Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@xxxxxxxxx>
---
.. while I'm looking at config.txt. I think this is the preferred naming
convention for config keys. I may have missed some in this file but
this is better than before already.
Documentation/config.txt | 220 +++++++++++++++++++++++------------------------
1 file changed, 110 insertions(+), 110 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 1530255..b4cc577 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -225,7 +225,7 @@ See linkgit:git-update-index[1].
+
The default is true (when core.filemode is not specified in the config file).
-core.ignorecase::
+core.ignoreCase::
If true, this option enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
like FAT. For example, if a directory listing finds
@@ -237,7 +237,7 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
will probe and set core.ignorecase true if appropriate when the repository
is created.
-core.precomposeunicode::
+core.precomposeUnicode::
This option is only used by Mac OS implementation of Git.
When core.precomposeunicode=true, Git reverts the unicode decomposition
of filenames done by Mac OS. This is useful when sharing a repository
@@ -257,20 +257,20 @@ core.protectNTFS::
8.3 "short" names.
Defaults to `true` on Windows, and `false` elsewhere.
-core.trustctime::
+core.trustCTime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
is regularly modified by something outside Git (file system
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
-core.checkstat::
+core.checkStat::
Determines which stat fields to match between the index
and work tree. The user can set this to 'default' or
'minimal'. Default (or explicitly 'default'), is to check
all fields, including the sub-second part of mtime and ctime.
-core.quotepath::
+core.quotePath::
The commands that output paths (e.g. 'ls-files',
'diff'), when not given the `-z` option, will quote
"unusual" characters in the pathname by enclosing the
@@ -290,7 +290,7 @@ core.eol::
linkgit:gitattributes[5] for more information on end-of-line
conversion.
-core.safecrlf::
+core.safeCRLF::
If true, makes Git check if converting `CRLF` is reversible when
end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
@@ -335,7 +335,7 @@ consistent, that is either all `LF` or all `CRLF`, but never mixed. A
file with mixed line endings would be reported by the `core.safecrlf`
mechanism.
-core.autocrlf::
+core.autoCRLF::
Setting this variable to "true" is almost the same as setting
the `text` attribute to "auto" on all files except that text
files are not guaranteed to be normalized: files that contain
@@ -476,7 +476,7 @@ core.compression::
If set, this provides a default to other compression variables,
such as 'core.loosecompression' and 'pack.compression'.
-core.loosecompression::
+core.looseCompression::
An integer -1..9, indicating the compression level for objects that
are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
@@ -537,7 +537,7 @@ be delta compressed, but larger binary media files won't be.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
-core.excludesfile::
+core.excludesFile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', Git looks into this file for patterns
of files which are not meant to be tracked. "`~/`" is expanded
@@ -546,7 +546,7 @@ core.excludesfile::
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore
is used instead. See linkgit:gitignore[5].
-core.askpass::
+core.askPass::
Some commands (e.g. svn and http interfaces) that interactively
ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the 'GIT_ASKPASS'
@@ -555,7 +555,7 @@ core.askpass::
prompt. The external program shall be given a suitable prompt as
command-line argument and write the password on its STDOUT.
-core.attributesfile::
+core.attributesFile::
In addition to '.gitattributes' (per-directory) and
'.git/info/attributes', Git looks into this file for attributes
(see linkgit:gitattributes[5]). Path expansions are made the same
@@ -569,7 +569,7 @@ core.editor::
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
-core.commentchar::
+core.commentChar::
Commands such as `commit` and `tag` that lets you edit
messages consider a line that begins with this character
commented, and removes them after the editor returns
@@ -638,7 +638,7 @@ core.whitespace::
is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
errors. The default tab width is 8. Allowed values are 1 to 63.
-core.fsyncobjectfiles::
+core.fsyncObjectFiles::
This boolean will enable 'fsync()' when writing object files.
+
This is a total waste of time and effort on a filesystem that orders
@@ -646,7 +646,7 @@ data writes properly, but can be useful for filesystems that do not use
journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
-core.preloadindex::
+core.preloadIndex::
Enable parallel index preload for operations like 'git diff'
+
This can speed up operations like 'git diff' and 'git status' especially
@@ -710,14 +710,14 @@ not necessarily be the current directory.
'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix'
from the original current directory. See linkgit:git-rev-parse[1].
