Thank you Eric, for the review. This is follow on patch[1]. The changes in patch increased from v1 to v2 because I got excited to work in Git codebase and I tried to fix the exisiting problems as much as possible. Hence, the large number of changes. >> test_cmp expect.two output.two >> @@ -120,18 +122,20 @@ test_expect_success 'test another branch' ' >> git config --add svn-remote.four.url "$svnrepo" && >> git config --add svn-remote.four.fetch trunk:refs/remotes/four/trunk && >> git config --add svn-remote.four.branches \ >> - "branches/*/*:refs/remotes/four/branches/*/*" && >> + "branches/*/*:refs/remotes/four/branches/*/*" && >> git config --add svn-remote.four.tags \ >> - "tags/*:refs/remotes/four/tags/*" && >> + "tags/*:refs/remotes/four/tags/*" && >I guess you sneaked in a whitespace change here which is unrelated to >the stated purpose of this patch, thus acted as a speed bump during >review. If this was the only instance in this test script of >whitespace needing correction, then it _might_ be okay to include it >in this patch, however, that's not the case. There are many other such >instance in this test script which could be corrected, so it doesn't >make sense to single out these two and ignore all the others. >Therefore, you should omit this change. I used tabify in Emacs and it must have messed up the whitespace change. I read SubmittingPatches guideline[2] for git where it is said that whitespace check must be done and git community is picky about it and 'git diff --check' must be done before commit. If I change this change back to original the 'git diff --check' reports whitespace identation with space. So, isn't this supposedly a fix? [1]: https://public-inbox.org/git/20180319173204.31952-1-predatoramigo@xxxxxxxxx/ [2]: https://github.com/git/git/blob/master/Documentation/SubmittingPatches ------------------------------------- >8---------------------------------------- Avoid using pipes downstream of Git commands since the exit codes of commands upstream of pipes get swallowed, thus potentially hiding failure of those commands. Instead, capture Git command output to a file and apply the downstream command(s) to that file. Signed-off-by: Pratik Karki <predatoramigo@xxxxxxxxx> --- t/t5300-pack-object.sh | 10 +++--- t/t5510-fetch.sh | 8 ++--- t/t7001-mv.sh | 22 ++++++------ t/t7003-filter-branch.sh | 9 +++-- t/t9104-git-svn-follow-parent.sh | 16 +++++---- t/t9108-git-svn-glob.sh | 14 ++++---- t/t9109-git-svn-multi-glob.sh | 38 +++++++++++---------- t/t9110-git-svn-use-svm-props.sh | 42 +++++++++++------------ t/t9111-git-svn-use-svnsync-props.sh | 36 ++++++++++---------- t/t9114-git-svn-dcommit-merge.sh | 10 +++--- t/t9130-git-svn-authors-file.sh | 28 +++++++++------- t/t9138-git-svn-authors-prog.sh | 31 ++++++++--------- t/t9153-git-svn-rewrite-uuid.sh | 8 ++--- t/t9168-git-svn-partially-globbed-names.sh | 34 +++++++++++-------- t/t9350-fast-export.sh | 54 ++++++++++++++++-------------- 15 files changed, 193 insertions(+), 167 deletions(-) diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 9c68b9925..707208284 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -311,9 +311,9 @@ test_expect_success 'unpacking with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && - PACK6=$( ( + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && + PACK6=$(( echo "$LIST" echo "$LI" echo "$ST" @@ -358,8 +358,8 @@ test_expect_success 'index-pack with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && PACK6=$( ( echo "$LIST" echo "$LI" diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 668c54be4..c7b284138 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -693,8 +693,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch aligned output' ' test_commit looooooooooooong-tag && ( cd full-output && - git -c fetch.output=full fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=full fetch origin >actual2 2>&1 && + grep -e "->" actual2 | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/master @@ -708,8 +708,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' test_commit extraaa && ( cd compact && - git -c fetch.output=compact fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=compact fetch origin >actual2 2>&1 && + grep -e "->" actual2 | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/* diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index 6e5031f56..00aa9e45b 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -21,8 +21,8 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path1/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path1/COPYING" actual' test_expect_success \ 'moving the file back into subdirectory' \ @@ -35,8 +35,8 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path1/COPYING..