This is an application of the newly added CodingGuidelines to HEAD and
variants like FETCH_HEAD. It was obtained with:
perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@xxxxxxx>
---
Documentation/git-bisect.txt | 2 +-
Documentation/git-branch.txt | 4 ++--
Documentation/git-cvsimport.txt | 6 +++---
Documentation/git-cvsserver.txt | 2 +-
Documentation/git-daemon.txt | 2 +-
Documentation/git-gui.txt | 2 +-
Documentation/git-ls-tree.txt | 4 ++--
Documentation/git-p4.txt | 2 +-
Documentation/git-tag.txt | 2 +-
Documentation/gitremote-helpers.txt | 2 +-
Documentation/revisions.txt | 24 ++++++++++++------------
11 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt
index d9f960b..2bb9a57 100644
--- a/Documentation/git-bisect.txt
+++ b/Documentation/git-bisect.txt
@@ -358,7 +358,7 @@ OPTIONS
--no-checkout::
+
Do not checkout the new working tree at each iteration of the bisection
-process. Instead just update a special reference named 'BISECT_HEAD' to make
+process. Instead just update a special reference named `BISECT_HEAD` to make
it point to the commit that should be tested.
+
This option may be useful when the test you would perform in each step
diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt
index 123144f..1fe7344 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -39,10 +39,10 @@ named commit). With `--merged`, only branches merged into the named
commit (i.e. the branches whose tip commits are reachable from the named
commit) will be listed. With `--no-merged` only branches not merged into
the named commit will be listed. If the <commit> argument is missing it
-defaults to 'HEAD' (i.e. the tip of the current branch).
+defaults to `HEAD` (i.e. the tip of the current branch).
The command's second form creates a new branch head named <branchname>
-which points to the current 'HEAD', or <start-point> if given.
+which points to the current `HEAD`, or <start-point> if given.
Note that this will create the new branch, but it will not switch the
working tree to it; use "git checkout <newbranch>" to switch to the
diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt
index bbf1c2b..41207a2 100644
--- a/Documentation/git-cvsimport.txt
+++ b/Documentation/git-cvsimport.txt
@@ -74,10 +74,10 @@ OPTIONS
akin to the way 'git clone' uses 'origin' by default.
-o <branch-for-HEAD>::
- When no remote is specified (via -r) the 'HEAD' branch
+ When no remote is specified (via -r) the `HEAD` branch
from CVS is imported to the 'origin' branch within the Git
- repository, as 'HEAD' already has a special meaning for Git.
- When a remote is specified the 'HEAD' branch is named
+ repository, as `HEAD` already has a special meaning for Git.
+ When a remote is specified the `HEAD` branch is named
remotes/<remote>/master mirroring 'git clone' behaviour.
Use this option if you want to import into a different
branch.
diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt
index a1a5234..a336ae5 100644
--- a/Documentation/git-cvsserver.txt
+++ b/Documentation/git-cvsserver.txt
@@ -332,7 +332,7 @@ To get a checkout with the Eclipse CVS client:
3. Browse the 'modules' available. It will give you a list of the heads in
the repository. You will not be able to browse the tree from there. Only
the heads.
-4. Pick 'HEAD' when it asks what branch/tag to check out. Untick the
+4. Pick `HEAD` when it asks what branch/tag to check out. Untick the
"launch commit wizard" to avoid committing the .project file.
Protocol notes: If you are using anonymous access via pserver, just select that.
diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt
index 7901c54..3c91db7 100644
--- a/Documentation/git-daemon.txt
+++ b/Documentation/git-daemon.txt
@@ -296,7 +296,7 @@ they correspond to these IP addresses.
selectively enable/disable services per repository::
To enable 'git archive --remote' and disable 'git fetch' against
a repository, have the following in the configuration file in the
- repository (that is the file 'config' next to 'HEAD', 'refs' and
+ repository (that is the file 'config' next to `HEAD`, 'refs' and
'objects').
+
----------------------------------------------------------------
diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt
index 8144527..c1a3e8b 100644
--- a/Documentation/git-gui.txt
+++ b/Documentation/git-gui.txt
@@ -35,7 +35,7 @@ blame::
browser::
Start a tree browser showing all files in the specified
- commit (or 'HEAD' by default). Files selected through the
+ commit (or `HEAD` by default). Files selected through the
browser are opened in the blame viewer.
citool::
diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt
index a9f1909..dbc91f9 100644
--- a/Documentation/git-ls-tree.txt
+++ b/Documentation/git-ls-tree.txt
@@ -27,9 +27,9 @@ in the current working directory. Note that:
taken as relative to the current working directory. E.g. when you are
in a directory 'sub' that has a directory 'dir', you can run 'git
ls-tree -r HEAD dir' to list the contents of the tree (that is
- 'sub/dir' in 'HEAD'). You don't want to give a tree that is not at the
+ 'sub/dir' in `HEAD`). You don't want to give a tree that is not at the
root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that
- would result in asking for 'sub/sub/dir' in the 'HEAD' commit.
+ would result in asking for 'sub/sub/dir' in the `HEAD` commit.
However, the current working directory can be ignored by passing
--full-tree option.
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index 2703648..ac7e6a3 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -275,7 +275,7 @@ These options can be used to modify 'git p4 submit' behavior.
--origin <commit>::
Upstream location from which commits are identified to submit to
p4. By default, this is the most recent p4 commit reachable
- from 'HEAD'.
+ from `HEAD`.
-M::
Detect renames. See linkgit:git-diff[1]. Renames will be
diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt
index 499df56..dfd6b27 100644
--- a/Documentation/git-tag.txt
+++ b/Documentation/git-tag.txt
@@ -167,7 +167,7 @@ This option is only applicable when listing tags without annotation lines.
--[no-]merged [<commit>]::
Only list tags whose tips are reachable, or not reachable
- if `--no-merged` is used, from the specified commit ('HEAD'
+ if `--no-merged` is used, from the specified commit (`HEAD`
if not specified).
CONFIGURATION
diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt
index 53ce1d0..a4de50a 100644
--- a/Documentation/gitremote-helpers.txt
+++ b/Documentation/gitremote-helpers.txt
@@ -298,7 +298,7 @@ Supported if the helper has the "fetch" capability.
is followed by a blank line). For example, the following would
be two batches of 'push', the first asking the remote-helper
to push the local ref 'master' to the remote ref 'master' and
- the local 'HEAD' to the remote 'branch', and the second
+ the local `HEAD` to the remote 'branch', and the second
asking to push ref 'foo' to ref 'bar' (forced update requested
by the '+').
+
diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt
index 15879b3..abae363 100644
--- a/Documentation/revisions.txt
+++ b/Documentation/revisions.txt
@@ -28,8 +28,8 @@ blobs contained in a commit.
first match in the following rules:
. If '$GIT_DIR/<refname>' exists, that is what you mean (this is usually
- useful only for 'HEAD', 'FETCH_HEAD', 'ORIG_HEAD', 'MERGE_HEAD'
- and 'CHERRY_PICK_HEAD');
+ useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD`, `MERGE_HEAD`
+ and `CHERRY_PICK_HEAD`);
. otherwise, 'refs/<refname>' if it exists;
@@ -41,16 +41,16 @@ blobs contained in a commit.
. otherwise, 'refs/remotes/<refname>/HEAD' if it exists.
+
-'HEAD' names the commit on which you based the changes in the working tree.
-'FETCH_HEAD' records the branch which you fetched from a remote repository
+`HEAD` names the commit on which you based the changes in the working tree.
+`FETCH_HEAD` records the branch which you fetched from a remote repository
with your last `git fetch` invocation.
-'ORIG_HEAD' is created by commands that move your 'HEAD' in a drastic
-way, to record the position of the 'HEAD' before their operation, so that
+`ORIG_HEAD` is created by commands that move your `HEAD` in a drastic
+way, to record the position of the `HEAD` before their operation, so that
you can easily change the tip of the branch back to the state before you ran
them.
-'MERGE_HEAD' records the commit(s) which you are merging into your branch
+`MERGE_HEAD` records the commit(s) which you are merging into your branch
when you run `git merge`.
-'CHERRY_PICK_HEAD' records the commit which you are cherry-picking
+`CHERRY_PICK_HEAD` records the commit which you are cherry-picking
when you run `git cherry-pick`.
+
Note that any of the 'refs/*' cases above may come either from
@@ -59,7 +59,7 @@ While the ref name encoding is unspecified, UTF-8 is preferred as
some output processing may assume ref names in UTF-8.
'@'::
- '@' alone is a shortcut for 'HEAD'.
+ '@' alone is a shortcut for `HEAD`.
'<refname>@{<date>}', e.g. 'master@\{yesterday\}', 'HEAD@{5 minutes ago}'::
A ref followed by the suffix '@' with a date specification
@@ -101,7 +101,7 @@ some output processing may assume ref names in UTF-8.
'<branchname>@\{push\}', e.g. 'master@\{push\}', '@\{push\}'::
The suffix '@\{push}' reports the branch "where we would push to" if
`git push` were run while `branchname` was checked out (or the current
- 'HEAD' if no branchname is specified). Since our push destination is
+ `HEAD` if no branchname is specified). Since our push destination is
in a remote repository, of course, we report the local tracking branch
that corresponds to that branch (i.e., something in 'refs/remotes/').
+
@@ -283,12 +283,12 @@ To summarize:
'<rev1>..<rev2>'::
Include commits that are reachable from <rev2> but exclude
those that are reachable from <rev1>. When either <rev1> or
- <rev2> is omitted, it defaults to 'HEAD'.
+ <rev2> is omitted, it defaults to `HEAD`.
'<rev1>\...<rev2>'::
Include commits that are reachable from either <rev1> or
<rev2> but exclude those that are reachable from both. When
- either <rev1> or <rev2> is omitted, it defaults to 'HEAD'.
+ either <rev1> or <rev2> is omitted, it defaults to `HEAD`.
'<rev>{caret}@', e.g. 'HEAD{caret}@'::
A suffix '{caret}' followed by an at sign is the same as listing
--
2.8.2.397.gbe91ebf.dirty
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html