OPT_COUNTUP() merely increments the counter upon --option, and resets it to 0 upon --no-option, which means that there is no "unspecified" value with which a client can initialize the counter to determine whether or not --[no]-option was seen at all. Make OPT_COUNTUP() treat any negative number as an "unspecified" value to address this shortcoming. In particular, if a client initializes the counter to -1, then if it is still -1 after parse_options(), then neither --option nor --no-option was seen; If it is 0, then --no-option was seen last, and if it is 1 or greater, than --option was seen last. This change does not affect the behavior of existing clients because they all use the initial value of 0 (or more). Note that builtin/clean.c initializes the variable used with OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set to either 0 or 1 by reading the configuration before the code calls parse_options(), i.e. as far as parse_options() is concerned, the initial value of the variable is not negative. To test this behavior, in test-parse-options.c, "verbose" is set to "unspecified" while quiet is set to 0 which will test the new behavior with all sets of values. Helped-by: Jeff King <peff@xxxxxxxx> Helped-by: Eric Sunshine <sunshine@xxxxxxxxxxxxxx> Helped-by: Junio C Hamano <gitster@xxxxxxxxx> Signed-off-by: Pranit Bauva <pranit.bauva@xxxxxxxxx> --- The discussion about this patch: [1] : http://thread.gmane.org/gmane.comp.version-control.git/289027 Previous version of the patch: [v11] : http://thread.gmane.org/gmane.comp.version-control.git/288820 [v10] : http://thread.gmane.org/gmane.comp.version-control.git/288820 [v9] : http://thread.gmane.org/gmane.comp.version-control.git/288820 [v1] : http://thread.gmane.org/gmane.comp.version-control.git/289061 Changes wrt previous version (v12): - Use bits of commit message provided by Eric Sunshine. Please Note: The diff might seem improper especially the part where I have introduced some continuous lines but this is a logical error by git diff (nothing could be done about it) and thus the changes will be clearly visible with the original file itself. --- Documentation/technical/api-parse-options.txt | 8 ++++-- parse-options.c | 2 ++ t/t0040-parse-options.sh | 39 ++++++++++++++++++++------- test-parse-options.c | 3 ++- 4 files changed, 39 insertions(+), 13 deletions(-) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5f0757d..8908bf7 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -144,8 +144,12 @@ There are some macros to easily define options: `OPT_COUNTUP(short, long, &int_var, description)`:: Introduce a count-up option. - `int_var` is incremented on each use of `--option`, and - reset to zero with `--no-option`. + Each use of `--option` increments `int_var`, starting from zero + (even if initially negative), and `--no-option` resets it to + zero. To determine if `--option` or `--no-option` was set at + all, set `int_var` to a negative value, and if it is still + negative after parse_options(), then neither `--option` nor + `--no-option` was seen. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. diff --git a/parse-options.c b/parse-options.c index 47a9192..312a85d 100644 --- a/parse-options.c +++ b/parse-options.c @@ -110,6 +110,8 @@ static int get_value(struct parse_opt_ctx_t *p, return 0; case OPTION_COUNTUP: + if (*(int *)opt->value < 0) + *(int *)opt->value = 0; *(int *)opt->value = unset ? 0 : *(int *)opt->value + 1; return 0; diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index c913d1c..efcd844 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -63,7 +63,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -211,7 +211,7 @@ magnitude: 0 timestamp: 0 string: 123 abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -234,7 +234,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -263,7 +263,7 @@ magnitude: 0 timestamp: 0 string: 123 abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -302,7 +302,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -322,7 +322,7 @@ magnitude: 0 timestamp: 1 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 1 dry run: no file: (not set) @@ -344,7 +344,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -373,7 +373,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -398,7 +398,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -429,7 +429,7 @@ magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 +verbose: -1 quiet: 0 dry run: no file: (not set) @@ -454,6 +454,25 @@ dry run: no file: (not set) EOF +test_expect_success 'OPT_COUNTUP() resets to 0 with --no- flag' ' + test-parse-options --no-verbose >output 2>output.err && + test_must_be_empty output.err && + test_cmp expect output +' + +cat >expect <<EOF +boolean: 0 +integer: 0 +magnitude: 0 +timestamp: 0 +string: (not set) +abbrev: 7 +verbose: -1 +quiet: 0 +dry run: no +file: (not set) +EOF + test_expect_success 'negation of OPT_NONEG flags is not ambiguous' ' test-parse-options --no-ambig >output 2>output.err && test_must_be_empty output.err && diff --git a/test-parse-options.c b/test-parse-options.c index 86afa98..f02c275 100644 --- a/test-parse-options.c +++ b/test-parse-options.c @@ -7,7 +7,8 @@ static int integer = 0; static unsigned long magnitude = 0; static unsigned long timestamp; static int abbrev = 7; -static int verbose = 0, dry_run = 0, quiet = 0; +static int verbose = -1; /* unspecified */ +static int dry_run = 0, quiet = 0; static char *string = NULL; static char *file = NULL; static int ambiguous; -- https://github.com/git/git/pull/218 -- To unsubscribe from this list: send the line "unsubscribe git" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html