*path0/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path1/COPYING..*path0/COPYING" actual' test_expect_success \ 'checking -k on non-existing file' \ @@ -116,10 +116,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/README..*path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path2/COPYING" actual && + grep "^R100..*path0/README..*path2/README" actual' test_expect_success \ 'succeed when source is a prefix of destination' \ @@ -135,10 +134,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/COPYING..*path1/path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/README..*path1/path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path2/COPYING..*path1/path2/COPYING" actual && + grep "^R100..*path2/README..*path1/path2/README" actual' test_expect_success \ 'do not move directory over existing directory' \ diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 7cb60799b..6a28b6cce 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -187,7 +187,8 @@ test_expect_success 'author information is preserved' ' test \$GIT_COMMIT != $(git rev-parse master) || \ echo Hallo" \ preserved-author) && - test 1 = $(git rev-list --author="B V Uips" preserved-author | wc -l) + git rev-list --author="B V Uips" preserved-author >actual && + test_line_count = 1 actual ' test_expect_success "remove a certain author's commits" ' @@ -205,7 +206,8 @@ test_expect_success "remove a certain author's commits" ' cnt1=$(git rev-list master | wc -l) && cnt2=$(git rev-list removed-author | wc -l) && test $cnt1 -eq $(($cnt2 + 1)) && - test 0 = $(git rev-list --author="B V Uips" removed-author | wc -l) + git rev-list --author="B V Uips" removed-author >actual && + test_line_count = 0 actual ' test_expect_success 'barf on invalid name' ' @@ -258,7 +260,8 @@ test_expect_success 'Subdirectory filter with disappearing trees' ' git commit -m "Re-adding foo" && git filter-branch -f --subdirectory-filter foo && - test $(git rev-list master | wc -l) = 3 + git rev-list master >actual && + test_line_count = 3 actual ' test_expect_success 'Tag name filtering retains tag message' ' diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index cd480edf1..a735fa371 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -33,8 +33,8 @@ test_expect_success 'init and fetch a moved directory' ' git svn fetch -i thunk && test "$(git rev-parse --verify refs/remotes/thunk@2)" \ = "$(git rev-parse --verify refs/remotes/thunk~1)" && - test "$(git cat-file blob refs/remotes/thunk:readme |\ - sed -n -e "3p")" = goodbye && + git cat-file blob refs/remotes/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye && test -z "$(git config --get svn-remote.svn.fetch \ "^trunk:refs/remotes/thunk@2$")" ' @@ -48,8 +48,8 @@ test_expect_success 'init and fetch from one svn-remote' ' git svn fetch -i svn/thunk && test "$(git rev-parse --verify refs/remotes/svn/trunk)" \ = "$(git rev-parse --verify refs/remotes/svn/thunk~1)" && - test "$(git cat-file blob refs/remotes/svn/thunk:readme |\ - sed -n -e "3p")" = goodbye + git cat-file blob refs/remotes/svn/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye ' test_expect_success 'follow deleted parent' ' @@ -107,7 +107,8 @@ test_expect_success 'follow deleted directory' ' git svn init --minimize-url -i glob "$svnrepo"/glob && git svn fetch -i glob && test "$(git cat-file blob refs/remotes/glob:blob/bye)" = hi && - test "$(git ls-tree refs/remotes/glob | wc -l )" -eq 1 + git ls-tree refs/remotes/glob >actual && + test_line_count = 1 actual ' # ref: r9270 of the Subversion repository: (http://svn.collab.net/repos/svn) @@ -204,8 +205,9 @@ test_expect_success "follow-parent is atomic" ' test_expect_success "track multi-parent paths" ' svn_cmd cp -m "resurrect /glob" "$svnrepo"/r9270 "$svnrepo"/glob && git svn multi-fetch && - test $(git cat-file commit refs/remotes/glob | \ - grep "^parent " | wc -l) -eq 2 + git cat-file commit refs/remotes/glob >actual && + grep "^parent " actual >actual2 && + test_line_count = 2 actual2 ' test_expect_success "multi-fetch continues to work" " diff --git a/t/t9108-git-svn-glob.sh b/t/t9108-git-svn-glob.sh index a94286c8e..6990f6436 100755 --- a/t/t9108-git-svn-glob.sh +++ b/t/t9108-git-svn-glob.sh @@ -47,8 +47,8 @@ test_expect_success 'test refspec globbing' ' git config --add svn-remote.svn.tags\ "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/start)" && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' diff --git a/t/t9109-git-svn-multi-glob.sh b/t/t9109-git-svn-multi-glob.sh index 8d99e848d..5abffe1a4 100755 --- a/t/t9109-git-svn-multi-glob.sh +++ b/t/t9109-git-svn-multi-glob.sh @@ -41,14 +41,14 @@ test_expect_success 'test refspec globbing' ' ) && git config --add svn-remote.svn.url "$svnrepo" && git config --add svn-remote.svn.fetch \ - "trunk/src/a:refs/remotes/trunk" && + "trunk/src/a:refs/remotes/trunk" && git config --add svn-remote.svn.branches \ - "branches/*/*/src/a:refs/remotes/branches/*/*" && + "branches/*/*/src/a:refs/remotes/branches/*/*" && git config --add svn-remote.svn.tags\ - "tags/*/src/a:refs/remotes/tags/*" && + "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/v1/start)" && @@ -65,9 +65,9 @@ test_expect_success 'test left-hand-side only globbing' ' git config --add svn-remote.two.url "$svnrepo" && git config --add svn-remote.two.fetch trunk:refs/remotes/two/trunk && git config --add svn-remote.two.branches \ - "branches/*/*:refs/remotes/two/branches/*/*" && + "branches/*/*:refs/remotes/two/branches/*/*" && git config --add svn-remote.two.tags \ - "tags/*:refs/remotes/two/tags/*" && + "tags/*:refs/remotes/two/tags/*" && ( cd tmp && echo "try try" >> tags/end/src/b/readme && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/v1/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/v1/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/v1/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/v1/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' cat > expect.four <<EOF @@ -120,18 +122,20 @@ test_expect_success 'test another branch' ' git config --add svn-remote.four.url "$svnrepo" && git config --add svn-remote.four.fetch trunk:refs/remotes/four/trunk && git config --add svn-remote.four.branches \ - "branches/*/*:refs/remotes/four/branches/*/*" && + "branches/*/*:refs/remotes/four/branches/*/*" && git config --add svn-remote.four.tags \ - "tags/*:refs/remotes/four/tags/*" && + "tags/*:refs/remotes/four/tags/*" && git svn fetch four && - test $(git rev-list refs/remotes/four/tags/next | wc -l) -eq 5 && - test $(git rev-list refs/remotes/four/branches/v2/start | wc -l) -eq 3 && + git rev-list refs/remotes/four/tags/next >actual && + test_line_count = 5 actual && + git rev-list refs/remotes/four/branches/v2/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/four/branches/v2/start~2) = \ $(git rev-parse refs/remotes/four/trunk) && test $(git rev-parse refs/remotes/four/tags/next~2) = \ $(git rev-parse refs/remotes/four/branches/v2/start) && - git log --pretty=oneline refs/remotes/four/tags/next | \ - sed -e "s/^.\{41\}//" > output.four && + git log --pretty=oneline refs/remotes/four/tags/next >actual && + sed -e "s/^.\{41\}//" actual >output.four && test_cmp expect.four output.four ' diff --git a/t/t9110-git-svn-use-svm-props.sh b/t/t9110-git-svn-use-svm-props.sh index dde0a3c22..dbd9590a7 100755 --- a/t/t9110-git-svn-use-svm-props.sh +++ b/t/t9110-git-svn-use-svm-props.sh @@ -21,38 +21,38 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual && + grep '^git-svn-id: $bar_url@11 $uuid$' actual && + git cat-file commit refs/remotes/bar~2 >actual && + grep '^git-svn-id: $bar_url@10 $uuid$' actual && + git cat-file commit refs/remotes/bar~3 >actual && + grep '^git-svn-id: $bar_url@9 $uuid$' actual && + git cat-file commit refs/remotes/bar~4 >actual && + grep '^git-svn-id: $bar_url@6 $uuid$' actual && + git cat-file commit refs/remotes/bar~5 >actual && + grep '^git-svn-id: $bar_url@1 $uuid$' actual " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual && + grep '^git-svn-id: $dir_url@1 $uuid$' actual " test_expect_success 'find commit based on SVN revision number' " - git svn find-rev r12 | - grep $(git rev-parse HEAD) - " + git svn find-rev r12 >actual && + grep $(git rev-parse HEAD) actual + " test_expect_success 'empty rebase' " git svn rebase diff --git a/t/t9111-git-svn-use-svnsync-props.sh b/t/t9111-git-svn-use-svnsync-props.sh index 22b6e5ee7..a4225c9f6 100755 --- a/t/t9111-git-svn-use-svnsync-props.sh +++ b/t/t9111-git-svn-use-svnsync-props.sh @@ -20,32 +20,32 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual1 && + grep '^git-svn-id: $bar_url@11 $uuid$' actual1 && + git cat-file commit refs/remotes/bar~2 >actual2 && + grep '^git-svn-id: $bar_url@10 $uuid$' actual2 && + git cat-file commit refs/remotes/bar~3 >actual3 && + grep '^git-svn-id: $bar_url@9 $uuid$' actual3 && + git cat-file commit refs/remotes/bar~4 >actual4 && + grep '^git-svn-id: $bar_url@6 $uuid$' actual4 && + git cat-file commit refs/remotes/bar~5 >actual5 && + grep '^git-svn-id: $bar_url@1 $uuid$' actual5 " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual1 && + grep '^git-svn-id: $dir_url@1 $uuid$' actual1 " test_done diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index 50bca62de..32317d6bc 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -68,7 +68,8 @@ test_debug 'gitk --all & sleep 1' test_expect_success 'verify pre-merge ancestry' " test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'git svn dcommit merges' " @@ -82,12 +83,13 @@ test_expect_success 'verify post-merge ancestry' " x\$(git rev-parse --verify refs/remotes/origin/trunk) && test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'verify merge commit message' " - git rev-list --pretty=raw -1 refs/heads/svn | \ - grep \" Merge branch 'merge' into svn\" + git rev-list --pretty=raw -1 refs/heads/svn >actual && + grep \" Merge branch 'merge' into svn\" actual " test_done diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index 41264818c..7752a1fae 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -26,11 +26,12 @@ test_expect_success 'start import with incomplete authors file' ' test_expect_success 'imported 2 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 2 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author BBBBBBB BBBBBBB <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author AAAAAAA AAAAAAA <aa@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 2 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author BBBBBBB BBBBBBB <bb@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author AAAAAAA AAAAAAA <aa@example\.com> " actual ) ' @@ -43,11 +44,12 @@ test_expect_success 'continues to import once authors have been added' ' ( cd x git svn fetch --authors-file=../svn-authors && - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 4 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author DDDDDDD DDDDDDD <dd@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author CCCCCCC CCCCCCC <cc@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 4 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author DDDDDDD DDDDDDD <dd@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author CCCCCCC CCCCCCC <cc@example\.com> " actual ) ' @@ -102,8 +104,10 @@ test_expect_success !MINGW 'fresh clone with svn.authors-file in config' ' test x"$HOME"/svn-authors = x"$(git config svn.authorsfile)" && git svn clone "$svnrepo" gitconfig.clone && cd gitconfig.clone && - nr_ex=$(git log | grep "^Author:.*example.com" | wc -l) && - nr_rev=$(git rev-list HEAD | wc -l) && + git log >actual && + nr_ex=$(grep "^Author:.*example.com" actual | wc -l) && + git rev-list HEAD >actual && + nr_rev=$(wc -l <actual) && test $nr_rev -eq $nr_ex ) ' diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 7d7e9d46b..f684f5578 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -37,31 +37,32 @@ test_expect_success 'import authors with prog and file' ' test_expect_success 'imported 6 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 6 + git rev-list refs/remotes/git-svn >actual && + test_line_count = 6 actual ) ' test_expect_success 'authors-prog ran correctly' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author ee-foo <ee-foo@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~2 | \ - grep "^author dd <dd@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~3 | \ - grep "^author cc <cc@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~4 | \ - grep "^author bb <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ - grep "^author aa <aa@example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author ee-foo <ee-foo@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~2 >actual2 && + grep "^author dd <dd@sub\.example\.com> " actual2 && + git rev-list -1 --pretty=raw refs/remotes/git-svn~3 >actual3 && + grep "^author cc <cc@sub\.example\.com> " actual3 && + git rev-list -1 --pretty=raw refs/remotes/git-svn~4 >actual4 && + grep "^author bb <bb@example\.com> " actual4 && + git rev-list -1 --pretty=raw refs/remotes/git-svn~5 >actual5 && + grep "^author aa <aa@example\.com> " actual5 ) ' test_expect_success 'authors-file overrode authors-prog' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " actual ) ' @@ -73,8 +74,8 @@ test_expect_success 'authors-prog handled special characters in username' ' ( cd x && git svn --authors-prog=../svn-authors-prog fetch && - git rev-list -1 --pretty=raw refs/remotes/git-svn | - grep "^author xyz; touch evil <xyz; touch evil@example\.com> " && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author xyz; touch evil <xyz; touch evil@example\.com> " actual && ! test -f evil ) ' diff --git a/t/t9153-git-svn-rewrite-uuid.sh b/t/t9153-git-svn-rewrite-uuid.sh index 372ef1568..6cd28bb9a 100755 --- a/t/t9153-git-svn-rewrite-uuid.sh +++ b/t/t9153-git-svn-rewrite-uuid.sh @@ -16,10 +16,10 @@ test_expect_success 'load svn repo' " " test_expect_success 'verify uuid' " - git cat-file commit refs/remotes/git-svn~0 | \ - grep '^git-svn-id: .*@2 $uuid$' && - git cat-file commit refs/remotes/git-svn~1 | \ - grep '^git-svn-id: .*@1 $uuid$' + git cat-file commit refs/remotes/git-svn~0 >actual && + grep '^git-svn-id: .*@2 $uuid$' actual && + git cat-file commit refs/remotes/git-svn~1 >actual1 && + grep '^git-svn-id: .*@1 $uuid$' actual1 " test_done diff --git a/t/t9168-git-svn-partially-globbed-names.sh b/t/t9168-git-svn-partially-globbed-names.sh index 8b22f2272..df6f3a974 100755 --- a/t/t9168-git-svn-partially-globbed-names.sh +++ b/t/t9168-git-svn-partially-globbed-names.sh @@ -48,8 +48,8 @@ test_expect_success 'test refspec prefixed globbing' ' git config --add svn-remote.svn.tags\ "tags/t_*/src/a:refs/remotes/tags/t_*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.end && + git log --pretty=oneline refs/remotes/tags/t_end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/t_end~1)" = \ "$(git rev-parse refs/remotes/branches/b_start)" && @@ -78,14 +78,16 @@ test_expect_success 'test left-hand-side only prefixed globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/t_end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/b_start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/t_end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/b_start >actual2 && + test_line_count = 3 actual2 && test $(git rev-parse refs/remotes/two/branches/b_start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/t_end~3) = \ $(git rev-parse refs/remotes/two/branches/b_start) && - git log --pretty=oneline refs/remotes/two/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.two && + git log --pretty=oneline refs/remotes/two/tags/t_end >actual3 && + sed -e "s/^.\{41\}//" actual3 >output.two && test_cmp expect.two output.two ' @@ -118,14 +120,16 @@ test_expect_success 'test prefixed globs match just prefix' ' svn_cmd up ) && git svn fetch three && - test $(git rev-list refs/remotes/three/branches/b_ | wc -l) -eq 2 && - test $(git rev-list refs/remotes/three/tags/t_ | wc -l) -eq 3 && + git rev-list refs/remotes/three/branches/b_ >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/three/tags/t_ >actual2 && + test_line_count = 3 actual2 && test $(git rev-parse refs/remotes/three/branches/b_~1) = \ $(git rev-parse refs/remotes/three/trunk) && test $(git rev-parse refs/remotes/three/tags/t_~1) = \ $(git rev-parse refs/remotes/three/branches/b_) && - git log --pretty=oneline refs/remotes/three/tags/t_ | \ - sed -e "s/^.\{41\}//" >output.three && + git log --pretty=oneline refs/remotes/three/tags/t_ >actual3 && + sed -e "s/^.\{41\}//" actual3 >output.three && test_cmp expect.three output.three ' @@ -186,14 +190,16 @@ test_expect_success 'test globbing in the middle of the word' ' svn_cmd up ) && git svn fetch five && - test $(git rev-list refs/remotes/five/branches/abcde | wc -l) -eq 2 && - test $(git rev-list refs/remotes/five/tags/fghij | wc -l) -eq 3 && + git rev-list refs/remotes/five/branches/abcde >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/five/tags/fghij >actual2 && + test_line_count = 3 actual2 && test $(git rev-parse refs/remotes/five/branches/abcde~1) = \ $(git rev-parse refs/remotes/five/trunk) && test $(git rev-parse refs/remotes/five/tags/fghij~1) = \ $(git rev-parse refs/remotes/five/branches/abcde) && - git log --pretty=oneline refs/remotes/five/tags/fghij | \ - sed -e "s/^.\{41\}//" >output.five && + git log --pretty=oneline refs/remotes/five/tags/fghij >actual3 && + sed -e "s/^.