Rename the LIBPCRE prerequisite to PCRE. This is for preparation for
libpcre2 support, where having just "LIBPCRE" would be confusing as it
implies v1 of the library.
None of these tests are incompatible between versions 1 & 2 of
libpcre, it's less confusing to give them a more general name to make
it clear that they work on both library versions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
---
t/README | 4 ++--
t/t4202-log.sh | 10 +++++-----
t/t7810-grep.sh | 32 ++++++++++++++++----------------
t/t7812-grep-icase-non-ascii.sh | 4 ++--
t/t7813-grep-icase-iso.sh | 2 +-
t/t7814-grep-recurse-submodules.sh | 2 +-
t/test-lib.sh | 2 +-
7 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/t/README b/t/README
index ab386c3681..a90cb62583 100644
--- a/t/README
+++ b/t/README
@@ -803,9 +803,9 @@ use these, and "test_set_prereq" for how to define your own.
Test is not run by root user, and an attempt to write to an
unwritable file is expected to fail correctly.
- - LIBPCRE
+ - PCRE
- Git was compiled with USE_LIBPCRE=YesPlease. Wrap any tests
+ Git was compiled with support for PCRE. Wrap any tests
that use git-grep --perl-regexp or git-grep -P in these.
- CASE_INSENSITIVE_FS
diff --git a/t/t4202-log.sh b/t/t4202-log.sh
index 06acc848b8..0b5f808ca3 100755
--- a/t/t4202-log.sh
+++ b/t/t4202-log.sh
@@ -266,7 +266,7 @@ test_expect_success 'log -F -E --grep=<ere> uses ere' '
test_cmp expect actual
'
-test_expect_success LIBPCRE 'log -F -E --perl-regexp --grep=<pcre> uses PCRE' '
+test_expect_success PCRE 'log -F -E --perl-regexp --grep=<pcre> uses PCRE' '
test_when_finished "rm -rf num_commits" &&
git init num_commits &&
(
@@ -314,7 +314,7 @@ test_expect_success 'log with various grep.patternType configurations & command-
--grep="(.|.)" >actual.basic &&
git -c grep.patternType=extended log --pretty=tformat:%s \
--grep="\|2" >actual.extended &&
- if test_have_prereq LIBPCRE
+ if test_have_prereq PCRE
then
git -c grep.patternType=perl log --pretty=tformat:%s \
--grep="[\d]\|" >actual.perl
@@ -322,7 +322,7 @@ test_expect_success 'log with various grep.patternType configurations & command-
test_cmp expect.fixed actual.fixed &&
test_cmp expect.basic actual.basic &&
test_cmp expect.extended actual.extended &&
- if test_have_prereq LIBPCRE
+ if test_have_prereq PCRE
then
test_cmp expect.perl actual.perl
fi &&
@@ -349,7 +349,7 @@ test_expect_success 'log with various grep.patternType configurations & command-
--grep="(.|.)" >actual.basic.long-arg &&
git log --pretty=tformat:%s --extended-regexp \
--grep="\|2" >actual.extended.long-arg &&
- if test_have_prereq LIBPCRE
+ if test_have_prereq PCRE
then
git log --pretty=tformat:%s --perl-regexp \
--grep="[\d]\|" >actual.perl.long-arg
@@ -357,7 +357,7 @@ test_expect_success 'log with various grep.patternType configurations & command-
test_cmp expect.fixed actual.fixed.long-arg &&
test_cmp expect.basic actual.basic.long-arg &&
test_cmp expect.extended actual.extended.long-arg &&
- if test_have_prereq LIBPCRE
+ if test_have_prereq PCRE
then
test_cmp expect.perl actual.perl.long-arg
fi
diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh
index 7199356d35..f929b447e9 100755
--- a/t/t7810-grep.sh
+++ b/t/t7810-grep.sh
@@ -275,7 +275,7 @@ do
test_cmp expected actual
'
- test_expect_success LIBPCRE "grep $L with grep.patterntype=perl" '
+ test_expect_success PCRE "grep $L with grep.patterntype=perl" '
echo "${HC}ab:a+b*c" >expected &&
git -c grep.patterntype=perl grep "a\x{2b}b\x{2a}c" $H ab >actual &&
test_cmp expected actual
@@ -1053,12 +1053,12 @@ hello.c:int main(int argc, const char **argv)
hello.c: printf("Hello world.\n");
EOF
-test_expect_success LIBPCRE 'grep --perl-regexp pattern' '
+test_expect_success PCRE 'grep --perl-regexp pattern' '
git grep --perl-regexp "\p{Ps}.*?\p{Pe}" hello.c >actual &&
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P pattern' '
+test_expect_success PCRE 'grep -P pattern' '
git grep -P "\p{Ps}.*?\p{Pe}" hello.c >actual &&
test_cmp expected actual
'
@@ -1070,13 +1070,13 @@ test_expect_success 'grep pattern with grep.extendedRegexp=true' '
test_cmp empty actual
'
-test_expect_success LIBPCRE 'grep -P pattern with grep.extendedRegexp=true' '
+test_expect_success PCRE 'grep -P pattern with grep.extendedRegexp=true' '
git -c grep.extendedregexp=true \
grep -P "\p{Ps}.*?\p{Pe}" hello.c >actual &&
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P -v pattern' '
+test_expect_success PCRE 'grep -P -v pattern' '
{
echo "ab:a+b*c"
echo "ab:a+bc"
@@ -1085,7 +1085,7 @@ test_expect_success LIBPCRE 'grep -P -v pattern' '
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P -i pattern' '
+test_expect_success PCRE 'grep -P -i pattern' '
cat >expected <<-EOF &&
hello.c: printf("Hello world.\n");
EOF
@@ -1093,7 +1093,7 @@ test_expect_success LIBPCRE 'grep -P -i pattern' '
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P -w pattern' '
+test_expect_success PCRE 'grep -P -w pattern' '
{
echo "hello_world:Hello world"
echo "hello_world:HeLLo world"
@@ -1102,7 +1102,7 @@ test_expect_success LIBPCRE 'grep -P -w pattern' '
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P backreferences work (the PCRE NO_AUTO_CAPTURE flag is not set)' '
+test_expect_success PCRE 'grep -P backreferences work (the PCRE NO_AUTO_CAPTURE flag is not set)' '
git grep -P -h "(?P<one>.)(?P=one)" hello_world >actual &&
test_cmp hello_world actual &&
git grep -P -h "(.)\1" hello_world >actual &&
@@ -1125,11 +1125,11 @@ test_expect_success 'grep invalidpattern properly dies with grep.patternType=ext
test_must_fail git -c grep.patterntype=extended grep "a["
'
-test_expect_success LIBPCRE 'grep -P invalidpattern properly dies ' '
+test_expect_success PCRE 'grep -P invalidpattern properly dies ' '
test_must_fail git grep -P "a["
'
-test_expect_success LIBPCRE 'grep invalidpattern properly dies with grep.patternType=perl' '
+test_expect_success PCRE 'grep invalidpattern properly dies with grep.patternType=perl' '
test_must_fail git -c grep.patterntype=perl grep "a["
'
@@ -1198,13 +1198,13 @@ test_expect_success 'grep pattern with grep.patternType=fixed, =basic, =perl, =e
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -G -F -E -P pattern' '
+test_expect_success PCRE 'grep -G -F -E -P pattern' '
echo "d0:0" >expected &&
git grep -G -F -E -P "[\d]" d0 >actual &&
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep pattern with grep.patternType=fixed, =basic, =extended, =perl' '
+test_expect_success PCRE 'grep pattern with grep.patternType=fixed, =basic, =extended, =perl' '
echo "d0:0" >expected &&
git \
-c grep.patterntype=fixed \
@@ -1215,7 +1215,7 @@ test_expect_success LIBPCRE 'grep pattern with grep.patternType=fixed, =basic, =
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P pattern with grep.patternType=fixed' '
+test_expect_success PCRE 'grep -P pattern with grep.patternType=fixed' '
echo "ab:a+b*c" >expected &&
git \
-c grep.patterntype=fixed \
@@ -1350,12 +1350,12 @@ space: line with leading space2
space: line with leading space3
EOF
-test_expect_success LIBPCRE 'grep -E "^ "' '
+test_expect_success PCRE 'grep -E "^ "' '
git grep -E "^ " space >actual &&
test_cmp expected actual
'
-test_expect_success LIBPCRE 'grep -P "^ "' '
+test_expect_success PCRE 'grep -P "^ "' '
git grep -P "^ " space >actual &&
test_cmp expected actual
'
@@ -1512,7 +1512,7 @@ test_expect_success 'grep does not report i-t-a and assume unchanged with -L' '
test_cmp expected actual
'
-test_expect_success LIBPCRE "grep with grep.patternType synonyms perl/pcre/pcre1" '
+test_expect_success PCRE "grep with grep.patternType synonyms perl/pcre/pcre1" '
echo "#include <stdio.h>" >expected &&
git -c grep.patternType=perl grep -h --no-line-number "st(?=dio)" >actual &&
test_cmp expected actual &&
diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh
index 169fd8d706..04a61cb8e0 100755
--- a/t/t7812-grep-icase-non-ascii.sh
+++ b/t/t7812-grep-icase-non-ascii.sh
@@ -20,13 +20,13 @@ test_expect_success REGEX_LOCALE 'grep literal string, no -F' '
git grep -i "TILRAUN: HALLÓ HEIMUR!"
'
-test_expect_success GETTEXT_LOCALE,LIBPCRE 'grep pcre utf-8 icase' '
+test_expect_success GETTEXT_LOCALE,PCRE 'grep pcre utf-8 icase' '
git grep --perl-regexp "TILRAUN: H.lló Heimur!" &&
git grep --perl-regexp -i "TILRAUN: H.lló Heimur!" &&
git grep --perl-regexp -i "TILRAUN: H.LLÓ HEIMUR!"
'
-test_expect_success GETTEXT_LOCALE,LIBPCRE 'grep pcre utf-8 string with "+"' '
+test_expect_success GETTEXT_LOCALE,PCRE 'grep pcre utf-8 string with "+"' '
test_write_lines "TILRAUN: Hallóó Heimur!" >file2 &&
git add file2 &&
git grep -l --perl-regexp "TILRAUN: H.lló+ Heimur!" >actual &&
diff --git a/t/t7813-grep-icase-iso.sh b/t/t7813-grep-icase-iso.sh
index efef7fb81f..701e08a8e5 100755
--- a/t/t7813-grep-icase-iso.sh
+++ b/t/t7813-grep-icase-iso.sh
@@ -11,7 +11,7 @@ test_expect_success GETTEXT_ISO_LOCALE 'setup' '
export LC_ALL
'
-test_expect_success GETTEXT_ISO_LOCALE,LIBPCRE 'grep pcre string' '
+test_expect_success GETTEXT_ISO_LOCALE,PCRE 'grep pcre string' '
git grep --perl-regexp -i "TILRAUN: H.ll�imur!" &&
git grep --perl-regexp -i "TILRAUN: H.LL�HEIMUR!"
'
diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh
index 325fde53ef..dc6cf771ec 100755
--- a/t/t7814-grep-recurse-submodules.sh
+++ b/t/t7814-grep-recurse-submodules.sh
@@ -347,7 +347,7 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon
test_cmp expect actual &&
# Perl
- if test_have_prereq LIBPCRE
+ if test_have_prereq PCRE
then
git grep -P --recurse-submodules -e "(.|.)[\d]" >actual &&
cat >expect <<-\EOF &&
diff --git a/t/test-lib.sh b/t/test-lib.sh
index 13b5696822..6abf1d1918 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -1010,7 +1010,7 @@ esac
( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1
test -z "$NO_PERL" && test_set_prereq PERL
test -z "$NO_PYTHON" && test_set_prereq PYTHON
-test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE
+test -n "$USE_LIBPCRE" && test_set_prereq PCRE
test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
# Can we rely on git's output in the C locale?
--
2.11.0