On Wed, Mar 28, 2018 at 03:20:51PM -0700, Erik E Brady wrote:
> Subject: Re: [PATCH] credential: cred helper fast exit can cause SIGPIPE, crash
Thanks for sending this. The patch itself looks good to me, but I have a
few nits with your commit message.
We usually write commit messages in the imperative, with the subject
summarizing the change. So:
Subject: credential: ignore SIGPIPE when writing to credential helpers
or similar.
> credential.c, run_credential_helper(): now ignores SIGPIPE
> when writing to credential helper. Avoids problem with race
> where cred helper exits very quickly and, after, git tries
> to write to it, generating SIGPIPE and crashing git. To
> reproduce this the cred helper must not read from STDIN.
We can stop being terse outside of the subject line. :) I'd probably
write something like:
The credential subsystem can trigger SIGPIPE when writing to an
external helper if that helper closes its stdin before reading the
whole input. Normally this is rare, since helpers would need to read
that input to make a decision about how to respond, but:
1. It's reasonable to configure a helper which blindly a "get"
answer, and trigger it only for certain hosts via config like:
[credential "https://example.com";]
helper = "!get-example-password"
2. A broken or misbehaving helper might exit immediately. That's an
error, but it's not reasonable for it to take down the parent Git
process with SIGPIPE.
Even with such a helper, seeing this problem should be rare. Getting
SIGPIPE requires the helper racily exiting before we've written the
fairly small credential output.
Feel free to steal or adapt any of that as you see fit.
> This was seen with a custom credential helper, written in
> Go, which ignored the store command (STDIN not read) and
> then did a quick exit. Even with this fast helper the race
> was pretty rare, ie: was only seen on some of our older VM's
> running 2.6.18-416.el5 #1 SMP linux for whatever reason. On
> these VM's it occurred only once every few hundred git cmds.
> ---
Missing signoff. See Documentation/SubmittingPatches, especially the
'sign-off' and 'dco' sections.
> credential.c | 3 +++
> 1 file changed, 3 insertions(+)
No test, but I think that's fine here. Any such test would be inherently
racy.
> @@ -227,8 +228,10 @@ static int run_credential_helper(struct credential *c,
> return -1;
>
> fp = xfdopen(helper.in, "w");
> + sigchain_push(SIGPIPE, SIG_IGN);
> credential_write(c, fp);
> fclose(fp);
> + sigchain_pop(SIGPIPE);
This looks like the right place to put the push/pop (as you noted
before, we may not write until fclose flushes, so it definitely has to
go after that).
Thanks again for digging this up. It's pretty subtle. :)
-Peff
