The to-do list commands `squash` and `fixup` apply the changes
introduced by the named commit to the tree but instead of creating
a new commit on top of the current head it replaces the previous
commit with a new commit that records the updated tree. If the
result is an empty commit git-rebase stops with the error message
You asked to amend the most recent commit, but doing so would make
it empty. You can repeat your command with --allow-empty, or you can
remove the commit entirely with "git reset HEAD^".
This message is not very helpful because neither does git-rebase
support an option `--allow-empty` nor does the messages say how to
resume the rebase. Firstly, change the error message to
The squash result is empty and --keep-empty was not specified.
You can remove the squash commit now with
git reset HEAD^
Once you are done, run
git rebase --continue
If the user wishes to squash a sequence of commits into one
commit, f. i.
pick A
squash Revert "A"
squash A'
, it does not matter for the end result that the first squash
result, or any sub-sequence in general, is going to be empty. The
squash message is not affected at all by which commits are created
and only the commit created by the last line in the sequence will
end up in the final history. Secondly, print the error message
only if the whole squash sequence produced an empty commit.
Lastly, since an empty squash commit is not a failure to rewrite
the history as planned, issue the message above as a mere warning
and interrupt the rebase with the return value zero. The
interruption should be considered as a notification with the
chance to undo it on the spot. Specifying the `--keep-empty`
option tells git-rebase to keep empty squash commits in the
rebased history without notification.
Add tests.
Reported-by: Peter Krefting <peter@xxxxxxxxxxxxxxxx>
Signed-off-by: Fabian Ruch <bafain@xxxxxxxxx>
---
git-rebase--interactive.sh | 20 +++++++++++---
t/t3404-rebase-interactive.sh | 62 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 79 insertions(+), 3 deletions(-)
diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh
index 3222bf6..ada340c 100644
--- a/git-rebase--interactive.sh
+++ b/git-rebase--interactive.sh
@@ -549,7 +549,7 @@ do_next () {
squash|s|fixup|f)
# This is an intermediate commit; its message will only be
# used in case of trouble. So use the long version:
- do_with_author output git commit --allow-empty-message \
+ do_with_author output git commit --allow-empty-message --allow-empty \
--amend --no-verify -F "$squash_msg" \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
die_failed_squash $sha1 "$rest"
@@ -558,18 +558,32 @@ do_next () {
# This is the final command of this squash/fixup group
if test -f "$fixup_msg"
then
- do_with_author git commit --allow-empty-message \
+ do_with_author git commit --allow-empty-message --allow-empty \
--amend --no-verify -F "$fixup_msg" \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
die_failed_squash $sha1 "$rest"
else
cp "$squash_msg" "$GIT_DIR"/SQUASH_MSG || exit
rm -f "$GIT_DIR"/MERGE_MSG
- do_with_author git commit --amend --no-verify -F "$GIT_DIR"/SQUASH_MSG -e \
+ do_with_author git commit --allow-empty --amend --no-verify -F "$GIT_DIR"/SQUASH_MSG -e \
${gpg_sign_opt:+"$gpg_sign_opt"} ||
die_failed_squash $sha1 "$rest"
fi
rm -f "$squash_msg" "$fixup_msg"
+ if test -z "$keep_empty" && is_empty_commit HEAD
+ then
+ echo "$sha1" >"$state_dir"/stopped-sha
+ warn "The squash result is empty and --keep-empty was not specified."
+ warn
+ warn "You can remove the squash commit now with"
+ warn
+ warn " git reset HEAD^"
+ warn
+ warn "Once you are done, run"
+ warn
+ warn " git rebase --continue"
+ exit 0
+ fi
;;
esac
record_in_rewritten $sha1
diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
index 9c71835..a95cb2a 100755
--- a/t/t3404-rebase-interactive.sh
+++ b/t/t3404-rebase-interactive.sh
@@ -237,6 +237,68 @@ test_expect_success 'retain authorship' '
git show HEAD | grep "^Author: Twerp Snog"
'
+test_expect_success 'setup squash/fixup reverted and fixed feature' '
+ git checkout -b reverted-feature master &&
+ test_commit feature &&
+ git revert feature &&
+ git checkout -b fixed-feature reverted-feature &&
+ test_commit featurev2
+'
+
+test_expect_success 'fixup fixed feature (empty interim commit)' '
+ git checkout -b fixup-fixed-feature fixed-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 fixup 2 fixup 3" git rebase -i master &&
+ git log --oneline master.. >actual &&
+ test_line_count = 1 actual &&
+ git diff --exit-code featurev2
+'
+
+test_expect_success 'squash fixed feature (empty interim commit)' '
+ git checkout -b squash-fixed-feature fixed-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 squash 2 squash 3" git rebase -i master &&
+ git log --oneline master.. >actual &&
+ test_line_count = 1 actual &&
+ git diff --exit-code featurev2
+'
+
+test_expect_success 'fixup reverted feature (empty final commit)' '
+ git checkout -b fixup-reverted-feature reverted-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 fixup 2" git rebase -i master &&
+ git reset HEAD^ &&
+ git rebase --continue &&
+ test_cmp_rev master HEAD
+'
+
+test_expect_success 'squash reverted feature (empty final commit)' '
+ git checkout -b squash-reverted-feature reverted-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 squash 2" git rebase -i master &&
+ git reset HEAD^ &&
+ git rebase --continue &&
+ test_cmp_rev master HEAD
+'
+
+test_expect_success 'fixup reverted feature (empty final commit with --keep-empty)' '
+ git checkout -b fixup-keep-reverted-feature reverted-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 fixup 2" git rebase -i --keep-empty master &&
+ git log --oneline master.. >actual &&
+ test_line_count = 1 actual &&
+ git diff --exit-code master
+'
+
+test_expect_success 'squash reverted feature (empty final commit with --keep-empty)' '
+ git checkout -b squash-keep-reverted-feature reverted-feature &&
+ set_fake_editor &&
+ FAKE_LINES="1 squash 2" git rebase -i --keep-empty master &&
+ git log --oneline master.. >actual &&
+ test_line_count = 1 actual &&
+ git diff --exit-code master
+'
+
test_expect_success 'squash' '
git reset --hard twerp &&
echo B > file7 &&
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html