From: Jeff Hostetler <jeffhost@xxxxxxxxxxxxx>
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result. This feature is
intended to help with partial clone.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Normally, rev-list will stop with an error when there are
missing objects.
When the "--filter-print-missing" option is used, rev-list
will print a list of any missing objects that should have
been included in the output (rather than stopping).
These are marked with a "?".
When the "--filter-ignore-missing" option is used, rev-list
will silently ignore any missing objects and continue without
error.
Add t6112 test.
Signed-off-by: Jeff Hostetler <jeffhost@xxxxxxxxxxxxx>
---
Documentation/git-rev-list.txt | 6 +-
Documentation/rev-list-options.txt | 34 ++++++
builtin/rev-list.c | 75 +++++++++++-
t/t6112-rev-list-filters-objects.sh | 225 ++++++++++++++++++++++++++++++++++++
4 files changed, 337 insertions(+), 3 deletions(-)
create mode 100755 t/t6112-rev-list-filters-objects.sh
diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt
index ef22f17..b8a3a5b 100644
--- a/Documentation/git-rev-list.txt
+++ b/Documentation/git-rev-list.txt
@@ -47,7 +47,11 @@ SYNOPSIS
[ --fixed-strings | -F ]
[ --date=<format>]
[ [ --objects | --objects-edge | --objects-edge-aggressive ]
- [ --unpacked ] ]
+ [ --unpacked ]
+ [ --filter=<filter-spec> ] ]
+ [ --filter-print-missing ]
+ [ --filter-print-omitted ]
+ [ --filter-ignore-missing ]
[ --pretty | --header ]
[ --bisect ]
[ --bisect-vars ]
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
index 13501e1..9233134 100644
--- a/Documentation/rev-list-options.txt
+++ b/Documentation/rev-list-options.txt
@@ -706,6 +706,40 @@ ifdef::git-rev-list[]
--unpacked::
Only useful with `--objects`; print the object IDs that are not
in packs.
+
+--filter=<filter-spec>::
+ Only useful with one of the `--objects*`; omits objects (usually
+ blobs) from the list of printed objects. The '<filter-spec>'
+ may be one of the following:
++
+The form '--filter=blob:none' omits all blobs.
++
+The form '--filter=blob:limit=<n>[kmg]' omits blobs larger than n bytes
+or units. The value may be zero. Special files matching '.git*' are
+alwayse included, regardless of size.
++
+The form '--filter=sparse:oid=<oid-ish>' uses a sparse-checkout
+specification contained in the object (or the object that the expression
+evaluates to) to omit blobs not required by the corresponding sparse
+checkout.
++
+The form '--filter=sparse:path=<path>' similarly uses a sparse-checkout
+specification contained in <path>.
+
+--filter-print-missing::
+ Prints a list of the missing objects for the requested traversal.
+ Object IDs are prefixed with a ``?'' character. The object type
+ is printed after the ID. This may be used with or without any of
+ the above filtering options.
+
+--filter-ignore-missing::
+ Ignores missing objects encountered during the requested traversal.
+ This may be used with or without any of the above filtering options.
+
+--filter-print-omitted::
+ Only useful with one of the above `--filter*`; prints a list
+ of the omitted objects. Object IDs are prefixed with a ``~''
+ character.
