A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config files are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes (not implemented in this patch) still go to
"config", not "config.worktree". A new option --worktree is added for
that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present so that it works in any setup.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@xxxxxxxxx>
---
Documentation/config.txt | 11 +++++++++--
Documentation/git-config.txt | 4 ++++
Documentation/git-worktree.txt | 31 +++++++++++++++++++++++++++++++
Documentation/gitrepository-layout.txt | 8 ++++++++
cache.h | 2 ++
config.c | 7 +++++++
environment.c | 1 +
setup.c | 5 ++++-
8 files changed, 66 insertions(+), 3 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 30cb946..c508386 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -2,8 +2,9 @@ CONFIGURATION FILE
------------------
The Git configuration file contains a number of variables that affect
-the Git commands' behavior. The `.git/config` file in each repository
-is used to store the configuration for that repository, and
+the Git commands' behavior. The files `.git/config` and optionally
+`config.worktree` (see `extensions.worktreeConfig` below) are each
+repository is used to store the configuration for that repository, and
`$HOME/.gitconfig` is used to store a per-user configuration as
fallback values for the `.git/config` file. The file `/etc/gitconfig`
can be used to store a system-wide default configuration.
@@ -264,6 +265,12 @@ advice.*::
show directions on how to proceed from the current state.
--
+extensions.worktreeConfig::
+ If set, by default "git config" reads from both "config" and
+ "config.worktree" file in that order. In multiple working
+ directory mode, "config" file is shared while
+ "config.worktree" is per-working directory.
+
core.fileMode::
Tells Git if the executable bit of files in the working tree
is to be honored.
diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt
index 83f86b9..806873c 100644
--- a/Documentation/git-config.txt
+++ b/Documentation/git-config.txt
@@ -253,6 +253,10 @@ $XDG_CONFIG_HOME/git/config::
$GIT_DIR/config::
Repository specific configuration file.
+$GIT_DIR/config.worktree::
+ This is optional and is only searched when
+ `extensions.worktreeConfig` is present in $GIT_DIR/config.
+
If no further options are given, all reading options will read all of these
files that are available. If the global or the system-wide configuration
file are not available they will be ignored. If the repository configuration
diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt
index e257c19..329a673 100644
--- a/Documentation/git-worktree.txt
+++ b/Documentation/git-worktree.txt
@@ -136,6 +136,37 @@ working trees, it can be used to identify worktrees. For example if
you only have two working trees, at "/abc/def/ghi" and "/abc/def/ggg",
then "ghi" or "def/ghi" is enough to point to the former working tree.
+CONFIGURATION FILE
+------------------
+By default, the repository "config" file is shared across all working
+directories. If the config variables `core.bare` or `core.worktree`
+are already present in the config file, they will be applied to the
+main working directory only.
+
+In order to have configuration specific to working directories, you
+can turn on "worktreeConfig" extension, e.g.:
+
+------------
+$ git config extensions.worktreeConfig true
+------------
+
+In this mode, specific configuration stays in the path pointed by `git
+rev-parse --git-path config.worktree`. You can add or update
+configuration in this file with `git config --worktree`. Git before
+version 2.13 will refuse to access repositories with this extension.
+
+Note that in this file, the exception for `core.bare` and
+`core.worktree` is gone. If you have them before, you need to move
+them to the `config.worktree` of the main working directory. You may
+also take this opportunity to move other configuration that you do not
+want to share to all working directories:
+
+ - `core.worktree` and `core.bare` should never be shared
+
+ - `core.sparseCheckout` is recommended per working directory, unless
+ you are sure you always use sparse checkout for all working
+ directories.
+
DETAILS
-------
Each linked working tree has a private sub-directory in the repository's
diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt
index a5f99cb..fee2557 100644
--- a/Documentation/gitrepository-layout.txt
+++ b/Documentation/gitrepository-layout.txt
@@ -143,6 +143,11 @@ config::
if $GIT_COMMON_DIR is set and "$GIT_COMMON_DIR/config" will be
used instead.
+config.worktree::
+ Working directory specific configuration file for the main
+ working directory in multiple working directory setup (see
+ linkgit:git-worktree[1]).
+
branches::
A slightly deprecated way to store shorthands to be used
to specify a URL to 'git fetch', 'git pull' and 'git push'.
@@ -276,6 +281,9 @@ worktrees/<id>/link::
file. It is used to detect if the linked repository is
manually removed.
+worktrees/<id>/config.worktree::
+ Working directory specific configuration file.
+
SEE ALSO
--------
linkgit:git-init[1],
diff --git a/cache.h b/cache.h
index a50a61a..c621a35 100644
--- a/cache.h
+++ b/cache.h
@@ -777,10 +777,12 @@ extern int grafts_replace_parents;
#define GIT_REPO_VERSION 0
#define GIT_REPO_VERSION_READ 1
extern int repository_format_precious_objects;
+extern int repository_format_worktree_config;
struct repository_format {
int version;
int precious_objects;
+ int worktree_config;
int is_bare;
char *work_tree;
struct string_list unknown_extensions;
diff --git a/config.c b/config.c
index 83fdecb..a461e68 100644
--- a/config.c
+++ b/config.c
@@ -1307,6 +1307,13 @@ static int do_git_config_sequence(config_fn_t fn, void *data)
if (repo_config && !access_or_die(repo_config, R_OK, 0))
ret += git_config_from_file(fn, repo_config, data);
+ if (repository_format_worktree_config) {
+ char *path = git_pathdup("config.worktree");
+ if (!access_or_die(path, R_OK, 0))
+ ret += git_config_from_file(fn, path, data);
+ free(path);
+ }
+
current_parsing_scope = CONFIG_SCOPE_CMDLINE;
if (git_config_from_parameters(fn, data) < 0)
die(_("unable to parse command-line config"));
diff --git a/environment.c b/environment.c
index 0935ec6..df1be15 100644
--- a/environment.c
+++ b/environment.c
@@ -26,6 +26,7 @@ int warn_ambiguous_refs = 1;
int warn_on_object_refname_ambiguity = 1;
int ref_paranoia = -1;
int repository_format_precious_objects;
+int repository_format_worktree_config;
const char *git_commit_encoding;
const char *git_log_output_encoding;
const char *apply_default_whitespace;
diff --git a/setup.c b/setup.c
index fe572b8..69efe45 100644
--- a/setup.c
+++ b/setup.c
@@ -389,6 +389,8 @@ static int check_repo_format(const char *var, const char *value, void *vdata)
;
else if (!strcmp(ext, "preciousobjects"))
data->precious_objects = git_config_bool(var, value);
+ else if (!strcmp(ext, "worktreeconfig"))
+ data->worktree_config = git_config_bool(var, value);
else
string_list_append(&data->unknown_extensions, ext);
} else if (strcmp(var, "core.bare") == 0) {
@@ -432,8 +434,9 @@ static int check_repository_format_gently(const char *gitdir, int *nongit_ok)
}
repository_format_precious_objects = candidate.precious_objects;
+ repository_format_worktree_config = candidate.worktree_config;
string_list_clear(&candidate.unknown_extensions, 0);
- if (!has_common) {
+ if (!has_common || repository_format_worktree_config) {
if (candidate.is_bare != -1) {
is_bare_repository_cfg = candidate.is_bare;
if (is_bare_repository_cfg == 1)
--
2.8.2.524.g6ff3d78