Re: [PATCH 4/4] t: branch: improve test rollback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Felipe Contreras <felipe.contreras@xxxxxxxxx> writes:

> After every test the environment should be as close as to how it was
> before as possible.
>
> Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx>
> ---

Very good in general; a few points (not "the patch breaks things",
but more like "tests after the patch are still depending on the
previous state") below, though.

>  t/t3200-branch.sh | 71 +++++++++++++++++++++++++++----------------------------
>  1 file changed, 35 insertions(+), 36 deletions(-)
>
> diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
> index d85306f..3d4f634 100755
> --- a/t/t3200-branch.sh
> +++ b/t/t3200-branch.sh
> @@ -328,7 +328,7 @@ test_expect_success 'tracking setup fails on non-matching refspec' '
>  '
>  
>  test_expect_success 'test tracking setup via config' '
> -	git config branch.autosetupmerge true &&
> +	test_config branch.autosetupmerge true &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -338,20 +338,18 @@ test_expect_success 'test tracking setup via config' '
>  '
>  
>  test_expect_success 'test overriding tracking setup via --no-track' '
> -	git config branch.autosetupmerge true &&
> +	test_config branch.autosetupmerge true &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
>  	git branch --no-track my2 local/master &&
> -	git config branch.autosetupmerge false &&
>  	! test "$(git config branch.my2.remote)" = local &&
>  	! test "$(git config branch.my2.merge)" = refs/heads/master
>  '
>  
>  test_expect_success 'no tracking without .fetch entries' '
> -	git config branch.autosetupmerge true &&
> +	test_config branch.autosetupmerge true &&
>  	git branch my6 s &&
> -	git config branch.autosetupmerge false &&
>  	test -z "$(git config branch.my6.remote)" &&
>  	test -z "$(git config branch.my6.merge)"
>  '

The four tests after this one used to expect to start with
branch.autosetupmerge explicitly set to false, but this change
leaves the variable unset---as a side effect we start testing a
different thing.  As long as we do not introduce a bug that allows
an exlicit branch.autosetupmerge=false defeat --track on the command
line, this side effect does not hurt, but I think the 'test tracking
setup via --track but deeper' was the only test that checks this
interaction between 'false in config, --track on the command line'
combination.

> @@ -386,9 +384,8 @@ test_expect_success 'test --track without .fetch entries' '
>  '
>  
>  test_expect_success 'branch from non-branch HEAD w/autosetupmerge=always' '
> -	git config branch.autosetupmerge always &&
> -	git branch my9 HEAD^ &&
> -	git config branch.autosetupmerge false
> +	test_config branch.autosetupmerge always &&
> +	git branch my9 HEAD^
>  '

Likewise for three subsequent tests but what they test are not
primarily whether tracking is done, so it does not matter as much as
the previous.

>  test_expect_success 'branch from non-branch HEAD w/--track causes failure' '
> @@ -405,9 +402,9 @@ test_expect_success '--set-upstream-to fails on multiple branches' '
>  '
>  
>  test_expect_success '--set-upstream-to fails on detached HEAD' '
> +	test_when_finished "git checkout -" &&
>  	git checkout HEAD^{} &&
> -	test_must_fail git branch --set-upstream-to master &&
> -	git checkout -
> +	test_must_fail git branch --set-upstream-to master
>  '
>  
>  test_expect_success '--set-upstream-to fails on a missing dst branch' '
> @@ -459,9 +456,9 @@ test_expect_success '--unset-upstream should fail on multiple branches' '
>  '
>  
>  test_expect_success '--unset-upstream should fail on detached HEAD' '
> +	test_when_finished "git checkout -" &&
>  	git checkout HEAD^{} &&
> -	test_must_fail git branch --unset-upstream &&
> -	git checkout -
> +	test_must_fail git branch --unset-upstream
>  '
>  
>  test_expect_success 'test --unset-upstream on a particular branch' '
> @@ -540,7 +537,8 @@ test_expect_success 'checkout -b with -l makes reflog when core.logAllRefUpdates
>  '
>  
>  test_expect_success 'avoid ambiguous track' '
> -	git config branch.autosetupmerge true &&
> +	test_when_finished "git remote rm ambi1 && git remote rm ambi2" &&
> +	test_config branch.autosetupmerge true &&
>  	git config remote.ambi1.url lalala &&
>  	git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master &&
>  	git config remote.ambi2.url lilili &&
> @@ -552,7 +550,7 @@ test_expect_success 'avoid ambiguous track' '
>  test_expect_success 'autosetuprebase local on a tracked local branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase local &&
> +	test_config branch.autosetuprebase local &&
>  	(git show-ref -q refs/remotes/local/o || git fetch local) &&
>  	git branch mybase &&
>  	git branch --track myr1 mybase &&
> @@ -564,7 +562,7 @@ test_expect_success 'autosetuprebase local on a tracked local branch' '
>  test_expect_success 'autosetuprebase always on a tracked local branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase always &&
> +	test_config branch.autosetuprebase always &&
>  	(git show-ref -q refs/remotes/local/o || git fetch local) &&
>  	git branch mybase2 &&
>  	git branch --track myr2 mybase &&
> @@ -576,7 +574,7 @@ test_expect_success 'autosetuprebase always on a tracked local branch' '
>  test_expect_success 'autosetuprebase remote on a tracked local branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase remote &&
> +	test_config branch.autosetuprebase remote &&
>  	(git show-ref -q refs/remotes/local/o || git fetch local) &&
>  	git branch mybase3 &&
>  	git branch --track myr3 mybase2 &&
> @@ -588,7 +586,7 @@ test_expect_success 'autosetuprebase remote on a tracked local branch' '
>  test_expect_success 'autosetuprebase never on a tracked local branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase never &&
> +	test_config branch.autosetuprebase never &&
>  	(git show-ref -q refs/remotes/local/o || git fetch local) &&
>  	git branch mybase4 &&
>  	git branch --track myr4 mybase2 &&
> @@ -600,7 +598,7 @@ test_expect_success 'autosetuprebase never on a tracked local branch' '
>  test_expect_success 'autosetuprebase local on a tracked remote branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase local &&
> +	test_config branch.autosetuprebase local &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
>  	git branch --track myr5 local/master &&
>  	test "$(git config branch.myr5.remote)" = local &&
> @@ -611,7 +609,7 @@ test_expect_success 'autosetuprebase local on a tracked remote branch' '
>  test_expect_success 'autosetuprebase never on a tracked remote branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase never &&
> +	test_config branch.autosetuprebase never &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
>  	git branch --track myr6 local/master &&
>  	test "$(git config branch.myr6.remote)" = local &&
> @@ -622,7 +620,7 @@ test_expect_success 'autosetuprebase never on a tracked remote branch' '
>  test_expect_success 'autosetuprebase remote on a tracked remote branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase remote &&
> +	test_config branch.autosetuprebase remote &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
>  	git branch --track myr7 local/master &&
>  	test "$(git config branch.myr7.remote)" = local &&
> @@ -633,7 +631,7 @@ test_expect_success 'autosetuprebase remote on a tracked remote branch' '
>  test_expect_success 'autosetuprebase always on a tracked remote branch' '
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
> -	git config branch.autosetuprebase remote &&
> +	test_config branch.autosetuprebase remote &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
>  	git branch --track myr8 local/master &&
>  	test "$(git config branch.myr8.remote)" = local &&
> @@ -642,7 +640,7 @@ test_expect_success 'autosetuprebase always on a tracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase unconfigured on a tracked remote branch' '
> -	git config --unset branch.autosetuprebase &&
> +	test_unconfig branch.autosetuprebase &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -684,7 +682,7 @@ test_expect_success 'autosetuprebase unconfigured on untracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase never on an untracked local branch' '
> -	git config branch.autosetuprebase never &&
> +	test_config branch.autosetuprebase never &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -695,7 +693,7 @@ test_expect_success 'autosetuprebase never on an untracked local branch' '
>  '
>  
>  test_expect_success 'autosetuprebase local on an untracked local branch' '
> -	git config branch.autosetuprebase local &&
> +	test_config branch.autosetuprebase local &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -706,7 +704,7 @@ test_expect_success 'autosetuprebase local on an untracked local branch' '
>  '
>  
>  test_expect_success 'autosetuprebase remote on an untracked local branch' '
> -	git config branch.autosetuprebase remote &&
> +	test_config branch.autosetuprebase remote &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -717,7 +715,7 @@ test_expect_success 'autosetuprebase remote on an untracked local branch' '
>  '
>  
>  test_expect_success 'autosetuprebase always on an untracked local branch' '
> -	git config branch.autosetuprebase always &&
> +	test_config branch.autosetuprebase always &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -728,7 +726,7 @@ test_expect_success 'autosetuprebase always on an untracked local branch' '
>  '
>  
>  test_expect_success 'autosetuprebase never on an untracked remote branch' '
> -	git config branch.autosetuprebase never &&
> +	test_config branch.autosetuprebase never &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -739,7 +737,7 @@ test_expect_success 'autosetuprebase never on an untracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase local on an untracked remote branch' '
> -	git config branch.autosetuprebase local &&
> +	test_config branch.autosetuprebase local &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -750,7 +748,7 @@ test_expect_success 'autosetuprebase local on an untracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase remote on an untracked remote branch' '
> -	git config branch.autosetuprebase remote &&
> +	test_config branch.autosetuprebase remote &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -761,7 +759,7 @@ test_expect_success 'autosetuprebase remote on an untracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase always on an untracked remote branch' '
> -	git config branch.autosetuprebase always &&
> +	test_config branch.autosetuprebase always &&
>  	git config remote.local.url . &&
>  	git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
>  	(git show-ref -q refs/remotes/local/master || git fetch local) &&
> @@ -772,8 +770,8 @@ test_expect_success 'autosetuprebase always on an untracked remote branch' '
>  '
>  
>  test_expect_success 'autosetuprebase always on detached HEAD' '
> -	git config branch.autosetupmerge always &&
> -	test_when_finished git checkout master &&
> +	test_when_finished "git checkout -" &&

I think the explicit 'master' was better.  We are not in the
business of checking @{-1} completion here, and depending on the
outcome of the "git checkout" in the test, "checkout -" will take us
to a different place, no?

> +	test_config branch.autosetupmerge always &&

This used to be propagated down, but now branch.autosetupmerge is
kept unset after this.  The tests after this one do not seem to
newly create branches that need auto-setup-merge, so I think this
change is very good.

>  	git checkout HEAD^0 &&
>  	git branch my11 &&
>  	test -z "$(git config branch.my11.remote)" &&
> @@ -781,15 +779,15 @@ test_expect_success 'autosetuprebase always on detached HEAD' '
>  '
>  
>  test_expect_success 'detect misconfigured autosetuprebase (bad value)' '
> -	git config branch.autosetuprebase garbage &&
> +	test_config branch.autosetuprebase garbage &&
>  	test_must_fail git branch
>  '
>  
>  test_expect_success 'detect misconfigured autosetuprebase (no value)' '
> -	git config --unset branch.autosetuprebase &&
> +	test_when_finished "test_unconfig branch.autosetuprebase" &&
> +	test_unconfig branch.autosetuprebase &&
>  	echo "[branch] autosetuprebase" >>.git/config &&
> -	test_must_fail git branch &&
> -	git config --unset branch.autosetuprebase
> +	test_must_fail git branch
>  '
>  
>  test_expect_success 'attempt to delete a branch without base and unmerged to HEAD' '
> @@ -856,6 +854,7 @@ test_expect_success 'detect typo in branch name when using --edit-description' '
>  '
>  
>  test_expect_success 'refuse --edit-description on unborn branch for now' '
> +	test_when_finished "git checkout -" &&

I am not sure if this is a good change.  Depending on the outcome of
the "git checkout" in the test (it may succeed and set @{-1} to the
branch we were on when we entered the test, or it may fail and leave
@{-1} to the branch before we were on when we entered the test),
this will take us to a different place, no?

>  	write_script editor <<-\EOF &&
>  		echo "New contents" >"$1"
>  	EOF
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]