[PATCH v8 5/5] bisect: allow any terms set by user

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Antoine Delaite <antoine.delaite@xxxxxxxxxxxxxxxxxxxxxxx>

Introduction of the git bisect terms function.
The user can set its own terms.
It will work exactly like before. The terms must be set
before the start.

Signed-off-by: Antoine Delaite <antoine.delaite@xxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Louis Stuber <stuberl@xxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Matthieu Moy <Matthieu.Moy@xxxxxxx>
---
 Documentation/git-bisect.txt | 19 +++++++++++++
 git-bisect.sh                | 68 ++++++++++++++++++++++++++++++++++++++++----
 t/t6030-bisect-porcelain.sh  | 43 ++++++++++++++++++++++++++++
 3 files changed, 125 insertions(+), 5 deletions(-)

diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt
index 3c3021a..a37336e 100644
--- a/Documentation/git-bisect.txt
+++ b/Documentation/git-bisect.txt
@@ -133,6 +133,25 @@ You must run `git bisect start` without commits as argument and run
 `git bisect new <rev>`/`git bisect old <rev>...` after to add the
 commits.
 
+Alternative terms: use your own terms
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If the builtins terms bad/good and new/old do not satisfy you, you can
+set your own terms.
+
+------------------------------------------------
+git bisect terms term1 term2
+------------------------------------------------
+
+This command has to be used before a bisection has started.
+The term1 must be associated with the latest revisions and term2 with the
+ancestors of term1.
+
+Only the first bisection following the 'git bisect terms' will use the terms.
+If you mistyped one of the terms you can do again 'git bisect terms term1
+term2'.
+
+
 Bisect visualize
 ~~~~~~~~~~~~~~~~
 
diff --git a/git-bisect.sh b/git-bisect.sh
index 73763a2..8ef2b94 100644
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-USAGE='[help|start|bad|good|new|old|skip|next|reset|visualize|replay|log|run]'
+USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|replay|log|run]'
 LONG_USAGE='git bisect help
 	print this long help message.
 git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
@@ -11,6 +11,8 @@ git bisect (bad|new) [<rev>]
 git bisect (good|old) [<rev>...]
 	mark <rev>... known-good revisions/
 		revisions before change in a given property.
+git bisect terms term1 term2
+	set up term1 and term2 as bisection terms.
 git bisect skip [(<rev>|<range>)...]
 	mark <rev>... untestable revisions.
 git bisect next
@@ -82,6 +84,14 @@ bisect_start() {
 	# revision_seen is true if a git bisect start
 	# has revision as arguments
 	revision_seen=0
+	# terms_defined is used to detect if the user
+	# defined his own terms with git bisect terms
+	terms_defined=0
+	if test -s "$GIT_DIR/TERMS_DEFINED"
+	then
+		terms_defined=1
+		get_terms
+	fi
 	if test "z$(git rev-parse --is-bare-repository)" != zfalse
 	then
 		mode=--no-checkout
@@ -180,10 +190,14 @@ bisect_start() {
 	} &&
 	git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
 	eval "$eval true" &&
-	if test $revision_seen -eq 1 && test ! -s "$GIT_DIR/BISECT_TERMS"
+	if test $revision_seen -eq 1 && test ! -s "$GIT_DIR/BISECT_TERMS" || test $terms_defined -eq 1
 	then
 		echo "$NAME_BAD" >"$GIT_DIR/BISECT_TERMS" &&
-		echo "$NAME_GOOD" >>"$GIT_DIR/BISECT_TERMS"
+		echo "$NAME_GOOD" >>"$GIT_DIR/BISECT_TERMS" &&
+		if test $terms_defined -eq 1
+		then
+			echo "git bisect terms $NAME_BAD $NAME_GOOD" >>"$GIT_DIR/BISECT_LOG" || exit
+		fi
 	fi &&
 	echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 	#
@@ -419,6 +433,7 @@ bisect_clean_state() {
 	rm -f "$GIT_DIR/BISECT_NAMES" &&
 	rm -f "$GIT_DIR/BISECT_RUN" &&
 	rm -f "$GIT_DIR/BISECT_TERMS" &&
+	rm -f "$GIT_DIR/TERMS_DEFINED" &&
 	# Cleanup head-name if it got left by an old version of git-bisect
 	rm -f "$GIT_DIR/head-name" &&
 	git update-ref -d --no-deref BISECT_HEAD &&
@@ -447,6 +462,8 @@ bisect_replay () {
 			eval "$cmd" ;;
 		"$NAME_GOOD"|"$NAME_BAD"|skip)
 			bisect_write "$command" "$rev" ;;
+		terms)
+			bisect_terms $rev ;;
 		*)
 			die "$(gettext "?? what are you talking about?")" ;;
 		esac
@@ -531,7 +548,8 @@ get_terms () {
 check_and_set_terms () {
 	cmd="$1"
 	case "$cmd" in
-	bad|good|new|old)
+	skip|start|terms) ;;
+	*)
 		if test -s "$GIT_DIR/BISECT_TERMS" && test "$cmd" != "$NAME_BAD" && test "$cmd" != "$NAME_GOOD"
 		then
 			die "$(eval_gettext "Invalid command: you're currently in a \$NAME_BAD/\$NAME_GOOD bisect.")"
@@ -564,6 +582,44 @@ bisect_voc () {
 	esac
 }
 
+bisect_terms () {
+	case "$#" in
+	0)
+		if test -s "$GIT_DIR/BISECT_TERMS"
+		then
+			{
+			read term1
+			read term2
+			}<"$GIT_DIR/BISECT_TERMS"
+			gettextln "Your current terms are $term1 and $term2."
+		else
+			die "$(gettext "No terms defined.")"
+		fi ;;
+	2)
+		check_term_format refs/bisect/"$1"
+		check_term_format refs/bisect/"$2"
+		if ! test -s "$GIT_DIR/BISECT_START"
+		then
+			echo $1 >"$GIT_DIR/BISECT_TERMS" &&
+			echo $2 >>"$GIT_DIR/BISECT_TERMS" &&
+			echo "1" >"$GIT_DIR/TERMS_DEFINED"
+			echo "git bisect terms $NAME_BAD $NAME_GOOD" >>"$GIT_DIR/BISECT_LOG" || exit
+		else
+			die "$(gettext "A bisection has already started, and you can't change terms in the middle of it.
+Use 'git bisect terms' to see the current terms.
+Otherwise, to start a new bisection with new terms, please use 'git bisect reset' and set the terms before the start")"
+		fi ;;
+	*)
+		usage ;;
+	esac
+}
+
+check_term_format () {
+	arg="$1"
+	git check-ref-format $arg ||
+	die "$(eval_gettext "'\$arg' is not a valid term")"
+}
+
 case "$#" in
 0)
 	usage ;;
@@ -576,7 +632,7 @@ case "$#" in
 		git bisect -h ;;
 	start)
 		bisect_start "$@" ;;
-	bad|good|new|old)
+	bad|good|new|old|"$NAME_BAD"|"$NAME_GOOD")
 		bisect_state "$cmd" "$@" ;;
 	skip)
 		bisect_skip "$@" ;;
@@ -593,6 +649,8 @@ case "$#" in
 		bisect_log ;;
 	run)
 		bisect_run "$@" ;;
+	terms)
+		bisect_terms "$@" ;;
 	*)
 		usage ;;
 	esac
diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh
index 983c503..289dbb0 100755
--- a/t/t6030-bisect-porcelain.sh
+++ b/t/t6030-bisect-porcelain.sh
@@ -797,4 +797,47 @@ test_expect_success 'bisect cannot mix old/new and good/bad' '
 	test_must_fail git bisect old $HASH1
 '
 
+test_expect_success 'bisect start with one term1 and term2' '
+	git bisect reset &&
+	git bisect terms term1 term2 &&
+	git bisect start &&
+	git bisect term2 $HASH1 &&
+	git bisect term1 $HASH4 &&
+	git bisect term1 &&
+	git bisect term1 >bisect_result &&
+	grep "$HASH2 is the first term1 commit" bisect_result &&
+	git bisect log >log_to_replay.txt &&
+	git bisect reset
+'
+
+test_expect_success 'bisect replay with term1 and term2' '
+	git bisect replay log_to_replay.txt >bisect_result &&
+	grep "$HASH2 is the first term1 commit" bisect_result &&
+	git bisect reset
+'
+
+test_expect_success 'bisect start term1 term2' '
+	git bisect reset &&
+	git bisect terms term1 term2 &&
+	git bisect start $HASH4 $HASH1 &&
+	git bisect term1 &&
+	git bisect term1 >bisect_result &&
+	grep "$HASH2 is the first term1 commit" bisect_result &&
+	git bisect log >log_to_replay.txt &&
+	git bisect reset
+'
+
+test_expect_success 'bisect cannot mix terms' '
+	git bisect reset &&
+	git bisect terms a b &&
+	git bisect terms term1 term2 &&
+	git bisect start $HASH4 $HASH1 &&
+	test_must_fail git bisect a &&
+	test_must_fail git bisect b &&
+	test_must_fail git bisect bad &&
+	test_must_fail git bisect good &&
+	test_must_fail git bisect new &&
+	test_must_fail git bisect old
+'
+
 test_done
-- 
2.4.4.414.g59d82e6

--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]