On Thu, Apr 5, 2018 at 2:33 PM, Eric Sunshine <sunshine@xxxxxxxxxxxxxx> wrote: > On Wed, Apr 4, 2018 at 1:06 PM, Wink Saville <wink@xxxxxxxxxxx> wrote: >> I built git on a mac osx laptop and got some errors when testing. >> I ran ./ci/run-build-and-tests.sh and three of the tests had failures >> that appear to be associated with character encoding: >> ... >> Of course on travis-ci there are no failures so I dug deeper and found >> that travis-ci is running 10.12.6 (I added a call to system_profier in >> ci/run-build-and-tests.sh) where as I'm running is 10.13.4: >> >> Not sure, but maybe I've got something configured incorrectly. >> Suggestions anyone? > > I'm still on 10.12.6 and I don't plan on upgrading, so you may need to > dig into this yourself. > > Try narrowing down the problem to the exact command within the test > which is failing or giving unexpected results. From there, it may be > possible to identify some difference between 10.12.6 and 10.13.4 or > between something in your current configuration and that on Travis or > elsewhere. OK