\{41\}//" actual3 >output.five && test_cmp expect.five output.five ' diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 866ddf605..116b4e5f8 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -43,20 +43,20 @@ test_expect_success 'fast-export | fast-import' ' MUSS=$(git rev-parse --verify muss) && mkdir new && git --git-dir=new/.git init && - git fast-export --all | + git fast-export --all >actual && (cd new && git fast-import && test $MASTER = $(git rev-parse --verify refs/heads/master) && test $REIN = $(git rev-parse --verify refs/tags/rein) && test $WER = $(git rev-parse --verify refs/heads/wer) && - test $MUSS = $(git rev-parse --verify refs/tags/muss)) + test $MUSS = $(git rev-parse --verify refs/tags/muss)) <actual ' test_expect_success 'fast-export master~2..master' ' - git fast-export master~2..master | - sed "s/master/partial/" | + git fast-export master~2..master >actual && + sed "s/master/partial/" actual | (cd new && git fast-import && test $MASTER != $(git rev-parse --verify refs/heads/partial) && @@ -74,11 +74,12 @@ test_expect_success 'iso-8859-1' ' test_tick && echo rosten >file && git commit -s -m den file && - git fast-export wer^..wer | - sed "s/wer/i18n/" | - (cd new && - git fast-import && - git cat-file commit i18n | grep "Áéí óú") + git fast-export wer^..wer >actual && + sed "s/wer/i18n/" actual | + (cd new && + git fast-import && + git cat-file commit i18n >actual && + grep "Áéí óú" actual) ' test_expect_success 'import/export-marks' ' @@ -87,18 +88,18 @@ test_expect_success 'import/export-marks' ' git fast-export --export-marks=tmp-marks HEAD && test -s tmp-marks && test_line_count = 3 tmp-marks && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual && test $( - git fast-export --import-marks=tmp-marks\ - --export-marks=tmp-marks HEAD | - grep ^commit | + grep ^commit actual | wc -l) \ -eq 0 && echo change > file && git commit -m "last commit" file && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual2 && test $( - git fast-export --import-marks=tmp-marks \ - --export-marks=tmp-marks HEAD | - grep ^commit\ | + grep ^commit\ actual2 | wc -l) \ -eq 1 && test_line_count = 4 tmp-marks @@ -184,7 +185,7 @@ test_expect_success 'submodule fast-export | fast-import' ' rm -rf new && mkdir new && git --git-dir=new/.git init && - git fast-export --signed-tags=strip --all | + git fast-export --signed-tags=strip --all >actual && (cd new && git fast-import && test "$SUBENT1" = "$(git ls-tree refs/heads/master^ sub)" && @@ -192,7 +193,7 @@ test_expect_success 'submodule fast-export | fast-import' ' git checkout master && git submodule init && git submodule update && - cmp sub/file ../sub/file) + cmp sub/file ../sub/file) <actual ' @@ -361,18 +362,20 @@ test_expect_failure 'no exact-ref revisions included' ' ) ' -test_expect_success 'path limiting with import-marks does not lose unmodified files' ' +test_expect_success 'path limiting with import-marks does not lose unmodified files' ' git checkout -b simple marks~2 && git fast-export --export-marks=marks simple -- file > /dev/null && echo more content >> file && test_tick && git commit -mnext file && - git fast-export --import-marks=marks simple -- file file0 | grep file0 + git fast-export --import-marks=marks simple -- file file0 >actual && + grep file0 actual ' -test_expect_success 'full-tree re-shows unmodified files' ' +test_expect_success 'full-tree re-shows unmodified files' ' git checkout -f simple && - test $(git fast-export --full-tree simple | grep -c file0) -eq 3 + git fast-export --full-tree simple >actual && + test $(grep -c file0 actual) -eq 3 ' test_expect_success 'set-up a few more tags for tag export tests' ' @@ -500,13 +503,13 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' git fast-export --import-marks=tmp-marks \ --export-marks=tmp-marks master > /dev/null && git fast-export --import-marks=tmp-marks \ - --export-marks=tmp-marks master > actual && + --export-marks=tmp-marks master >actual && test_cmp expected actual ' test_expect_success 'use refspec' ' - git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ - grep "^commit " | sort | uniq > actual && + git fast-export --refspec refs/heads/master:refs/heads/foobar master >actual2 && + grep "^commit " actual2 | sort | uniq >actual && echo "commit refs/heads/foobar" > expected && test_cmp expected actual ' @@ -534,7 +537,8 @@ test_expect_success 'when using -C, do not declare copy when source of copy is a git -C src commit -m 2nd_commit && test_create_repo dst && - git -C src fast-export --all -C | git -C dst fast-import && + git -C src fast-export --all -C >actual && + git -C dst fast-import <actual && git -C src show >expected && git -C dst show >actual && test_cmp expected actual -- 2.16.2
