From: Lars Schneider <larsxschneider@xxxxxxxxx>
Git's clean/smudge mechanism invokes an external filter process for every
single blob that is affected by a filter. If Git filters a lot of blobs
then the startup time of the external filter processes can become a
significant part of the overall Git execution time.
This patch adds the filter.<driver>.useProtocol option which, if enabled,
keeps the external filter process running and processes all blobs with
the following protocol over stdin/stdout.
1. Git starts the filter on first usage and expects a welcome message
with protocol version number:
Git <-- Filter: "git-filter-protocol\n"
Git <-- Filter: "version 1"
2. Git sends the command (either "smudge" or "clean"), the filename, the
content size in bytes, and the content separated by a newline character:
Git --> Filter: "smudge\n"
Git --> Filter: "testfile.dat\n"
Git --> Filter: "7\n"
Git --> Filter: "CONTENT"
3. The filter is expected to answer with the result content size in
bytes and the result content separated by a newline character:
Git <-- Filter: "15\n"
Git <-- Filter: "SMUDGED_CONTENT"
4. The filter is expected to wait for the next file in step 2, again.
Please note that the protocol filters do not support stream processing
with this implemenatation because the filter needs to know the length of
the result in advance. A protocol version 2 could address this in a
future patch.
Signed-off-by: Lars Schneider <larsxschneider@xxxxxxxxx>
Helped-by: Martin-Louis Bright <mlbright@xxxxxxxxx>
---
Documentation/gitattributes.txt | 41 +++++++-
convert.c | 210 ++++++++++++++++++++++++++++++++++++++--
t/t0021-conversion.sh | 170 ++++++++++++++++++++++++++++++++
t/t0021/rot13.pl | 80 +++++++++++++++
4 files changed, 494 insertions(+), 7 deletions(-)
create mode 100755 t/t0021/rot13.pl
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 8882a3e..7026d62 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -300,7 +300,10 @@ checkout, when the `smudge` command is specified, the command is
fed the blob object from its standard input, and its standard
output is used to update the worktree file. Similarly, the
`clean` command is used to convert the contents of worktree file
-upon checkin.
+upon checkin. By default these commands process only a single
+blob and terminate. If the setting filter.<driver>.useProtocol is
+enabled then Git can process all blobs with a single filter command
+invocation (see filter protocol below).
One use of the content filtering is to massage the content into a shape
that is more convenient for the platform, filesystem, and the user to use.
@@ -375,6 +378,42 @@ substitution. For example:
------------------------
+Filter Protocol
+^^^^^^^^^^^^^^^
+
+If the setting filter.<driver>.useProtocol is enabled then Git
+can process all blobs with a single filter command invocation
+by talking with the following protocol over stdin/stdout.
+
+Git starts the filter on first usage and expects a welcome
+message with protocol version number:
+------------------------
+Git < Filter: "git-filter-protocol\n"
+Git < Filter: "version 1"
+------------------------
+
+Afterwards Git sends a blob command (either "smudge" or "clean"),
+the filename, the content size in bytes, and the content separated
+by a newline character:
+------------------------
+Git > Filter: "smudge\n"
+Git > Filter: "testfile.dat\n"
+Git > Filter: "7\n"
+Git > Filter: "CONTENT"
+------------------------
+
+The filter is expected to answer with the result content size in
+bytes and the result content separated by a newline character:
+------------------------
+Git < Filter: "15\n"
+Git < Filter: "SMUDGED_CONTENT"
+------------------------
+
+Afterwards the filter is expected to wait for the next blob process
+command. A demo implementation can be found in `t/t0021/rot13.pl`
+located in the Git core repository.
+
+
Interaction between checkin/checkout attributes
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/convert.c b/convert.c
index 522e2c5..91ce86f 100644
--- a/convert.c
+++ b/convert.c
@@ -481,12 +481,188 @@ static int apply_filter(const char *path, const char *src, size_t len, int fd,
return ret;
}
+static int cmd_process_map_init = 0;
+static struct hashmap cmd_process_map;
+
+struct cmd2process {
+ struct hashmap_entry ent; /* must be the first member! */
+ const char *cmd;
+ long protocol;
+ struct child_process process;
+};
+
+static int cmd2process_cmp(const struct cmd2process *e1,
+ const struct cmd2process *e2,
+ const void *unused)
+{
+ return strcmp(e1->cmd, e2->cmd);
+}
+
+static struct cmd2process *find_protocol_filter_entry(const char *cmd)
+{
+ struct cmd2process k;
+ hashmap_entry_init(&k, strhash(cmd));
+ k.cmd = cmd;
+ return hashmap_get(&cmd_process_map, &k, NULL);
+}
+
+static void stop_protocol_filter(struct cmd2process *entry) {
+ if (!entry)
+ return;
+ sigchain_push(SIGPIPE, SIG_IGN);
+ close(entry->process.in);
+ close(entry->process.out);
+ sigchain_pop(SIGPIPE);
+ finish_command(&entry->process);
+ child_process_clear(&entry->process);
+ hashmap_remove(&cmd_process_map, entry, NULL);
+ free(entry);
+}
+
+static struct cmd2process *start_protocol_filter(const char *cmd)
+{
+ int ret = 1;
+ struct cmd2process *entry = NULL;
+ struct child_process *process = NULL;
+ struct strbuf nbuf = STRBUF_INIT;
+ struct string_list split = STRING_LIST_INIT_NODUP;
+ const char *argv[] = { NULL, NULL };
+ const char *header = "git-filter-protocol\nversion";
+
+ entry = xmalloc(sizeof(*entry));
+ hashmap_entry_init(entry, strhash(cmd));
+ entry->cmd = cmd;
+ process = &entry->process;
+
+ child_process_init(process);
+ argv[0] = cmd;
+ process->argv = argv;
+ process->use_shell = 1;
+ process->in = -1;
+ process->out = -1;
+
+ if (start_command(process)) {
+ error("cannot fork to run external persistent filter '%s'", cmd);
+ return NULL;
+ }
+ strbuf_reset(&nbuf);
+
+ sigchain_push(SIGPIPE, SIG_IGN);
+ ret &= strbuf_read_once(&nbuf, process->out, 0) > 0;
+ sigchain_pop(SIGPIPE);
+
+ strbuf_stripspace(&nbuf, 0);
+ string_list_split_in_place(&split, nbuf.buf, ' ', 2);
+ ret &= split.nr > 1;
+ ret &= strncmp(header, split.items[0].string, strlen(header)) == 0;
+ if (ret) {
+ entry->protocol = strtol(split.items[1].string, NULL, 10);
+ switch (entry->protocol) {
+ case 1:
+ break;
+ default:
+ ret = 0;
+ error("unsupported protocol version %s for external persistent filter '%s'",
+ nbuf.buf, cmd);
+ }
+ }
+ string_list_clear(&split, 0);
+ strbuf_release(&nbuf);
+
+ if (!ret) {
+ error("initialization for external persistent filter '%s' failed", cmd);
+ return NULL;
+ }
+
+ hashmap_add(&cmd_process_map, entry);
+ return entry;
+}
+
+static int apply_protocol_filter(const char *path, const char *src, size_t len,
+ int fd, struct strbuf *dst, const char *cmd,
+ const char *filter_type)
+{
+ int ret = 1;
+ struct cmd2process *entry = NULL;
+ struct child_process *process = NULL;
+ struct stat fileStat;
+ struct strbuf nbuf = STRBUF_INIT;
+ size_t nbuf_len;
+ char *strtol_end;
+ char c;
+
+ if (!cmd || !*cmd)
+ return 0;
+
+ if (!dst)
+ return 1;
+
+ if (!cmd_process_map_init) {
+ cmd_process_map_init = 1;
+ hashmap_init(&cmd_process_map, (hashmap_cmp_fn) cmd2process_cmp, 0);
+ } else {
+ entry = find_protocol_filter_entry(cmd);
+ }
+
+ if (!entry){
+ entry = start_protocol_filter(cmd);
+ if (!entry) {
+ stop_protocol_filter(entry);
+ return 0;
+ }
+ }
+ process = &entry->process;
+
+ sigchain_push(SIGPIPE, SIG_IGN);
+ switch (entry->protocol) {
+ case 1:
+ if (fd >= 0 && !src) {
+ ret &= fstat(fd, &fileStat) != -1;
+ len = fileStat.st_size;
+ }
+ strbuf_reset(&nbuf);
+ strbuf_addf(&nbuf, "%s\n%s\n%zu\n", filter_type, path, len);
+ ret &= write_str_in_full(process->in, nbuf.buf) > 1;
+ if (len > 0) {
+ if (src)
+ ret &= write_in_full(process->in, src, len) == len;
+ else if (fd >= 0)
+ ret &= copy_fd(fd, process->in) == 0;
+ else
+ ret &= 0;
+ }
+
+ strbuf_reset(&nbuf);
+ while (xread(process->out, &c, 1) == 1 && c != '\n')
+ strbuf_addchars(&nbuf, c, 1);
+ nbuf_len = (size_t)strtol(nbuf.buf, &strtol_end, 10);
+ ret &= (strtol_end != nbuf.buf && errno != ERANGE);
+ strbuf_reset(&nbuf);
+ if (nbuf_len > 0)
+ ret &= strbuf_read_once(&nbuf, process->out, nbuf_len) == nbuf_len;
+ break;
+ default:
+ ret = 0;
+ }
+ sigchain_pop(SIGPIPE);
+
+ if (ret) {
+ strbuf_swap(dst, &nbuf);
+ } else {
+ // Something went wrong with the protocol filter. Force shutdown!
+ stop_protocol_filter(entry);
+ }
+ strbuf_release(&nbuf);
+ return ret;
+}
+
static struct convert_driver {
const char *name;
struct convert_driver *next;
const char *smudge;
const char *clean;
int required;
+ int use_protocol;
} *user_convert, **user_convert_tail;
static int read_convert_config(const char *var, const char *value, void *cb)
@@ -526,6 +702,11 @@ static int read_convert_config(const char *var, const char *value, void *cb)
if (!strcmp("clean", key))
return git_config_string(&drv->clean, var, value);
+ if (!strcmp("useprotocol", key)) {
+ drv->use_protocol = git_config_bool(var, value);
+ return 0;
+ }
+
if (!strcmp("required", key)) {
drv->required = git_config_bool(var, value);
return 0;
@@ -823,7 +1004,10 @@ int would_convert_to_git_filter_fd(const char *path)
if (!ca.drv->required)
return 0;
- return apply_filter(path, NULL, 0, -1, NULL, ca.drv->clean);
+ if (ca.drv->use_protocol)
+ return apply_protocol_filter(path, NULL, 0, -1, NULL, ca.drv->clean, "clean");
+ else
+ return apply_filter(path, NULL, 0, -1, NULL, ca.drv->clean);
}
const char *get_convert_attr_ascii(const char *path)
@@ -857,16 +1041,20 @@ int convert_to_git(const char *path, const char *src, size_t len,
{
int ret = 0;
const char *filter = NULL;
- int required = 0;
+ int required = 0, use_protocol = 0;
struct conv_attrs ca;
convert_attrs(&ca, path);
if (ca.drv) {
filter = ca.drv->clean;
required = ca.drv->required;
+ use_protocol = ca.drv->use_protocol;
}
- ret |= apply_filter(path, src, len, -1, dst, filter);
+ if (use_protocol)
+ ret |= apply_protocol_filter(path, src, len, -1, dst, filter, "clean");
+ else
+ ret |= apply_filter(path, src, len, -1, dst, filter);
if (!ret && required)
die("%s: clean filter '%s' failed", path, ca.drv->name);
@@ -885,13 +1073,19 @@ int convert_to_git(const char *path, const char *src, size_t len,
void convert_to_git_filter_fd(const char *path, int fd, struct strbuf *dst,
enum safe_crlf checksafe)
{
+ int ret = 0;
struct conv_attrs ca;
convert_attrs(&ca, path);
assert(ca.drv);
assert(ca.drv->clean);
- if (!apply_filter(path, NULL, 0, fd, dst, ca.drv->clean))
+ if (ca.drv->use_protocol)
+ ret = apply_protocol_filter(path, NULL, 0, fd, dst, ca.drv->clean, "clean");
+ else
+ ret = apply_filter(path, NULL, 0, fd, dst, ca.drv->clean);
+
+ if (!ret)
die("%s: clean filter '%s' failed", path, ca.drv->name);
crlf_to_git(path, dst->buf, dst->len, dst, ca.crlf_action, checksafe);
@@ -904,13 +1098,14 @@ static int convert_to_working_tree_internal(const char *path, const char *src,
{
int ret = 0, ret_filter = 0;
const char *filter = NULL;
- int required = 0;
+ int required = 0, use_protocol = 0;
struct conv_attrs ca;
convert_attrs(&ca, path);
if (ca.drv) {
filter = ca.drv->smudge;
required = ca.drv->required;
+ use_protocol = ca.drv->use_protocol;
}
ret |= ident_to_worktree(path, src, len, dst, ca.ident);
@@ -930,7 +1125,10 @@ static int convert_to_working_tree_internal(const char *path, const char *src,
}
}
- ret_filter = apply_filter(path, src, len, -1, dst, filter);
+ if (use_protocol)
+ ret_filter = apply_protocol_filter(path, src, len, -1, dst, filter, "smudge");
+ else
+ ret_filter |= apply_filter(path, src, len, -1, dst, filter);
if (!ret_filter && required)
die("%s: smudge filter %s failed", path, ca.drv->name);
diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh
index a05a8d2..d9077ea 100755
