[PATCH v10 06/36] directory rename detection: testcases checking which side did the rename

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reviewed-by: Stefan Beller <sbeller@xxxxxxxxxx>
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
Signed-off-by: Junio C Hamano <gitster@xxxxxxxxx>
---
 t/t6043-merge-rename-directories.sh | 336 ++++++++++++++++++++++++++++
 1 file changed, 336 insertions(+)

diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh
index b469c807c2..9ae245a522 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -1180,4 +1180,340 @@ test_expect_failure '5d-check: Directory/file/file conflict due to directory ren
 #   back to old handling.  But, sadly, see testcases 8a and 8b.
 ###########################################################################
 
+
+###########################################################################
+# SECTION 6: Same side of the merge was the one that did the rename
+#
+# It may sound obvious that you only want to apply implicit directory
+# renames to directories if the _other_ side of history did the renaming.
+# If you did make an implementation that didn't explicitly enforce this
+# rule, the majority of cases that would fall under this section would
+# also be solved by following the rules from the above sections.  But
+# there are still a few that stick out, so this section covers them just
+# to make sure we also get them right.
+###########################################################################
+
+# Testcase 6a, Tricky rename/delete
+#   Commit O: z/{b,c,d}
+#   Commit A: z/b
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL)
+#   Note: We're just checking here that the rename of z/b and z/c to put
+#         them under y/ doesn't accidentally catch z/d and make it look like
+#         it is also involved in a rename/delete conflict.
+
+test_expect_success '6a-setup: Tricky rename/delete' '
+	test_create_repo 6a &&
+	(
+		cd 6a &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		echo d >z/d &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git rm z/c &&
+		git rm z/d &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		mkdir y &&
+		git mv z/b y/ &&
+		git mv z/c y/ &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6a-check: Tricky rename/delete' '
+	(
+		cd 6a &&
+
+		git checkout A^0 &&
+
+		test_must_fail git merge -s recursive B^0 >out &&
+		test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out &&
+
+		git ls-files -s >out &&
+		test_line_count = 2 out &&
+		git ls-files -u >out &&
+		test_line_count = 1 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			:0:y/b :3:y/c &&
+		git rev-parse >expect \
+			 O:z/b  O:z/c &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6b, Same rename done on both sides
+#   (Related to testcases 6c and 8e)
+#   Commit O: z/{b,c}
+#   Commit A: y/{b,c}
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   Note: If we did directory rename detection here, we'd move z/d into y/,
+#         but B did that rename and still decided to put the file into z/,
+#         so we probably shouldn't apply directory rename detection for it.
+
+test_expect_success '6b-setup: Same rename done on both sides' '
+	test_create_repo 6b &&
+	(
+		cd 6b &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git mv z y &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		mkdir z &&
+		echo d >z/d &&
+		git add z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6b-check: Same rename done on both sides' '
+	(
+		cd 6b &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6c, Rename only done on same side
+#   (Related to testcases 6b and 8e)
+#   Commit O: z/{b,c}
+#   Commit A: z/{b,c} (no change)
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   NOTE: Seems obvious, but just checking that the implementation doesn't
+#         "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6c-setup: Rename only done on same side' '
+	test_create_repo 6c &&
+	(
+		cd 6c &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		mkdir z &&
+		echo d >z/d &&
+		git add z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6c-check: Rename only done on same side' '
+	(
+		cd 6c &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6d, We don't always want transitive renaming
+#   (Related to testcase 1c)
+#   Commit O: z/{b,c}, x/d
+#   Commit A: z/{b,c}, x/d (no change)
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   NOTE: Again, this seems obvious but just checking that the implementation
+#         doesn't "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6d-setup: We do not always want transitive renaming' '
+	test_create_repo 6d &&
+	(
+		cd 6d &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		mkdir x &&
+		echo d >x/d &&
+		git add z x &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		git mv x z &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6d-check: We do not always want transitive renaming' '
+	(
+		cd 6d &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    O:x/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6e, Add/add from one-side
+#   Commit O: z/{b,c}
+#   Commit A: z/{b,c} (no change)
+#   Commit B: y/{b,c,d_1}, z/d_2
+#   Expected: y/{b,c,d_1}, z/d_2
+#   NOTE: Again, this seems obvious but just checking that the implementation
+#         doesn't "accidentally detect a rename" and give us y/{b,c} +
+#         add/add conflict on y/d_1 vs y/d_2.
+
+test_expect_success '6e-setup: Add/add from one side' '
+	test_create_repo 6e &&
+	(
+		cd 6e &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		echo d1 > y/d &&
+		mkdir z &&
+		echo d2 > z/d &&
+		git add y/d z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6e-check: Add/add from one side' '
+	(
+		cd 6e &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 4 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:y/d    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+###########################################################################
+# Rules suggested by section 6:
+#
+#   Only apply implicit directory renames to directories if the other
+#   side of history is the one doing the renaming.
+###########################################################################
+
 test_done
-- 
2.17.0.290.ge988e9ce2a




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux