On Wed, Aug 6, 2014 at 7:59 PM, Fabian Ruch <bafain@xxxxxxxxx> wrote:
> The to-do list commands `squash` and `fixup` apply the changes
> introduced by the named commit to the tree but instead of creating
> a new commit on top of the current head it replaces the previous
> commit with a new commit that records the updated tree. If the
> result is an empty commit git-rebase stops with the error message
>
> You asked to amend the most recent commit, but doing so would make
> it empty. You can repeat your command with --allow-empty, or you can
> remove the commit entirely with "git reset HEAD^".
>
> This message is not very helpful because neither does git-rebase
> support an option `--allow-empty` nor does the messages say how to
> resume the rebase. Firstly, change the error message to
>
> The squash result is empty and --keep-empty was not specified.
>
> You can remove the squash commit now with
>
> git reset HEAD^
>
> Once you are down, run
I guess you meant: s/down/done
Same issue with the actually message in the code (below).
> git rebase --continue
>
> If the user wishes to squash a sequence of commits into one
> commit, f. i.
>
> pick A
> squash Revert "A"
> squash A'
>
> , it does not matter for the end result that the first squash
> result, or any sub-sequence in general, is going to be empty. The
> squash message is not affected at all by which commits are created
> and only the commit created by the last line in the sequence will
> end up in the final history. Secondly, print the error message
> only if the whole squash sequence produced an empty commit.
>
> Lastly, since an empty squash commit is not a failure to rewrite
> the history as planned, issue the message above as a mere warning
> and interrupt the rebase with the return value zero. The
> interruption should be considered as a notification with the
> chance to undo it on the spot. Specifying the `--keep-empty`
> option tells git-rebase to keep empty squash commits in the
> rebased history without notification.
>
> Add tests.
>
> Reported-by: Peter Krefting <peter@xxxxxxxxxxxxxxxx>
> Signed-off-by: Fabian Ruch <bafain@xxxxxxxxx>
> ---
> Hi,
>
> Peter Krefting is cc'd as the author of the bug report "Confusing
> error message in rebase when commit becomes empty" discussed on the
> mailing list in June. Phil Hord and Jeff King both participated in
> the problem discussion which ended with two proposals by Jeff.
>
> Jeff King writes:
>> 1. Always keep such empty commits. A user who is surprised by them
>> being empty can then revisit them. Or drop them by doing another
>> rebase without --keep-empty.
>>
>> 2. Notice ourselves that the end-result of the whole squash is an
>> empty commit, and stop to let the user deal with it.
>
> This patch chooses the second alternative. Either way seems OK. The
> crucial consensus of the discussion was to silently throw away empty
> interim commits.
>
> Fabian
>
> git-rebase--interactive.sh | 20 +++++++++++---
> t/t3404-rebase-interactive.sh | 62 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 79 insertions(+), 3 deletions(-)
>
> diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh
> index 3222bf6..8820eac 100644
> --- a/git-rebase--interactive.sh
> +++ b/git-rebase--interactive.sh
> @@ -549,7 +549,7 @@ do_next () {
> squash|s|fixup|f)
> # This is an intermediate commit; its message will only be
> # used in case of trouble. So use the long version:
> - do_with_author output git commit --allow-empty-message \
> + do_with_author output git commit --allow-empty-message --allow-empty \
> --amend --no-verify -F "$squash_msg" \
> ${gpg_sign_opt:+"$gpg_sign_opt"} ||
> die_failed_squash $sha1 "$rest"
> @@ -558,18 +558,32 @@ do_next () {
> # This is the final command of this squash/fixup group
> if test -f "$fixup_msg"
> then
> - do_with_author git commit --allow-empty-message \
> + do_with_author git commit --allow-empty-message --allow-empty \
> --amend --no-verify -F "$fixup_msg" \
> ${gpg_sign_opt:+"$gpg_sign_opt"} ||
> die_failed_squash $sha1 "$rest"
> else
> cp "$squash_msg" "$GIT_DIR"/SQUASH_MSG || exit
> rm -f "$GIT_DIR"/MERGE_MSG
> - do_with_author git commit --amend --no-verify -F "$GIT_DIR"/SQUASH_MSG -e \
> + do_with_author git commit --allow-empty --amend --no-verify -F "$GIT_DIR"/SQUASH_MSG -e \
> ${gpg_sign_opt:+"$gpg_sign_opt"} ||
> die_failed_squash $sha1 "$rest"
> fi
> rm -f "$squash_msg" "$fixup_msg"
> + if test -z "$keep_empty" && is_empty_commit HEAD
> + then
> + echo "$sha1" >"$state_dir"/stopped-sha
> + warn "The squash result is empty and --keep-empty was not specified."
> + warn
> + warn "You can remove the squash commit now with"
> + warn
> + warn " git reset HEAD^"
> + warn
> + warn "Once you are down, run"
s/down/done/
> + warn
> + warn " git rebase --continue"
> + exit 0
> + fi
> ;;
> esac
> record_in_rewritten $sha1
> diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
> index 9c71835..a95cb2a 100755
> --- a/t/t3404-rebase-interactive.sh
> +++ b/t/t3404-rebase-interactive.sh
> @@ -237,6 +237,68 @@ test_expect_success 'retain authorship' '
> git show HEAD | grep "^Author: Twerp Snog"
> '
>
> +test_expect_success 'setup squash/fixup reverted and fixed feature' '
> + git checkout -b reverted-feature master &&
> + test_commit feature &&
> + git revert feature &&
> + git checkout -b fixed-feature reverted-feature &&
> + test_commit featurev2
> +'
> +
> +test_expect_success 'fixup fixed feature (empty interim commit)' '
> + git checkout -b fixup-fixed-feature fixed-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 fixup 2 fixup 3" git rebase -i master &&
> + git log --oneline master.. >actual &&
> + test_line_count = 1 actual &&
> + git diff --exit-code featurev2
> +'
> +
> +test_expect_success 'squash fixed feature (empty interim commit)' '
> + git checkout -b squash-fixed-feature fixed-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 squash 2 squash 3" git rebase -i master &&
> + git log --oneline master.. >actual &&
> + test_line_count = 1 actual &&
> + git diff --exit-code featurev2
> +'
> +
> +test_expect_success 'fixup reverted feature (empty final commit)' '
> + git checkout -b fixup-reverted-feature reverted-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 fixup 2" git rebase -i master &&
> + git reset HEAD^ &&
> + git rebase --continue &&
> + test_cmp_rev master HEAD
> +'
> +
> +test_expect_success 'squash reverted feature (empty final commit)' '
> + git checkout -b squash-reverted-feature reverted-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 squash 2" git rebase -i master &&
> + git reset HEAD^ &&
> + git rebase --continue &&
> + test_cmp_rev master HEAD
> +'
> +
> +test_expect_success 'fixup reverted feature (empty final commit with --keep-empty)' '
> + git checkout -b fixup-keep-reverted-feature reverted-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 fixup 2" git rebase -i --keep-empty master &&
> + git log --oneline master.. >actual &&
> + test_line_count = 1 actual &&
> + git diff --exit-code master
> +'
> +
> +test_expect_success 'squash reverted feature (empty final commit with --keep-empty)' '
> + git checkout -b squash-keep-reverted-feature reverted-feature &&
> + set_fake_editor &&
> + FAKE_LINES="1 squash 2" git rebase -i --keep-empty master &&
> + git log --oneline master.. >actual &&
> + test_line_count = 1 actual &&
> + git diff --exit-code master
> +'
> +
> test_expect_success 'squash' '
> git reset --hard twerp &&
> echo B > file7 &&
> --
> 2.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe git" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html