endif::git-rev-list[]
--no-walk[=(sorted|unsorted)]::
diff --git a/builtin/rev-list.c b/builtin/rev-list.c
index c1c74d4..cc9fa40 100644
--- a/builtin/rev-list.c
+++ b/builtin/rev-list.c
@@ -4,6 +4,8 @@
#include "diff.h"
#include "revision.h"
#include "list-objects.h"
+#include "list-objects-filter.h"
+#include "list-objects-filter-options.h"
#include "pack.h"
#include "pack-bitmap.h"
#include "builtin.h"
@@ -12,6 +14,7 @@
#include "bisect.h"
#include "progress.h"
#include "reflog-walk.h"
+#include "oidset.h"
static const char rev_list_usage[] =
"git rev-list [OPTION] <commit-id>... [ -- paths... ]\n"
@@ -54,6 +57,15 @@ static const char rev_list_usage[] =
static struct progress *progress;
static unsigned progress_counter;
+static struct list_objects_filter_options filter_options;
+static struct oidset missing_objects;
+static struct oidset omitted_objects;
+static int arg_print_missing;
+static int arg_print_omitted;
+static int arg_ignore_missing;
+
+#define DEFAULT_OIDSET_SIZE (16*1024)
+
static void finish_commit(struct commit *commit, void *data);
static void show_commit(struct commit *commit, void *data)
@@ -181,8 +193,16 @@ static void finish_commit(struct commit *commit, void *data)
static void finish_object(struct object *obj, const char *name, void *cb_data)
{
struct rev_list_info *info = cb_data;
- if (obj->type == OBJ_BLOB && !has_object_file(&obj->oid))
+ if (obj->type == OBJ_BLOB && !has_object_file(&obj->oid)) {
+ if (arg_print_missing) {
+ oidset_insert(&missing_objects, &obj->oid);
+ return;
+ }
+ if (arg_ignore_missing)
+ return;
+
die("missing blob object '%s'", oid_to_hex(&obj->oid));
+ }
if (info->revs->verify_objects && !obj->parsed && obj->type != OBJ_COMMIT)
parse_object(&obj->oid);
}
@@ -335,6 +355,30 @@ int cmd_rev_list(int argc, const char **argv, const char *prefix)
show_progress = arg;
continue;
}
+
+ if (skip_prefix(arg, ("--" CL_ARG__FILTER "="), &arg)) {
+ parse_list_objects_filter(&filter_options, arg);
+ if (filter_options.choice && !revs.blob_objects)
+ die(_("object filtering requires --objects"));
+ if (filter_options.choice == LOFC_SPARSE_OID &&
+ !filter_options.sparse_oid_value)
+ die(_("invalid sparse value '%s'"),
+ filter_options.raw_value);
+ continue;
+ }
+ if (!strcmp(arg, "--filter-print-missing")) {
+ arg_print_missing = 1;
+ continue;
+ }
+ if (!strcmp(arg, "--filter-print-omitted")) {
+ arg_print_omitted = 1;
+ continue;
+ }
+ if (!strcmp(arg, "--filter-ignore-missing")) {
+ arg_ignore_missing = 1;
+ continue;
+ }
+
usage(rev_list_usage);
}
@@ -360,6 +404,9 @@ int cmd_rev_list(int argc, const char **argv, const char *prefix)
if (revs.show_notes)
die(_("rev-list does not support display of notes"));
+ if (filter_options.choice && use_bitmap_index)
+ die(_("cannot combine --use-bitmap-index with object filtering"));
+
save_commit_buffer = (revs.verbose_header ||
revs.grep_filter.pattern_list ||
revs.grep_filter.header_list);
@@ -404,7 +451,31 @@ int cmd_rev_list(int argc, const char **argv, const char *prefix)
return show_bisect_vars(&info, reaches, all);
}
- traverse_commit_list(&revs, show_commit, show_object, &info);
+ if (arg_print_missing)
+ oidset_init(&missing_objects, DEFAULT_OIDSET_SIZE);
+ if (arg_print_omitted)
+ oidset_init(&omitted_objects, DEFAULT_OIDSET_SIZE);
+
+ traverse_commit_list_filtered(
+ &filter_options, &revs, show_commit, show_object, &info,
+ (arg_print_omitted ? &omitted_objects : NULL));
+
+ if (arg_print_omitted) {
+ struct oidset_iter iter;
+ struct object_id *oid;
+ oidset_iter_init(&omitted_objects, &iter);
+ while ((oid = oidset_iter_next(&iter)))
+ printf("~%s\n", oid_to_hex(oid));
+ oidset_clear(&omitted_objects);
+ }
+ if (arg_print_missing) {
+ struct oidset_iter iter;
+ struct object_id *oid;
+ oidset_iter_init(&missing_objects, &iter);
+ while ((oid = oidset_iter_next(&iter)))
+ printf("?%s\n", oid_to_hex(oid));
+ oidset_clear(&missing_objects);
+ }
stop_progress(&progress);
diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh
new file mode 100755
index 0000000..9327974
--- /dev/null
+++ b/t/t6112-rev-list-filters-objects.sh
@@ -0,0 +1,225 @@
+#!/bin/sh
+
+test_description='git rev-list with object filtering for partial clone'
+
+. ./test-lib.sh
+
+# Test the blob:none filter.