-am.keepcr::
+am.keepCR::
If true, git-am will call git-mailsplit for patches in mbox format
with parameter '--keep-cr'. In this case git-mailsplit will
not remove `\r` from lines ending with `\r\n`. Can be overridden
by giving '--no-keep-cr' from the command line.
See linkgit:git-am[1], linkgit:git-mailsplit[1].
-apply.ignorewhitespace::
+apply.ignoreWhitespace::
When set to 'change', tells 'git apply' to ignore changes in
whitespace, in the same way as the '--ignore-space-change'
option.
@@ -729,7 +729,7 @@ apply.whitespace::
Tells 'git apply' how to handle whitespaces, in the same way
as the '--whitespace' option. See linkgit:git-apply[1].
-branch.autosetupmerge::
+branch.autoSetupMerge::
Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
starting point branch. Note that even if this option is not set,
@@ -741,7 +741,7 @@ branch.autosetupmerge::
local branch or remote-tracking
branch. This option defaults to true.
-branch.autosetuprebase::
+branch.autoSetupRebase::
When a new branch is created with 'git branch' or 'git checkout'
that tracks another branch, this variable tells Git to set
up pull to rebase instead of merge (see "branch.<name>.rebase").
@@ -767,7 +767,7 @@ branch.<name>.remote::
Additionally, `.` (a period) is the current local repository
(a dot-repository), see `branch.<name>.merge`'s final note below.
-branch.<name>.pushremote::
+branch.<name>.pushRemote::
When on branch <name>, it overrides `branch.<name>.remote` for
pushing. It also overrides `remote.pushdefault` for pushing
from branch <name>. When you pull from one place (e.g. your
@@ -794,7 +794,7 @@ branch.<name>.merge::
branch.<name>.merge to the desired branch, and use the relative path
setting `.` (a period) for branch.<name>.remote.
-branch.<name>.mergeoptions::
+branch.<name>.mergeOptions::
Sets default options for merging into branch <name>. The syntax and
supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
@@ -938,7 +938,7 @@ color.pager::
A boolean to enable/disable colored output when the pager is in
use (default is true).
-color.showbranch::
+color.showBranch::
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
@@ -1038,7 +1038,7 @@ commit.cleanup::
have to remove the help lines that begin with `#` in the commit log
template yourself, if you do this).
-commit.gpgsign::
+commit.gpgSign::
A boolean to specify whether all commits should be GPG signed.
Use of this option when doing operations such as rebase can
@@ -1151,7 +1151,7 @@ format.cc::
by mail. See the --to and --cc options in
linkgit:git-format-patch[1].
-format.subjectprefix::
+format.subjectPrefix::
The default for format-patch is to output files with the '[PATCH]'
subject prefix. Use this variable to change that prefix.
@@ -1161,7 +1161,7 @@ format.signature::
Set this variable to the empty string ("") to suppress
signature generation.
-format.signaturefile::
+format.signatureFile::
Works just like format.signature except the contents of the
file specified by this variable will be used as the signature.
@@ -1185,7 +1185,7 @@ format.thread::
A true boolean value is the same as `shallow`, and a false
value disables threading.
-format.signoff::
+format.signOff::
A boolean value which lets you enable the `-s/--signoff` option of
format-patch by default. *Note:* Adding the Signed-off-by: line to a
patch should be a conscious act and means that you certify you have
@@ -1224,17 +1224,17 @@ gc.auto::
light-weight garbage collection from time to time. The
default value is 6700. Setting this to 0 disables it.
-gc.autopacklimit::
+gc.autoPackLimit::
When there are more than this many packs that are not
marked with `*.keep` file in the repository, `git gc
--auto` consolidates them into one larger pack. The
default value is 50. Setting this to 0 disables it.
-gc.autodetach::
+gc.autoDetach::
Make `git gc --auto` return immediately and run in background
if the system supports it. Default is true.
-gc.packrefs::
+gc.packRefs::
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines whether
@@ -1242,38 +1242,38 @@ gc.packrefs::
to enable it within all non-bare repos or it can be set to a
boolean value. The default is `true`.
-gc.pruneexpire::
+gc.pruneExpire::
When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately.
-gc.reflogexpire::
-gc.<pattern>.reflogexpire::
+gc.reflogExpire::
+gc.<pattern>.reflogExpire::
'git reflog expire' removes reflog entries older than
this time; defaults to 90 days. With "<pattern>" (e.g.
"refs/stash") in the middle the setting applies only to
the refs that match the <pattern>.
-gc.reflogexpireunreachable::
-gc.<ref>.reflogexpireunreachable::
+gc.reflogExpireUnreachable::
+gc.<ref>.reflogExpireUnreachable::
'git reflog expire' removes reflog entries older than
this time and are not reachable from the current tip;
defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
in the middle, the setting applies only to the refs that
match the <pattern>.
-gc.rerereresolved::
+gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days. See linkgit:git-rerere[1].
-gc.rerereunresolved::
+gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days. See linkgit:git-rerere[1].
-gitcvs.commitmsgannotation::
+gitcvs.commitMsgAnnotation::
Append this string to each commit message. Set to empty string
to disable this feature. Defaults to "via git-CVS emulator".
@@ -1281,11 +1281,11 @@ gitcvs.enabled::
Whether the CVS server interface is enabled for this repository.
See linkgit:git-cvsserver[1].
-gitcvs.logfile::
+gitcvs.logFile::
Path to a log file where the CVS server interface well... logs
various stuff. See linkgit:git-cvsserver[1].
-gitcvs.usecrlfattr::
+gitcvs.useCrlfAttr::
If true, the server will look up the end-of-line conversion
attributes for files to determine the '-k' modes to use. If
the attributes force Git to treat a file as text,
@@ -1296,7 +1296,7 @@ gitcvs.usecrlfattr::
the file type to be determined, then 'gitcvs.allbinary' is
used. See linkgit:gitattributes[5].
-gitcvs.allbinary::
+gitcvs.allBinary::
This is used if 'gitcvs.usecrlfattr' does not resolve
the correct '-kb' mode to use. If true, all
unresolved files are sent to the client in
@@ -1306,7 +1306,7 @@ gitcvs.allbinary::
then the contents of the file are examined to decide if
it is binary, similar to 'core.autocrlf'.
-gitcvs.dbname::
+gitcvs.dbName::
Database used by git-cvsserver to cache revision information
derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver) this
@@ -1314,7 +1314,7 @@ gitcvs.dbname::
linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
Default: '%Ggitcvs.%m.sqlite'
-gitcvs.dbdriver::
+gitcvs.dbDriver::
Used Perl DBI driver. You can specify any available driver
for this here, but it might not work. git-cvsserver is tested
with 'DBD::SQLite', reported to work with 'DBD::Pg', and
@@ -1322,7 +1322,7 @@ gitcvs.dbdriver::
May not contain double colons (`:`). Default: 'SQLite'.
See linkgit:git-cvsserver[1].
-gitcvs.dbuser, gitcvs.dbpass::
+gitcvs.dbUser, gitcvs.dbPass::
Database user and password. Only useful if setting 'gitcvs.dbdriver',
since SQLite has no concept of database users and/or passwords.
'gitcvs.dbuser' supports variable substitution (see
@@ -1354,7 +1354,7 @@ gitweb.highlight::
gitweb.patches::
gitweb.pickaxe::
gitweb.remote_heads::
-gitweb.showsizes::
+gitweb.showSizes::
gitweb.snapshot::
See linkgit:gitweb.conf[5] for description.
@@ -1383,15 +1383,15 @@ gpg.program::
signed, and the program is expected to send the result to its
standard output.
-gui.commitmsgwidth::
+gui.commitMsgWidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
-gui.diffcontext::
+gui.diffContext::
Specifies how many context lines should be used in calls to diff
made by the linkgit:git-gui[1]. The default is "5".
-gui.displayuntracked::
+gui.displayUntracked::
Determines if linkgit::git-gui[1] shows untracked files
in the file list. The default is "true".
@@ -1403,39 +1403,39 @@ gui.encoding::
If this option is not set, the tools default to the
locale encoding.
-gui.matchtrackingbranch::
+gui.matchTrackingBranch::
Determines if new branches created with linkgit:git-gui[1] should
default to tracking remote branches with matching names or
not. Default: "false".
-gui.newbranchtemplate::
+gui.newBranchTemplate::
Is used as suggested name when creating new branches using the
linkgit:git-gui[1].
-gui.pruneduringfetch::
+gui.pruneDuringFetch::
"true" if linkgit:git-gui[1] should prune remote-tracking branches when
performing a fetch. The default value is "false".
-gui.trustmtime::
+gui.trustMTime::
Determines if linkgit:git-gui[1] should trust the file modification
timestamp or not. By default the timestamps are not trusted.
-gui.spellingdictionary::
+gui.spellingDictionary::
Specifies the dictionary used for spell checking commit messages in
the linkgit:git-gui[1]. When set to "none" spell checking is turned
off.
-gui.fastcopyblame::
+gui.fastCopyBlame::
If true, 'git gui blame' uses `-C` instead of `-C -C` for original
location detection. It makes blame significantly faster on huge
repositories at the expense of less thorough copy detection.
-gui.copyblamethreshold::
+gui.copyBlameThreshold::
Specifies the threshold to use in 'git gui blame' original location
detection, measured in alphanumeric characters. See the
linkgit:git-blame[1] manual for more information on copy detection.
-gui.blamehistoryctx::
+gui.blameHistoryCTX::
Specifies the radius of history context in days to show in
linkgit:gitk[1] for the selected commit, when the `Show History
Context` menu item is invoked from 'git gui blame'. If this
@@ -1450,22 +1450,22 @@ guitool.<name>.cmd::
'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
the head is detached, 'CUR_BRANCH' is empty).
-guitool.<name>.needsfile::
+guitool.<name>.needsFile::
Run the tool only if a diff is selected in the GUI. It guarantees
that 'FILENAME' is not empty.
-guitool.<name>.noconsole::
+guitool.<name>.noConsole::
Run the command silently, without creating a window to display its
output.
-guitool.<name>.norescan::
+guitool.<name>.noRescan::
Don't rescan the working directory for changes after the tool
finishes execution.
guitool.<name>.confirm::
Show a confirmation dialog before actually running the tool.
-guitool.<name>.argprompt::
+guitool.<name>.argPrompt::
Request a string argument from the user, and pass it to the tool
through the 'ARGS' environment variable. Since requesting an
argument implies confirmation, the 'confirm' option has no effect
@@ -1473,12 +1473,12 @@ guitool.<name>.argprompt::
the dialog uses a built-in generic prompt; otherwise the exact
value of the variable is used.
-guitool.<name>.revprompt::
+guitool.<name>.revPrompt::
Request a single valid revision from the user, and set the
'REVISION' environment variable. In other aspects this option
is similar to 'argprompt', and can be used together with it.
-guitool.<name>.revunmerged::
+guitool.<name>.revUnmerged::
Show only unmerged branches in the 'revprompt' subdialog.
This is useful for tools similar to merge or rebase, but not
for things like checkout or reset.
@@ -1501,7 +1501,7 @@ help.format::
Values 'man', 'info', 'web' and 'html' are supported. 'man' is
the default. 'web' and 'html' are the same.
-help.autocorrect::
+help.autoCorrect::
Automatically correct and execute mistyped commands after
waiting for the given number of deciseconds (0.1 sec). If more
than one command can be deduced from the entered text, nothing
@@ -1510,7 +1510,7 @@ help.autocorrect::
value is 0 - the command will be just shown but not executed.
This is the default.
-help.htmlpath::
+help.htmlPath::
Specify the path where the HTML documentation resides. File system paths
and URLs are supported. HTML pages will be prefixed with this path when
help is displayed in the 'web' format. This defaults to the documentation
@@ -1522,7 +1522,7 @@ http.proxy::
`curl(1)`). This can be overridden on a per-remote basis; see
remote.<name>.proxy
-http.cookiefile::
+http.cookieFile::
File containing previously stored cookie lines which should be used
in the Git http session, if they match the server. The file format
of the file to read cookies from should be plain HTTP headers or
@@ -1530,7 +1530,7 @@ http.cookiefile::
NOTE that the file specified with http.cookiefile is only used as
input unless http.saveCookies is set.
-http.savecookies::
+http.saveCookies::
If set, store cookies received during requests to the file specified by
http.cookiefile. Has no effect if http.cookiefile is unset.
@@ -1603,7 +1603,7 @@ http.noEPSV::
support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
environment variable. Default is false (curl will use EPSV).
-http.useragent::
+http.userAgent::
The HTTP USER_AGENT string presented to an HTTP server. The default
value represents the version of the client Git such as git/1.7.1.
This option allows you to override this value to a more common value
@@ -1676,7 +1676,7 @@ index.version::
Specify the version with which new index files should be
initialized. This does not affect existing repositories.
-init.templatedir::
+init.templateDir::
Specify the directory from which templates will be copied.
(See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
@@ -1692,7 +1692,7 @@ instaweb.local::
If true the web server started by linkgit:git-instaweb[1] will
be bound to the local IP (127.0.0.1).
-instaweb.modulepath::
+instaweb.modulePath::
The default module path for linkgit:git-instaweb[1] to use
instead of /usr/lib/apache2/modules. Only used if httpd
is Apache.
@@ -1701,7 +1701,7 @@ instaweb.port::
The port number to bind the gitweb httpd to. See
linkgit:git-instaweb[1].
-interactive.singlekey::
+interactive.singleKey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
Currently this is used by the `--patch` mode of
@@ -1729,7 +1729,7 @@ log.decorate::
specified, the full ref name (including prefix) will be printed.
This is the same as the log commands '--decorate' option.
-log.showroot::
+log.showRoot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
@@ -1966,7 +1966,7 @@ pack.useBitmaps::
true. You should not generally need to turn this off unless
you are debugging pack bitmaps.
-pack.writebitmaps (deprecated)::
+pack.writeBitmaps (deprecated)::
This is a deprecated synonym for `repack.writeBitmaps`.
pack.writeBitmapHashCache::
@@ -2089,10 +2089,10 @@ rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase. False by default.
-rebase.autosquash::
+rebase.autoSquash::
If set to true enable '--autosquash' option by default.
-rebase.autostash::
+rebase.autoStash::
When set to true, automatically create a temporary stash
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
@@ -2100,23 +2100,23 @@ rebase.autostash::
successful rebase might result in non-trivial conflicts.
Defaults to false.
-receive.advertiseatomic::
+receive.advertiseAtomic::
By default, git-receive-pack will advertise the atomic push
capability to its clients. If you don't want to this capability
to be advertised, set this variable to false.
-receive.autogc::
+receive.autoGC::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
it by setting this variable to false.
-receive.certnonceseed::
+receive.certNonceSeed::
By setting this variable to a string, `git receive-pack`
will accept a `git push --signed` and verifies it by using
a "nonce" protected by HMAC using this string as a secret
key.
-receive.certnonceslop::
+receive.certNonceSlop::
When a `git push --signed` sent a push certificate with a
"nonce" that was issued by a receive-pack serving the same
repository within this many seconds, export the "nonce"
@@ -2180,7 +2180,7 @@ receive.denyNonFastForwards::
even if that push is forced. This configuration variable is
set when initializing a shared repository.
-receive.hiderefs::
+receive.hideRefs::
String(s) `receive-pack` uses to decide which refs to omit
from its initial advertisement. Use more than one
definitions to specify multiple prefix strings. A ref that
@@ -2189,15 +2189,15 @@ receive.hiderefs::
push`, and an attempt to update or delete a hidden ref by
`git push` is rejected.
-receive.updateserverinfo::
+receive.updateServerInfo::
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
-receive.shallowupdate::
+receive.shallowUpdate::
If set to true, .git/shallow can be updated when new refs
require new shallow roots. Otherwise those refs are rejected.
-remote.pushdefault::
+remote.pushDefault::
The remote to push to by default. Overrides
`branch.<name>.remote` for all branches, and is overridden by
`branch.<name>.pushremote` for specific branches.
@@ -2206,7 +2206,7 @@ remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
-remote.<name>.pushurl::
+remote.<name>.pushURL::
The push URL of a remote repository. See linkgit:git-push[1].
remote.<name>.proxy::
@@ -2244,7 +2244,7 @@ remote.<name>.uploadpack::
The default program to execute on the remote side when fetching. See
option \--upload-pack of linkgit:git-fetch-pack[1].
-remote.<name>.tagopt::
+remote.<name>.tagOpt::
Setting this value to \--no-tags disables automatic tag following when
fetching from remote <name>. Setting it to \--tags will fetch every
tag from remote <name>, even if they are not reachable from remote
@@ -2266,7 +2266,7 @@ remotes.<group>::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
-repack.usedeltabaseoffset::
+repack.useDeltaBaseOffset::
By default, linkgit:git-repack[1] creates packs that use
delta-base offset. If you need to share your repository with
Git older than version 1.4.4, either directly or via a dumb
@@ -2289,7 +2289,7 @@ repack.writeBitmaps::
space and extra time spent on the initial repack. Defaults to
false.
-rerere.autoupdate::
+rerere.autoUpdate::
When set to true, `git-rerere` updates the index with the
resulting contents after it cleanly resolves conflicts using
previously recorded resolution. Defaults to false.
@@ -2308,14 +2308,14 @@ sendemail.identity::
values in the 'sendemail' section. The default identity is
the value of 'sendemail.identity'.
-sendemail.smtpencryption::
+sendemail.smtpEncryption::
See linkgit:git-send-email[1] for description. Note that this
setting is not subject to the 'identity' mechanism.
-sendemail.smtpssl (deprecated)::
+sendemail.smtpSSL (deprecated)::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
-sendemail.smtpsslcertpath::
+sendemail.smtpSslCertPath::
Path to ca-certificates (either a directory or a single file).
Set it to an empty string to disable certificate verification.
@@ -2325,34 +2325,34 @@ sendemail.<identity>.*::
identity is selected, through command-line or
'sendemail.identity'.
-sendemail.aliasesfile::
-sendemail.aliasfiletype::
+sendemail.aliasesFile::
+sendemail.aliasFileType::
sendemail.annotate::
sendemail.bcc::
sendemail.cc::
-sendemail.cccmd::
-sendemail.chainreplyto::
+sendemail.ccCmd::
+sendemail.chainReplyTo::
sendemail.confirm::
-sendemail.envelopesender::
+sendemail.envelopeSender::
sendemail.from::
-sendemail.multiedit::
-sendemail.signedoffbycc::
-sendemail.smtppass::
-sendemail.suppresscc::
-sendemail.suppressfrom::
+sendemail.multiEdit::
+sendemail.signedOffByCC::
+sendemail.smtpPass::
+sendemail.suppressCC::
+sendemail.suppressFrom::
sendemail.to::
-sendemail.smtpdomain::
-sendemail.smtpserver::
-sendemail.smtpserverport::
-sendemail.smtpserveroption::
-sendemail.smtpuser::
+sendemail.smtpDomain::
+sendemail.smtpServer::
+sendemail.smtpServerPort::
+sendemail.smtpServerOption::
+sendemail.smtpUser::
sendemail.thread::
-sendemail.transferencoding::
+sendemail.transferEncoding::
sendemail.validate::
sendemail.xmailer::
See linkgit:git-send-email[1] for description.
-sendemail.signedoffcc (deprecated)::
+sendemail.signedOffCC (deprecated)::
Deprecated alias for 'sendemail.signedoffbycc'.
showbranch.default::
@@ -2399,7 +2399,7 @@ If this variable is not specified, it defaults to 'normal'.
This variable can be overridden with the -u|--untracked-files option
of linkgit:git-status[1] and linkgit:git-commit[1].
-status.submodulesummary::
+status.submoduleSummary::
Defaults to false.
If this is set to a non zero number or true (identical to -1 or an
unlimited number), the submodule summary will be enabled and a
@@ -2474,7 +2474,7 @@ transfer.fsckObjects::
not set, the value of this variable is used instead.
Defaults to false.
-transfer.hiderefs::
+transfer.hideRefs::
This variable can be used to set both `receive.hiderefs`
and `uploadpack.hiderefs` at the same time to the same
values. See entries for these other variables.
@@ -2491,7 +2491,7 @@ uploadarchive.allowUnreachable::
linkgit:git-upload-archive[1] for more details. Defaults to
`false`.
-uploadpack.hiderefs::
+uploadpack.hideRefs::
String(s) `upload-pack` uses to decide which refs to omit
from its initial advertisement. Use more than one
definitions to specify multiple prefix strings. A ref that
@@ -2500,13 +2500,13 @@ uploadpack.hiderefs::
`git fetch`, etc. An attempt to fetch a hidden ref by `git
fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
-uploadpack.allowtipsha1inwant::
+uploadpack.allowTipSHA1InWant::
When `uploadpack.hiderefs` is in effect, allow `upload-pack`
to accept a fetch request that asks for an object at the tip
of a hidden ref (by default, such a request is rejected).
see also `uploadpack.hiderefs`.
-uploadpack.keepalive::
+uploadpack.keepAlive::
When `upload-pack` has started `pack-objects`, there may be a
quiet period while `pack-objects` prepares the pack. Normally
it would output progress information, but if `--quiet` was used
@@ -2551,7 +2551,7 @@ user.name::
Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
environment variables. See linkgit:git-commit-tree[1].
-user.signingkey::
+user.signingKey::
If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
key you want it to automatically when creating a signed tag or
commit, you can override the default selection with this variable.
--
2.3.0.rc1.137.g477eb31
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html