On Thu, Aug 16, 2018 at 10:35:53PM +0200, Ævar Arnfjörð Bjarmason wrote: > This is all interesting, but I think unrelated to what Ulrich is talking > about. Quote: > > Between the two phases of "git fsck" (checking directories and > checking objects) there was a break of several seconds where no > progress was indicated > > I.e. it's not about the pause you get with your testcase (which is > certainly another issue) but the break between the two progress bars. I think he's talking about both. What I said responds to this: > >> During "git gc" the writing objects phase did not update for some > >> seconds, but then the percentage counter jumped like from 15% to 42%. But yeah, I missed that the fsck thing was specifically about a break between two meters. That's a separate problem, but also worth discussing (and hopefully much easier to address). > If you fsck this repository it'll take around (on my spinning rust > server) 30 seconds between 100% of "Checking object directories" before > you get any output from "Checking objects". > > The breakdown of that is (this is from approximate eyeballing): > > * We spend 1-3 seconds just on this: > https://github.com/git/git/blob/63749b2dea5d1501ff85bab7b8a7f64911d21dea/pack-check.c#L181 OK, so that's checking the sha1 over the .idx file. We could put a meter on that. I wouldn't expect it to generally be all that slow outside of pathological cases, since it scales with the number of objects (and 1s is our minimum update anyway, so that might be OK as-is). Your case has 13M objects, which is quite large. > * We spend the majority of the ~30s on this: > https://github.com/git/git/blob/63749b2dea5d1501ff85bab7b8a7f64911d21dea/pack-check.c#L70-L79 This is hashing the actual packfile. This is potentially quite long, especially if you have a ton of big objects. I wonder if we need to do this as a separate step anyway, though. Our verification is based on index-pack these days, which means it's going to walk over the whole content as part of the "Indexing objects" step to expand base objects and mark deltas for later. Could we feed this hash as part of that walk over the data? It's not going to save us 30s, but it's likely to be more efficient. And it would fold the effort naturally into the existing progress meter. > * Wes spend another 3-5 seconds on this QSORT: > https://github.com/git/git/blob/63749b2dea5d1501ff85bab7b8a7f64911d21dea/pack-check.c#L105 That's a tough one. I'm not sure how we'd count it (how many compares we do?). And each item is doing so little work that hitting the progress code may make things noticeably slower. Again, your case is pretty big. Just based on the number of objects, linux.git should be 1.5-2.5 seconds on your machine for the same operation. Which I think may be small enough to ignore (or even just print a generic before/after). It's really the 30s packfile hash that's making the whole thing so terrible. -Peff