+
+test_expect_success 'setup r1' '
+ echo "{print \$1}" >print_1.awk &&
+ echo "{print \$2}" >print_2.awk &&
+
+ git init r1 &&
+ for n in 1 2 3 4 5
+ do
+ echo "This is file: $n" > r1/file.$n
+ git -C r1 add file.$n
+ git -C r1 commit -m "$n"
+ done
+'
+
+test_expect_success 'verify blob:none omits all 5 blobs' '
+ git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r1 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:none \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify emitted+omitted == all' '
+ git -C r1 rev-list HEAD --objects \
+ | awk -f print_1.awk \
+ | sort >expected &&
+ git -C r1 rev-list HEAD --objects --filter-print-omitted --filter=blob:none \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+
+# Test blob:limit=<n>[kmg] filter.
+# We boundary test around the size parameter. The filter is strictly less than
+# the value, so size 500 and 1000 should have the same results, but 1001 should
+# filter more.
+
+test_expect_success 'setup r2' '
+ git init r2 &&
+ for n in 1000 10000
+ do
+ printf "%"$n"s" X > r2/large.$n
+ git -C r2 add large.$n
+ git -C r2 commit -m "$n"
+ done
+'
+
+test_expect_success 'verify blob:limit=500 omits all blobs' '
+ git -C r2 ls-files -s large.1000 large.10000 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=500 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify emitted+omitted == all' '
+ git -C r2 rev-list HEAD --objects \
+ | awk -f print_1.awk \
+ | sort >expected &&
+ git -C r2 rev-list HEAD --objects --filter-print-omitted --filter=blob:limit=500 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify blob:limit=1000' '
+ git -C r2 ls-files -s large.1000 large.10000 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1000 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify blob:limit=1001' '
+ git -C r2 ls-files -s large.10000 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1001 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify blob:limit=1k' '
+ git -C r2 ls-files -s large.10000 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1k \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify blob:limit=1m' '
+ cat </dev/null >expected &&
+ git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1m \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+# Test sparse:path=<path> filter.
+# Use a local file containing a sparse-checkout specification to filter
+# out blobs not required for the corresponding sparse-checkout. We do not
+# require sparse-checkout to actually be enabled.
+
+test_expect_success 'setup r3' '
+ git init r3 &&
+ mkdir r3/dir1 &&
+ for n in sparse1 sparse2
+ do
+ echo "This is file: $n" > r3/$n
+ git -C r3 add $n
+ echo "This is file: dir1/$n" > r3/dir1/$n
+ git -C r3 add dir1/$n
+ done &&
+ git -C r3 commit -m "sparse" &&
+ echo dir1/ >pattern1 &&
+ echo sparse1 >pattern2
+'
+
+test_expect_success 'verify sparse:path=pattern1 omits top-level files' '
+ git -C r3 ls-files -s sparse1 sparse2 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern1 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify sparse:path=pattern2 omits both sparse2 files' '
+ git -C r3 ls-files -s sparse2 dir1/sparse2 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern2 \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+# Test sparse:oid=<oid-ish> filter.
+# Like sparse:path, but we get the sparse-checkout specification from
+# a blob rather than a file on disk.
+
+test_expect_success 'setup r3 part 2' '
+ echo dir1/ >r3/pattern &&
+ git -C r3 add pattern &&
+ git -C r3 commit -m "pattern"
+'
+
+test_expect_success 'verify sparse:oid=OID omits top-level files' '
+ git -C r3 ls-files -s pattern sparse1 sparse2 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ oid=$(git -C r3 ls-files -s pattern | awk -f print_2.awk) &&
+ git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=$oid \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'verify sparse:oid=oid-ish omits top-level files' '
+ git -C r3 ls-files -s pattern sparse1 sparse2 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=master:pattern \
+ | awk -f print_1.awk \
+ | sed "s/~//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+# Delete some loose objects and use rev-list, but WITHOUT any filtering.
+# This models previously omitted objects that we did not receive.
+
+test_expect_success 'rev-list W/ print-missing' '
+ git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \
+ | awk -f print_2.awk \
+ | sort >expected &&
+ for id in `cat expected | sed "s|..|&/|"`
+ do
+ rm r1/.git/objects/$id
+ done &&
+ git -C r1 rev-list --quiet HEAD --filter-print-missing --objects \
+ | awk -f print_1.awk \
+ | sed "s/?//" \
+ | sort >observed &&
+ test_cmp observed expected
+'
+
+test_expect_success 'rev-list W/O print-missing fails' '
+ test_must_fail git -C r1 rev-list --quiet --objects HEAD
+'
+
+test_expect_success 'rev-list W/ ignore-missing' '
+ git -C r1 rev-list --quiet --filter-ignore-missing --objects HEAD
+'
+
+test_done
--
2.9.3
