Am 6/26/2013 12:19, schrieb Alexey Shumkin:
> One can set an alias
> $ git config alias.lg "log --graph --pretty=format:'%Cred%h%Creset
> -%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
> --abbrev-commit --date=local"
>
> to see the log as a pretty tree (like *gitk* but in a terminal).
>
> However, log messages written in an encoding i18n.commitEncoding which differs
> from terminal encoding are shown corrupted even when i18n.logOutputEncoding
> and terminal encoding are the same (e.g. log messages committed on a Cygwin box
> with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
>
> To simplify an example we can say the following two commands are expected
> to give the same output to a terminal:
>
> $ git log --oneline --no-color
> $ git log --pretty=format:'%h %s'
>
> However, the former pays attention to i18n.logOutputEncoding
> configuration, while the latter does not when it formats "%s".
>
> The same corruption is true for
> $ git diff --submodule=log
> and
> $ git rev-list --pretty=format:%s HEAD
> and
> $ git reset --hard
>
> This patch adds failing tests for the next patch that fixes them.
>
> Signed-off-by: Alexey Shumkin <Alex.Crezoff@xxxxxxxxx>
> diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh
> index 73ba5e8..6b62da2 100755
> --- a/t/t4205-log-pretty-formats.sh
> +++ b/t/t4205-log-pretty-formats.sh
...
> +commit_msg() {
> + # String "initial. initial" partly in German (translated with Google Translate),
> + # encoded in UTF-8, used as a commit log message below.
> + msg=$(printf "initial. anf\303\244nglich")
> + if test -n "$1"
> + then
> + msg=$(echo $msg | iconv -f utf-8 -t $1)
> + fi
> + if test -n "$2" -a -n "$3"
> + then
> + # cut string, replace cut part with two dots
> + # $2 - chars count from the beginning of the string
> + # $3 - "trailing" chars
> + # LC_ALL is set to make `sed` interpret "." as a UTF-8 char not a byte
> + # as it does with C locale
> + msg=$(echo $msg | LC_ALL=en_US.UTF-8 sed -e "s/^\(.\{$2\}\)$3/\1../")
This does not work as expected on Windows because sed ignores the .UTF-8
part of the locale specifier. (We don't even have en_US; we have de, but
with de.UTF-8 this doesn't work, either.)
I don't have an idea, yet, how to work it around.
> + fi
> + echo $msg
> +}
> -test_expect_success 'left alignment formatting with mtrunc' '
> - git log --pretty="format:%<(10,mtrunc)%s" >actual &&
> +test_expect_failure 'left alignment formatting with mtrunc' "
> + git log --pretty='format:%<(10,mtrunc)%s' >actual &&
> # complete the incomplete line at the end
> echo >>actual &&
> qz_to_tab_space <<\EOF >expected &&
> mess.. two
> mess.. one
> add bar Z
> -initial Z
> +$(commit_msg "" "4" ".\{11\}")
> EOF
> test_cmp expected actual
> -'
> +"
This is the failing test case.
BTW, if you re-roll, there would be fewer changes needed if you kept the
test code single-quoted, but changed <<\EOF to <<EOF where needed.
> diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh
> index cc1008d..c66a07f 100755
> --- a/t/t6006-rev-list-format.sh
> +++ b/t/t6006-rev-list-format.sh
...
> test_expect_success 'setup' '
> : >foo &&
> git add foo &&
> - git commit -m "added foo" &&
> + git config i18n.commitEncoding iso-8859-1 &&
Perhaps
test_config i18n.commitEncoding iso-8859-1 &&
Also, it is "iso-8869-1" here, but we see "iso8859-1" already used later.
It's probably wise to use that same encoding name everywhere because we
can be very sure that the latter is already understood on all supported
platforms.
> + git commit -m "$added_iso88591" &&
> head1=$(git rev-parse --verify HEAD) &&
> head1_short=$(git rev-parse --verify --short $head1) &&
> tree1=$(git rev-parse --verify HEAD:) &&
> tree1_short=$(git rev-parse --verify --short $tree1) &&
> - echo changed >foo &&
> - git commit -a -m "changed foo" &&
> + echo "$changed" > foo &&
> + git commit -a -m "$changed_iso88591" &&
> head2=$(git rev-parse --verify HEAD) &&
> head2_short=$(git rev-parse --verify --short $head2) &&
> tree2=$(git rev-parse --verify HEAD:) &&
> tree2_short=$(git rev-parse --verify --short $tree2)
> + git config --unset i18n.commitEncoding
> '
>
> -# usage: test_format name format_string <expected_output
> +# usage: test_format [failure] name format_string <expected_output
> test_format () {
> + must_fail=0
> + # if parameters count is more than 2 then test must fail
> + if test $# -gt 2
> + then
> + must_fail=1
> + # remove first parameter which is flag for test failure
> + shift
> + fi
> cat >expect.$1
> - test_expect_success "format $1" "
> - git rev-list --pretty=format:'$2' master >output.$1 &&
> - test_cmp expect.$1 output.$1
> - "
> + name="format $1"
> + command="git rev-list --pretty=format:'$2' master >output.$1 &&
> + test_cmp expect.$1 output.$1"
> + if test $must_fail -eq 1
> + then
> + test_expect_failure "$name" "$command"
> + else
> + test_expect_success "$name" "$command"
> + fi
> }
This function would be much shorter with the optional "failure" token as
$3 (untested):
test_format () {
cat >expect.$1
test_expect_${3:-success} "format $1" "
git rev-list --pretty=format:'$2' master >output.$1 &&
test_cmp expect.$1 output.$1
"
}
> test_expect_success 'setup complex body' '
> git config i18n.commitencoding iso8859-1 &&
> echo change2 >foo && git commit -a -F commit-msg &&
> head3=$(git rev-parse --verify HEAD) &&
> - head3_short=$(git rev-parse --short $head3)
> + head3_short=$(git rev-parse --short $head3) &&
> + # unset commit encoding config
> + # otherwise %e does not print encoding value
> + # and following test fails
I don't understand this comment. The test vector below already shows that
an encoding is printed. Why would this suddenly be different with the
updated tests?
Assuming that this change doesn't sweep a deeper problem under the rug,
it's better to use test_config a few lines earlier.
> + git config --unset i18n.commitEncoding
> +
> '
>
> test_format complex-encoding %e <<EOF
> commit $head3
> iso8859-1
This is the encoding that I mean.
> commit $head2
> +iso-8859-1
> commit $head1
> +iso-8859-1
> EOF
> diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh
> index 05dfb27..72e364e 100755
> --- a/t/t7102-reset.sh
> +++ b/t/t7102-reset.sh
> @@ -9,6 +9,17 @@ Documented tests for git reset'
>
> . ./test-lib.sh
>
> +commit_msg() {
> + # String "modify 2nd file (changed)" partly in German(translated with Google Translate),
> + # encoded in UTF-8, used as a commit log message below.
> + msg=$(printf "modify 2nd file (ge\303\244ndert)")
> + if test -n "$1"
> + then
> + msg=$(echo $msg | iconv -f utf-8 -t $1)
> + fi
> + echo $msg
> +}
If you wanted to, you could write this as
commit_msg () {
# String "modify 2nd file (changed)" partly in German
#(translated with Google Translate),
# encoded in UTF-8, used as a commit log message below.
printf "modify 2nd file (ge\303\244ndert)" |
if test -n "$1"
then
iconv -f utf-8 -t $1
else
cat
fi
}
but I'm not sure whether it's a lot better.
-- Hannes
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html