--- a/t/t0021-conversion.sh
+++ b/t/t0021-conversion.sh
@@ -268,4 +268,174 @@ test_expect_success 'disable filter with empty override' '
test_must_be_empty err
'
+test_expect_success 'required protocol filter should filter data' '
+ test_config_global filter.protocol.smudge \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.clean \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.useprotocol true &&
+ test_config_global filter.protocol.required true &&
+ rm -rf repo &&
+ mkdir repo &&
+ (
+ cd repo &&
+ git init &&
+
+ echo "*.r filter=protocol" >.gitattributes &&
+ git add . &&
+ git commit . -m "test commit" &&
+ git branch empty &&
+
+ cat ../test.o >test.r &&
+ echo "test22" >test2.r &&
+ echo "test333" >test3.r &&
+
+ rm -f output.log &&
+ git add . &&
+ sort output.log | uniq -c | sed "s/^[ ]*//" >uniq_output.log &&
+ cat >expected_add.log <<-\EOF &&
+ 1 IN: clean test.r 57 [OK] -- OUT: 57 [OK]
+ 1 IN: clean test2.r 7 [OK] -- OUT: 7 [OK]
+ 1 IN: clean test3.r 8 [OK] -- OUT: 8 [OK]
+ 1 start
+ 1 wrote version
+ EOF
+ test_cmp expected_add.log uniq_output.log &&
+
+ printf "" >output.log &&
+ git commit . -m "test commit" &&
+ sort output.log | uniq -c | sed "s/^[ ]*//" |
+ sed "s/^\([0-9]\) IN: clean/x IN: clean/" >uniq_output.log &&
+ cat >expected_commit.log <<-\EOF &&
+ x IN: clean test.r 57 [OK] -- OUT: 57 [OK]
+ x IN: clean test2.r 7 [OK] -- OUT: 7 [OK]
+ x IN: clean test3.r 8 [OK] -- OUT: 8 [OK]
+ 1 start
+ 1 wrote version
+ EOF
+ test_cmp expected_commit.log uniq_output.log &&
+
+ printf "" >output.log &&
+ rm -f test?.r &&
+ git checkout . &&
+ cat output.log | grep -v "IN: clean" >smudge_output.log &&
+ cat >expected_checkout.log <<-\EOF &&
+ start
+ wrote version
+ IN: smudge test2.r 7 [OK] -- OUT: 7 [OK]
+ IN: smudge test3.r 8 [OK] -- OUT: 8 [OK]
+ EOF
+ test_cmp expected_checkout.log smudge_output.log &&
+
+ git checkout empty &&
+
+ printf "" >output.log &&
+ git checkout master &&
+ cat output.log | grep -v "IN: clean" >smudge_output.log &&
+ cat >expected_checkout_master.log <<-\EOF &&
+ start
+ wrote version
+ IN: smudge test.r 57 [OK] -- OUT: 57 [OK]
+ IN: smudge test2.r 7 [OK] -- OUT: 7 [OK]
+ IN: smudge test3.r 8 [OK] -- OUT: 8 [OK]
+ EOF
+ test_cmp expected_checkout_master.log smudge_output.log
+ )
+'
+
+test_expect_success EXPENSIVE 'protocol filter large file' '
+ test_config_global filter.protocol.clean \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.smudge \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ rm -rf repo &&
+ mkdir repo &&
+ (
+ cd repo &&
+ git init &&
+
+ echo "2GB filter=largefile" >.gitattributes &&
+ for i in $(test_seq 1 2048); do printf "%1048576d" 1; done >2GB &&
+ git add 2GB 2>err &&
+ test_must_be_empty err &&
+ rm -f 2GB &&
+ git checkout -- 2GB 2>err &&
+ test_must_be_empty err
+ )
+'
+
+test_expect_success 'required protocol filter should fail with clean' '
+ test_config_global filter.protocol.clean \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.useprotocol true &&
+ test_config_global filter.protocol.required true &&
+ rm -rf repo &&
+ mkdir repo &&
+ (
+ cd repo &&
+ git init &&
+
+ echo "*.r filter=protocol" >.gitattributes &&
+
+ cat ../test.o >test.r &&
+ echo "this is going to fail" >clean-write-fail.r &&
+ echo "test333" >test3.r &&
+
+ # Note: There are three clean paths in convert.c we just test one here.
+ test_must_fail git add .
+ )
+'
+
+test_expect_success 'protocol filter should restart after failure' '
+ test_config_global filter.protocol.clean \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.smudge \"$TEST_DIRECTORY/t0021/rot13.pl\" &&
+ test_config_global filter.protocol.useprotocol true &&
+ rm -rf repo &&
+ mkdir repo &&
+ (
+ cd repo &&
+ git init &&
+
+ echo "*.r filter=protocol" >.gitattributes &&
+
+ cat ../test.o >test.r &&
+ echo "1234567" >test2.o &&
+ cat test2.o >test2.r &&
+ echo "this is going to fail" >smudge-write-fail.o &&
+ cat smudge-write-fail.o >smudge-write-fail.r &&
+ git add . &&
+ git commit . -m "test commit" &&
+ rm -f *.r &&
+
+ printf "" >output.log &&
+ git checkout . &&
+ cat output.log | grep -v "IN: clean" >smudge_output.log &&
+ cat >expected_checkout_master.log <<-\EOF &&
+ start
+ wrote version
+ IN: smudge smudge-write-fail.r 22 [OK] -- OUT: 22 [FAIL]
+ start
+ wrote version
+ IN: smudge test.r 57 [OK] -- OUT: 57 [OK]
+ IN: smudge test2.r 8 [OK] -- OUT: 8 [OK]
+ EOF
+ test_cmp expected_checkout_master.log smudge_output.log &&
+
+ test_cmp ../test.o test.r &&
+ ./../rot13.sh <../test.o >expected &&
+ git cat-file blob :test.r >actual &&
+ test_cmp expected actual
+
+ test_cmp test2.o test2.r &&
+ ./../rot13.sh <test2.o >expected &&
+ git cat-file blob :test2.r >actual &&
+ test_cmp expected actual
+
+ test_cmp test2.o test2.r &&
+ ./../rot13.sh <test2.o >expected &&
+ git cat-file blob :test2.r >actual &&
+ test_cmp expected actual
+
+ ! test_cmp smudge-write-fail.o smudge-write-fail.r && # Smudge failed!
+ ./../rot13.sh <smudge-write-fail.o >expected &&
+ git cat-file blob :smudge-write-fail.r >actual &&
+ test_cmp expected actual # Clean worked!
+ )
+'
+
test_done
diff --git a/t/t0021/rot13.pl b/t/t0021/rot13.pl
new file mode 100755
index 0000000..f2d7a03
--- /dev/null
+++ b/t/t0021/rot13.pl
@@ -0,0 +1,80 @@
+#!/usr/bin/env perl
+#
+# Example implementation for the Git filter protocol version 1
+# See Documentation/gitattributes.txt, section "Filter Protocol"
+#
+
+use strict;
+use warnings;
+use autodie;
+
+sub rot13 {
+ my ($str) = @_;
+ $str =~ y/A-Za-z/N-ZA-Mn-za-m/;
+ return $str;
+}
+
+$| = 1; # autoflush STDOUT
+
+open my $debug, ">>", "output.log";
+$debug->autoflush(1);
+
+print $debug "start\n";
+
+print STDOUT "git-filter-protocol\nversion 1";
+print $debug "wrote version\n";
+
+while (1) {
+ my $command = <STDIN>;
+ unless (defined($command)) {
+ exit();
+ }
+ chomp $command;
+ print $debug "IN: $command";
+ my $filename = <STDIN>;
+ chomp $filename;
+ print $debug " $filename";
+ my $filelen = <STDIN>;
+ chomp $filelen;
+ print $debug " $filelen";
+
+ $filelen = int($filelen);
+ my $output;
+
+ if ( $filelen > 0 ) {
+ my $input;
+ {
+ binmode(STDIN);
+ my $bytes_read = 0;
+ $bytes_read = read STDIN, $input, $filelen;
+ if ( $bytes_read != $filelen ) {
+ die "not enough to read";
+ }
+ print $debug " [OK] -- ";
+ }
+
+ if ( $command eq "clean") {
+ $output = rot13($input);
+ }
+ elsif ( $command eq "smudge" ) {
+ $output = rot13($input);
+ }
+ else {
+ die "bad command\n";
+ }
+ }
+
+ my $output_len = length($output);
+ print STDOUT "$output_len\n";
+ print $debug "OUT: $output_len";
+ if ( $output_len > 0 ) {
+ if ( ($command eq "clean" and $filename eq "clean-write-fail.r") or
+ ($command eq "smudge" and $filename eq "smudge-write-fail.r") ) {
+ print STDOUT "fail";
+ print $debug " [FAIL]\n"
+ } else {
+ print STDOUT $output;
+ print $debug " [OK]\n";
+ }
+ }
+}
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html