+echo "fatal: --check does not make sense" >expect.check
test_expect_success 'options no longer allowed for format-patch' '
- test_must_fail git format-patch --name-only 2> output &&
+ test_must_fail git format-patch --name-only 2>output &&
test_i18ncmp expect.name-only output &&
- test_must_fail git format-patch --name-status 2> output &&
+ test_must_fail git format-patch --name-status 2>output &&
test_i18ncmp expect.name-status output &&
- test_must_fail git format-patch --check 2> output &&
+ test_must_fail git format-patch --check 2>output &&
test_i18ncmp expect.check output'
test_expect_success 'format-patch --numstat should produce a patch' '
- git format-patch --numstat --stdout master..side > output &&
+ git format-patch --numstat --stdout master..side >output &&
test 5 = $(grep "^diff --git a/" output | wc -l)'
test_expect_success 'format-patch -- <path>' '
@@ -763,20 +776,22 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' '
git format-patch --ignore-if-in-upstream HEAD
'
-git_version="$(git --version | sed "s/.* //")"
+git_version="$(git --version >version && sed "s/.* //" version)"
signature() {
printf "%s\n%s\n\n" "-- " "${1:-$git_version}"
}
test_expect_success 'format-patch default signature' '
- git format-patch --stdout -1 | tail -n 3 >output &&
+ git format-patch --stdout -1 >patch &&
+ tail -n 3 patch >output &&
signature >expect &&
test_cmp expect output
'
test_expect_success 'format-patch --signature' '
- git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output &&
+ git format-patch --stdout --signature="my sig" -1 >patch &&
+ tail -n 3 patch >output &&
signature "my sig" >expect &&
test_cmp expect output
'
@@ -1167,282 +1182,282 @@ append_signoff()
test_expect_success 'signoff: commit with no body' '
append_signoff </dev/null >actual &&
- cat <<\EOF | sed "s/EOL$//" >expected &&
-4:Subject: [PATCH] EOL
-8:
-9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ cat <<-\EOF | sed "s/EOL$//" >expected &&
+ 4:Subject: [PATCH] EOL
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: commit with only subject' '
echo subject | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: commit with only subject that does not end with NL' '
printf subject | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: no existing signoffs' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ body
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: no existing signoffs and no trailing NL' '
printf "subject\n\nbody" | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: some random signoff' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: my@house
-12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Signed-off-by: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: my@house
+ 12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: misc conforming footer elements' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: my@house
-(cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709)
-Tested-by: Some One <someone@xxxxxxxxxxx>
-Bug: 1234
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: my@house
-15:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Signed-off-by: my@house
+ (cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709)
+ Tested-by: Some One <someone@xxxxxxxxxxx>
+ Bug: 1234
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: my@house
+ 15:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: some random signoff-alike' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
-Fooled-by-me: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:
-12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ body
+ Fooled-by-me: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:
+ 12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: not really a signoff' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-I want to mention about Signed-off-by: here.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:I want to mention about Signed-off-by: here.
-10:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ I want to mention about Signed-off-by: here.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:I want to mention about Signed-off-by: here.
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: not really a signoff (2)' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-My unfortunate
-Signed-off-by: example happens to be wrapped here.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:Signed-off-by: example happens to be wrapped here.
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ My unfortunate
+ Signed-off-by: example happens to be wrapped here.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:Signed-off-by: example happens to be wrapped here.
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: valid S-o-b paragraph in the middle' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Signed-off-by: my@house
-Signed-off-by: your@house
+ Signed-off-by: my@house
+ Signed-off-by: your@house
-A lot of houses.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: my@house
-10:Signed-off-by: your@house
-11:
-13:
-14:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ A lot of houses.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: my@house
+ 10:Signed-off-by: your@house
+ 11:
+ 13:
+ 14:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff at the end' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff at the end, no trailing NL' '
printf "subject\n\nSigned-off-by: C O Mitter <committer@xxxxxxxxxxx>" |
append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff NOT at the end' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-Signed-off-by: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-12:Signed-off-by: my@house
-EOF
+ Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ Signed-off-by: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ 12:Signed-off-by: my@house
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: tolerate garbage in conforming footer' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Tested-by: my@house
-Some Trash
-Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-13:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Tested-by: my@house
+ Some Trash
+ Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 13:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: respect trailer config' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Myfooter: x
-Some Trash
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:
-12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Myfooter: x
+ Some Trash
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:
+ 12:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual &&
test_config trailer.Myfooter.ifexists add &&
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Myfooter: x
-Some Trash
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Myfooter: x
+ Some Trash
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: footer begins with non-signoff without @ sign' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Reviewed-id: Noone
-Tested-by: my@house
-Change-id: Ideadbeef
-Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-Bug: 1234
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-14:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
-EOF
+ Reviewed-id: Noone
+ Tested-by: my@house
+ Change-id: Ideadbeef
+ Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ Bug: 1234
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 14:Signed-off-by: C O Mitter <committer@xxxxxxxxxxx>
+ EOF
test_cmp expected actual
'
@@ -1458,42 +1473,42 @@ test_expect_success 'cover letter using branch description (1)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter master >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (2)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter rebuild-1~2..rebuild-1 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (3)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter ^master rebuild-1 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (4)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter master.. >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (5)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter -2 HEAD >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (6)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter -2 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter with nothing' '
@@ -1547,7 +1562,8 @@ test_expect_success 'format-patch format.outputDirectory option' '
test_config format.outputDirectory patches &&
rm -fr patches &&
git format-patch master..side &&
- test $(git rev-list master..side | wc -l) -eq $(ls patches | wc -l)
+ git rev-list master..side >list &&
+ test_line_count = $(ls patches | wc -l) list
'
test_expect_success 'format-patch -o overrides format.outputDirectory' '
@@ -1560,13 +1576,21 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' '
test_expect_success 'format-patch --base' '
git checkout side &&
- git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 &&
- git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 &&
+ git format-patch --stdout --base=HEAD~3 -1 >patch &&
+ tail -n 7 patch >actual1 &&
+ git format-patch --stdout --base=HEAD~3 HEAD~.. >patch &&
+ tail -n 7 patch >actual2 &&
echo >expected &&
echo "base-commit: $(git rev-parse HEAD~3)" >>expected &&
- echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected &&
- echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected &&
- signature >> expected &&
+ git show --patch HEAD~2 >patch &&
+ git patch-id --stable <patch >patch.id.raw &&
+ awk "{print \$1}" <patch.id.raw >patch.id &&
+ echo "prerequisite-patch-id: $(cat patch.id)" >>expected &&
+ git show --patch HEAD~1 >patch &&
+ git patch-id --stable <patch >patch.id.raw &&
+ awk "{print \$1}" <patch.id.raw >patch.id &&
+ echo "prerequisite-patch-id: $(cat patch.id)" >>expected &&
+ signature >>expected &&
test_cmp expected actual1 &&
test_cmp expected actual2
'
--
2.22.0.rc1.169.g49223abbf8
