[PATCH v2 13/29] grep: add tests to fix blind spots with \0 patterns

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Address a big blind spot in the tests for patterns containing \0. The
is_fixed() function considers any string that contains \0 fixed, even
if it contains regular expression metacharacters, those patterns are
currently matched with kwset.

Before this change removing that memchr(s, 0, len) check from
is_fixed() wouldn't change the result of any of the tests, since
regcomp() will happily match the part before the \0.

Furthermore, the kwset path is dependent on whether the the -i flag is
on, and whether the pattern has any non-ASCII characters, but none of
this was tested for.

See the a previous commit in this series ("grep: add tests to fix
blind spots with \0 patterns", 2017-04-21) for further details &
rationale.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
---
 t/t7008-grep-binary.sh | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/t/t7008-grep-binary.sh b/t/t7008-grep-binary.sh
index e7754c3946..079395ba54 100755
--- a/t/t7008-grep-binary.sh
+++ b/t/t7008-grep-binary.sh
@@ -22,6 +22,18 @@ nul_match () {
 			printf '$pattern' | q_to_nul >f &&
 			test_must_fail git grep -f f $flags a
 		"
+	elif test "$status" = T1
+	then
+		test_expect_failure "git grep -f f $flags '$pattern_human' a" "
+			printf '$pattern' | q_to_nul >f &&
+			git grep -f f $flags a
+		"
+	elif test "$status" = T0
+	then
+		test_expect_failure "git grep -f f $flags '$pattern_human' a" "
+			printf '$pattern' | q_to_nul >f &&
+			test_must_fail git grep -f f $flags a
+		"
 	else
 		test_expect_success "PANIC: Test framework error. Unknown status $status" 'false'
 	fi
@@ -98,6 +110,65 @@ nul_match 1 '-Fi' 'YQf'
 nul_match 0 '-Fi' 'YQx'
 nul_match 1 '' 'yQf'
 nul_match 0 '' 'yQx'
+nul_match 1 '' 'æQð'
+nul_match 1 '-F' 'eQm[*]c'
+nul_match 1 '-Fi' 'EQM[*]C'
+
+# Regex patterns that would match but shouldn't with -F
+nul_match 0 '-F' 'yQ[f]'
+nul_match 0 '-F' '[y]Qf'
+nul_match 0 '-Fi' 'YQ[F]'
+nul_match 0 '-Fi' '[Y]QF'
+nul_match 0 '-F' 'æQ[ð]'
+nul_match 0 '-F' '[æ]Qð'
+nul_match 0 '-Fi' 'ÆQ[Ð]'
+nul_match 0 '-Fi' '[Æ]QÐ'
+
+# kwset is disabled on -i & non-ASCII. No way to match non-ASCII \0
+# patterns case-insensitively.
+nul_match T1 '-i' 'ÆQÐ'
+
+# \0 implicitly disables regexes. This is an undocumented internal
+# limitation.
+nul_match T1 '' 'yQ[f]'
+nul_match T1 '' '[y]Qf'
+nul_match T1 '-i' 'YQ[F]'
+nul_match T1 '-i' '[Y]Qf'
+nul_match T1 '' 'æQ[ð]'
+nul_match T1 '' '[æ]Qð'
+nul_match T1 '-i' 'ÆQ[Ð]'
+
+# ... because of \0 implicitly disabling regexes regexes that
+# should/shouldn't match don't do the right thing.
+nul_match T1 '' 'eQm.*cQ'
+nul_match T1 '-i' 'EQM.*cQ'
+nul_match T0 '' 'eQm[*]c'
+nul_match T0 '-i' 'EQM[*]C'
+
+# Due to the REG_STARTEND extension when kwset() is disabled on -i &
+# non-ASCII the string will be matched in its entirety, but the
+# pattern will be cut off at the first \0.
+nul_match 0 '-i' 'NOMATCHQð'
+nul_match T0 '-i' '[Æ]QNOMATCH'
+nul_match T0 '-i' '[æ]QNOMATCH'
+# Matches, but for the wrong reasons, just stops at [æ]
+nul_match 1 '-i' '[Æ]Qð'
+nul_match 1 '-i' '[æ]Qð'
+
+# Ensure that the matcher doesn't regress to something that stops at
+# \0
+nul_match 0 '-F' 'yQ[f]'
+nul_match 0 '-Fi' 'YQ[F]'
+nul_match 0 '' 'yQNOMATCH'
+nul_match 0 '' 'QNOMATCH'
+nul_match 0 '-i' 'YQNOMATCH'
+nul_match 0 '-i' 'QNOMATCH'
+nul_match 0 '-F' 'æQ[ð]'
+nul_match 0 '-Fi' 'ÆQ[Ð]'
+nul_match 0 '' 'yQNÓMATCH'
+nul_match 0 '' 'QNÓMATCH'
+nul_match 0 '-i' 'YQNÓMATCH'
+nul_match 0 '-i' 'QNÓMATCH'
 
 test_expect_success 'grep respects binary diff attribute' '
 	echo text >t &&
-- 
2.11.0




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]