The '--set-upstream' option of branch was deprecated in,
b347d06bf branch: deprecate --set-upstream and show help if we
detect possible mistaken use (Thu, 30 Aug 2012 19:23:13 +0200)
It was deprecated for the reasons specified in the commit message of
the referenced commit.
Refactor 'branch' so that it dies with an appropraite error message
when the '--set-upstream' is used.
Note that there's a reason behind "dying with an error message" instead of
"not accepting the '--set-upstream'". ;git branch' would still *accept*
'--set-upstream' even after it's removal as a consequence of "unique
prefix can be abbrievated in option names" AND '--set-upstream' is a unique
prefix of '--set-upstream-to' when '--set-upstream' has been removed. In
order to smooth the transition for users due to the "prefix issue" it was
decided to make branch die when seeing the '--set-upstream' flag for a few
years and let the users know that it would be removed some time in the future.
The before/after behaviour for a simple case follows,
$ git remote
origin
Before,
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
After,
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' flag is no longer supported and will be removed. Consider using '--track' or '--set-upstream-to'
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@xxxxxxxxx>
---
Changes in v2:
The previous patch removed the concerned option while the current patch
makes 'git branch' die on seeing the option.
The possibility of '--set-upstream' becoming an alias of '--set-upstream-to'
was documented.
Documentation/git-branch.txt | 8 +++----
builtin/branch.c | 21 +------------------
t/t3200-branch.sh | 50 ++++----------------------------------------
t/t6040-tracking-info.sh | 16 +++++++-------
4 files changed, 17 insertions(+), 78 deletions(-)
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index 81bd0a7b7..372107e0c 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -195,10 +195,10 @@ start-point is either a local or remote-tracking branch.
branch.autoSetupMerge configuration variable is true.
--set-upstream::
- If specified branch does not exist yet or if `--force` has been
- given, acts exactly like `--track`. Otherwise sets up configuration
- like `--track` would when creating the branch, except that where
- branch points to is not changed.
+ This option is no longer supported and will be removed in the future.
+ Consider using --track or --set-upstream-to instead.
++
+Note: This could possibly become an alias of --set-upstream-to in the future.
-u <upstream>::
--set-upstream-to=<upstream>::
diff --git a/builtin/branch.c b/builtin/branch.c
index a3bd2262b..2fcb6f7e5 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -755,8 +755,6 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
strbuf_release(&buf);
} else if (argc > 0 && argc <= 2) {
struct branch *branch = branch_get(argv[0]);
- int branch_existed = 0, remote_tracking = 0;
- struct strbuf buf = STRBUF_INIT;
if (!strcmp(argv[0], "HEAD"))
die(_("it does not make sense to create 'HEAD' manually"));
@@ -768,28 +766,11 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
die(_("-a and -r options to 'git branch' do not make sense with a branch name"));
if (track == BRANCH_TRACK_OVERRIDE)
- fprintf(stderr, _("The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to\n"));
+ die(_("the '--set-upstream' flag is no longer supported and will be removed. Consider using '--track' or '--set-upstream-to'"));
- strbuf_addf(&buf, "refs/remotes/%s", branch->name);
- remote_tracking = ref_exists(buf.buf);
- strbuf_release(&buf);
-
- branch_existed = ref_exists(branch->refname);
create_branch(argv[0], (argc == 2) ? argv[1] : head,
force, reflog, 0, quiet, track);
- /*
- * We only show the instructions if the user gave us
- * one branch which doesn't exist locally, but is the
- * name of a remote-tracking branch.
- */
- if (argc == 1 && track == BRANCH_TRACK_OVERRIDE &&
- !branch_existed && remote_tracking) {
- fprintf(stderr, _("\nIf you wanted to make '%s' track '%s', do this:\n\n"), head, branch->name);
- fprintf(stderr, " git branch -d %s\n", branch->name);
- fprintf(stderr, " git branch --set-upstream-to %s\n", branch->name);
- }
-
} else
usage_with_options(builtin_branch_usage, options);
diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
index dd37ac47c..249be4b1a 100755
--- a/t/t3200-branch.sh
+++ b/t/t3200-branch.sh
@@ -561,7 +561,8 @@ test_expect_success 'use --set-upstream-to modify a particular branch' '
git branch my13 &&
git branch --set-upstream-to master my13 &&
test "$(git config branch.my13.remote)" = "." &&
- test "$(git config branch.my13.merge)" = "refs/heads/master"
+ test "$(git config branch.my13.merge)" = "refs/heads/master" &&
+ git branch --unset-upstream my13
'
test_expect_success '--unset-upstream should fail if given a non-existent branch' '
@@ -605,38 +606,8 @@ test_expect_success 'test --unset-upstream on a particular branch' '
test_must_fail git config branch.my14.merge
'
-test_expect_success '--set-upstream shows message when creating a new branch that exists as remote-tracking' '
- git update-ref refs/remotes/origin/master HEAD &&
- git branch --set-upstream origin/master 2>actual &&
- test_when_finished git update-ref -d refs/remotes/origin/master &&
- test_when_finished git branch -d origin/master &&
- cat >expected <<EOF &&
-The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
-
-If you wanted to make '"'master'"' track '"'origin/master'"', do this:
-
- git branch -d origin/master
- git branch --set-upstream-to origin/master
-EOF
- test_i18ncmp expected actual
-'
-
-test_expect_success '--set-upstream with two args only shows the deprecation message' '
- git branch --set-upstream master my13 2>actual &&
- test_when_finished git branch --unset-upstream master &&
- cat >expected <<EOF &&
-The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
-EOF
- test_i18ncmp expected actual
-'
-
-test_expect_success '--set-upstream with one arg only shows the deprecation message if the branch existed' '
- git branch --set-upstream my13 2>actual &&
- test_when_finished git branch --unset-upstream my13 &&
- cat >expected <<EOF &&
-The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
-EOF
- test_i18ncmp expected actual
+test_expect_success '--set-upstream fails' '
+ test_must_fail git branch --set-upstream origin/master
'
test_expect_success '--set-upstream-to notices an error to set branch as own upstream' '
@@ -961,19 +932,6 @@ test_expect_success 'attempt to delete a branch merged to its base' '
test_must_fail git branch -d my10
'
-test_expect_success 'use set-upstream on the current branch' '
- git checkout master &&
- git --bare init myupstream.git &&
- git push myupstream.git master:refs/heads/frotz &&
- git remote add origin myupstream.git &&
- git fetch &&
- git branch --set-upstream master origin/frotz &&
-
- test "z$(git config branch.master.remote)" = "zorigin" &&
- test "z$(git config branch.master.merge)" = "zrefs/heads/frotz"
-
-'
-
test_expect_success 'use --edit-description' '
write_script editor <<-\EOF &&
echo "New contents" >"$1"
diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh
index 97a07655a..4b522f456 100755
--- a/t/t6040-tracking-info.sh
+++ b/t/t6040-tracking-info.sh
@@ -188,35 +188,35 @@ test_expect_success 'fail to track annotated tags' '
test_must_fail git checkout heavytrack
'
-test_expect_success 'setup tracking with branch --set-upstream on existing branch' '
+test_expect_success 'setup tracking with branch --set-upstream-to on existing branch' '
git branch from-master master &&
test_must_fail git config branch.from-master.merge > actual &&
- git branch --set-upstream from-master master &&
+ git branch --set-upstream-to master from-master &&
git config branch.from-master.merge > actual &&
grep -q "^refs/heads/master$" actual
'
-test_expect_success '--set-upstream does not change branch' '
+test_expect_success '--set-upstream-to does not change branch' '
git branch from-master2 master &&
test_must_fail git config branch.from-master2.merge > actual &&
git rev-list from-master2 &&
git update-ref refs/heads/from-master2 from-master2^ &&
git rev-parse from-master2 >expect2 &&
- git branch --set-upstream from-master2 master &&
+ git branch --set-upstream-to master from-master2 &&
git config branch.from-master.merge > actual &&
git rev-parse from-master2 >actual2 &&
grep -q "^refs/heads/master$" actual &&
cmp expect2 actual2
'
-test_expect_success '--set-upstream @{-1}' '
- git checkout from-master &&
+test_expect_success '--set-upstream-to @{-1}' '
+ git checkout follower &&
git checkout from-master2 &&
git config branch.from-master2.merge > expect2 &&
- git branch --set-upstream @{-1} follower &&
+ git branch --set-upstream-to @{-1} from-master &&
git config branch.from-master.merge > actual &&
git config branch.from-master2.merge > actual2 &&
- git branch --set-upstream from-master follower &&
+ git branch --set-upstream-to follower from-master &&
git config branch.from-master.merge > expect &&
test_cmp expect2 actual2 &&
test_cmp expect actual
--
2.14.0.rc1.434.g6eded367a
