Re: [PATCH] run-command: encode signal death as a positive integer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 05.01.2013 15:49, schrieb Jeff King:
> On Sat, Jan 05, 2013 at 09:03:16AM -0500, Jeff King wrote:
> 
>> In fact, I really wonder if this code from wait_or_whine is actually
>> correct:
>>
>>   code = WTERMSIG(status);
>>   /*
>>    * This return value is chosen so that code & 0xff
>>    * mimics the exit code that a POSIX shell would report for
>>    * a program that died from this signal.
>>    */
>>   code -= 128;
> 
> After looking at it some more, it is correct, but I think we could make
> life slightly easier for callers. See the patch below.  I've tried to
> re-state the somewhat rambling argument from my previous email;
> hopefully it makes sense.
> 
> -- >8 --
> Subject: [PATCH] run-command: encode signal death as a positive integer
> 
> When a sub-command dies due to a signal, we encode the
> signal number into the numeric exit status as "signal -
> 128". This is easy to identify (versus a regular positive
> error code), and when cast to an unsigned integer (e.g., by
> feeding it to exit), matches what a POSIX shell would return
> when reporting a signal death in $? or through its own exit
> code.
> 
> So we have a negative value inside the code, but once it
> passes across an exit() barrier, it looks positive (and any
> code we receive from a sub-shell will have the positive
> form). E.g., death by SIGPIPE (signal 13) will look like
> -115 to us in inside git, but will end up as 141 when we
> call exit() with it. And a program killed by SIGPIPE but run
> via the shell will come to us with an exit code of 141.
> 
> Unfortunately, this means that when the "use_shell" option
> is set, we need to be on the lookout for _both_ forms. We
> might or might not have actually invoked the shell (because
> we optimize out some useless shell calls). If we didn't invoke
> the shell, we will will see the sub-process's signal death
> directly, and run-command converts it into a negative value.
> But if we did invoke the shell, we will see the shell's
> 128+signal exit status. To be thorough, we would need to
> check both, or cast the value to an unsigned char (after
> checking that it is not -1, which is a magic error value).
> 
> Fortunately, most callsites do not care at all whether the
> exit was from a code or from a signal; they merely check for
> a non-zero status, and sometimes propagate the error via
> exit(). But for the callers that do care, we can make life
> slightly easier by just using the consistent positive form.
> 
> This actually fixes two minor bugs:
> 
>   1. In launch_editor, we check whether the editor died from
>      SIGINT or SIGQUIT. But we checked only the negative
>      form, meaning that we would fail to notice a signal
>      death exit code which was propagated through the shell.
> 
>   2. In handle_alias, we assume that a negative return value
>      from run_command means that errno tells us something
>      interesting (like a fork failure, or ENOENT).
>      Otherwise, we simply propagate the exit code. Negative
>      signal death codes confuse us, and we print a useless
>      "unable to run alias 'foo': Success" message. By
>      encoding signal deaths using the positive form, the
>      existing code just propagates it as it would a normal
>      non-zero exit code.
> 
> The downside is that callers of run_command can no longer
> differentiate between a signal received directly by the
> sub-process, and one propagated. However, no caller
> currently cares, and since we already optimize out some
> calls to the shell under the hood, that distinction is not
> something that should be relied upon by callers.

The idea was initially to regard death by signal as an internal error.
But since (1) there are no callers that are really interested in the
difference and (2) we get it wrong in the shell case anyway, this change
makes total sense.

Acked-by: Johannes Sixt <j6t@xxxxxxxx>

> 
> Signed-off-by: Jeff King <peff@xxxxxxxx>
> ---
>  Documentation/technical/api-run-command.txt | 6 ++----
>  editor.c                                    | 2 +-
>  run-command.c                               | 2 +-
>  3 files changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt
> index f18b4f4..5d7d7f2 100644
> --- a/Documentation/technical/api-run-command.txt
> +++ b/Documentation/technical/api-run-command.txt
> @@ -55,10 +55,8 @@ The functions above do the following:
>    non-zero.
>  
>  . If the program terminated due to a signal, then the return value is the
> -  signal number - 128, ie. it is negative and so indicates an unusual
> -  condition; a diagnostic is printed. This return value can be passed to
> -  exit(2), which will report the same code to the parent process that a
> -  POSIX shell's $? would report for a program that died from the signal.
> +  signal number + 128, ie. the same value that a POSIX shell's $? would
> +  report.  A diagnostic is printed.
>  
>  
>  `start_async`::
> diff --git a/editor.c b/editor.c
> index 065a7ab..27bdecd 100644
> --- a/editor.c
> +++ b/editor.c
> @@ -51,7 +51,7 @@ int launch_editor(const char *path, struct strbuf *buffer, const char *const *en
>  		sigchain_push(SIGINT, SIG_IGN);
>  		sigchain_push(SIGQUIT, SIG_IGN);
>  		ret = finish_command(&p);
> -		sig = ret + 128;
> +		sig = ret - 128;
>  		sigchain_pop(SIGINT);
>  		sigchain_pop(SIGQUIT);
>  		if (sig == SIGINT || sig == SIGQUIT)
> diff --git a/run-command.c b/run-command.c
> index 757f263..cfb7274 100644
> --- a/run-command.c
> +++ b/run-command.c
> @@ -249,7 +249,7 @@ static int wait_or_whine(pid_t pid, const char *argv0)
>  		 * mimics the exit code that a POSIX shell would report for
>  		 * a program that died from this signal.
>  		 */
> -		code -= 128;
> +		code += 128;
>  	} else if (WIFEXITED(status)) {
>  		code = WEXITSTATUS(status);
>  		/*
> 

--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]