[PATCH 42/59] config.txt: move protocol.* to a separate file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@xxxxxxxxx>
---
 Documentation/config.txt          | 65 +------------------------------
 Documentation/protocol-config.txt | 64 ++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 64 deletions(-)
 create mode 100644 Documentation/protocol-config.txt

diff --git a/Documentation/config.txt b/Documentation/config.txt
index 364e5fdbf1..f57b494041 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -634,70 +634,7 @@ include::pager-config.txt[]
 
 include::pretty-config.txt[]
 
-protocol.allow::
-	If set, provide a user defined default policy for all protocols which
-	don't explicitly have a policy (`protocol.<name>.allow`).  By default,
-	if unset, known-safe protocols (http, https, git, ssh, file) have a
-	default policy of `always`, known-dangerous protocols (ext) have a
-	default policy of `never`, and all other protocols have a default
-	policy of `user`.  Supported policies:
-+
---
-
-* `always` - protocol is always able to be used.
-
-* `never` - protocol is never able to be used.
-
-* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
-  either unset or has a value of 1.  This policy should be used when you want a
-  protocol to be directly usable by the user but don't want it used by commands which
-  execute clone/fetch/push commands without user input, e.g. recursive
-  submodule initialization.
-
---
-
-protocol.<name>.allow::
-	Set a policy to be used by protocol `<name>` with clone/fetch/push
-	commands. See `protocol.allow` above for the available policies.
-+
-The protocol names currently used by git are:
-+
---
-  - `file`: any local file-based path (including `file://` URLs,
-    or local paths)
-
-  - `git`: the anonymous git protocol over a direct TCP
-    connection (or proxy, if configured)
-
-  - `ssh`: git over ssh (including `host:path` syntax,
-    `ssh://`, etc).
-
-  - `http`: git over http, both "smart http" and "dumb http".
-    Note that this does _not_ include `https`; if you want to configure
-    both, you must do so individually.
-
-  - any external helpers are named by their protocol (e.g., use
-    `hg` to allow the `git-remote-hg` helper)
---
-
-protocol.version::
-	Experimental. If set, clients will attempt to communicate with a
-	server using the specified protocol version.  If unset, no
-	attempt will be made by the client to communicate using a
-	particular protocol version, this results in protocol version 0
-	being used.
-	Supported versions:
-+
---
-
-* `0` - the original wire protocol.
-
-* `1` - the original wire protocol with the addition of a version string
-  in the initial response from the server.
-
-* `2` - link:technical/protocol-v2.html[wire protocol version 2].
-
---
+include::protocol-config.txt[]
 
 include::pull-config.txt[]
 
diff --git a/Documentation/protocol-config.txt b/Documentation/protocol-config.txt
new file mode 100644
index 0000000000..bfccc07491
--- /dev/null
+++ b/Documentation/protocol-config.txt
@@ -0,0 +1,64 @@
+protocol.allow::
+	If set, provide a user defined default policy for all protocols which
+	don't explicitly have a policy (`protocol.<name>.allow`).  By default,
+	if unset, known-safe protocols (http, https, git, ssh, file) have a
+	default policy of `always`, known-dangerous protocols (ext) have a
+	default policy of `never`, and all other protocols have a default
+	policy of `user`.  Supported policies:
++
+--
+
+* `always` - protocol is always able to be used.
+
+* `never` - protocol is never able to be used.
+
+* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
+  either unset or has a value of 1.  This policy should be used when you want a
+  protocol to be directly usable by the user but don't want it used by commands which
+  execute clone/fetch/push commands without user input, e.g. recursive
+  submodule initialization.
+
+--
+
+protocol.<name>.allow::
+	Set a policy to be used by protocol `<name>` with clone/fetch/push
+	commands. See `protocol.allow` above for the available policies.
++
+The protocol names currently used by git are:
++
+--
+  - `file`: any local file-based path (including `file://` URLs,
+    or local paths)
+
+  - `git`: the anonymous git protocol over a direct TCP
+    connection (or proxy, if configured)
+
+  - `ssh`: git over ssh (including `host:path` syntax,
+    `ssh://`, etc).
+
+  - `http`: git over http, both "smart http" and "dumb http".
+    Note that this does _not_ include `https`; if you want to configure
+    both, you must do so individually.
+
+  - any external helpers are named by their protocol (e.g., use
+    `hg` to allow the `git-remote-hg` helper)
+--
+
+protocol.version::
+	Experimental. If set, clients will attempt to communicate with a
+	server using the specified protocol version.  If unset, no
+	attempt will be made by the client to communicate using a
+	particular protocol version, this results in protocol version 0
+	being used.
+	Supported versions:
++
+--
+
+* `0` - the original wire protocol.
+
+* `1` - the original wire protocol with the addition of a version string
+  in the initial response from the server.
+
+* `2` - link:technical/protocol-v2.html[wire protocol version 2].
+
+--
-- 
2.19.1.647.g708186aaf9




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux