Add a documentation of the index file format version 5 to
Documentation/technical.
Helped-by: Michael Haggerty <mhagger@xxxxxxxxxxxx>
Helped-by: Junio C Hamano <gitster@xxxxxxxxx>
Helped-by: Thomas Rast <trast@xxxxxxxxxxxxxxx>
Helped-by: Nguyen Thai Ngoc Duy <pclouds@xxxxxxxxx>
Helped-by: Robin Rosenberg <robin.rosenberg@xxxxxxxxxx>
Signed-off-by: Thomas Gummerer <t.gummerer@xxxxxxxxx>
---
Documentation/technical/index-file-format-v5.txt | 281 ++++++++++++++++++++++
1 file changed, 281 insertions(+)
create mode 100644 Documentation/technical/index-file-format-v5.txt
diff --git a/Documentation/technical/index-file-format-v5.txt b/Documentation/technical/index-file-format-v5.txt
new file mode 100644
index 0000000..6253e34
--- /dev/null
+++ b/Documentation/technical/index-file-format-v5.txt
@@ -0,0 +1,281 @@
+GIT index format
+================
+
+== The git index file format
+
+ The git index file (.git/index) documents the status of the files
+ in the git staging area.
+
+ The staging area is used for preparing commits, merging, etc.
+
+ All binary numbers are in network byte order. Version 5 is described
+ here.
+
+ - A 20-byte header consisting of
+
+ sig (32-bits): Signature:
+ The signature is { 'D', 'I', 'R', 'C' } (stands for "dircache")
+
+ vnr (32-bits): Version number:
+ The current supported versions are 2, 3, 4 and 5.
+
+ ndir (32-bits): number of directories in the index.
+
+ nfile (32-bits): number of file entries in the index.
+
+ fblockoffset (32-bits): offset to the file block, relative to the
+ beginning of the file.
+
+ - Offset to the extensions.
+
+ nextensions (32-bits): number of extensions.
+
+ extoffset (32-bits): offset to the extension. (Possibly none, as
+ many as indicated in the 4-byte number of extensions)
+
+ headercrc (32-bits): crc checksum for the header and extension
+ offsets
+
+ - diroffsets (ndir * directory offsets): A directory offset for each
+ of the ndir directories in the index, sorted by pathname (of the
+ directory it's pointing to) (see below). The diroffsets are relative
+ to the beginning of the direntries block. [1]
+
+ - direntries (ndir * directory entries): A directory entry for each
+ of the ndir directories in the index, sorted by pathname (see
+ below). [2]
+
+ - fileoffsets (nfile * file offsets): A file offset for each of the
+ nfile files in the index (see below). The file offsets are relative
+ to the beginning of the fileentries block. [1]
+
+ - fileentries (nfile * file entries): A file entry for each of the
+ nfile files in the index (see below).
+
+ - crdata: A number of entries for conflicted data/resolved conflicts
+ (see below).
+
+ - Extensions (Currently none, see below in the future)
+
+ Extensions are identified by signature. Optional extensions can
+ be ignored if GIT does not understand them.
+
+ GIT supports an arbitrary number of extension, but currently none
+ is implemented. [3]
+
+ extsig (32-bits): extension signature. If the first byte is 'A'..'Z'
+ the extension is optional and can be ignored.
+
+ extsize (32-bits): size of the extension, excluding the header
+ (extsig, extsize, extchecksum).
+
+ extchecksum (32-bits): crc32 checksum of the extension signature
+ and size.
+
+ - Extension data.
+
+
+== Directory offsets (diroffsets)
+
+ diroffset (32-bits): offset to the directory relative to the beginning
+ of the index file. There are ndir + 1 offsets in the diroffset table,
+ the last is pointing to the end of the last direntry. With this last
+ entry, we can replace the strlen when reading each filename, by
+ calculating its length with the offsets.
+
+ This part is needed for making the directory entries bisectable and
+ thus allowing a binary search.
+
+== Directory entry (direntries)
+
+ Directory entries are sorted in lexicographic order by the name
+ of their path starting with the root.
+
+ pathname (variable length, nul terminated): relative to top level
+ directory (without the leading slash). '/' is used as path
+ separator. A string of length 0 ('') indicates the root directory.
+ The special path components ".", and ".." (without quotes) are
+ disallowed. The path also includes a trailing slash. [9]
+
+ foffset (32-bits): offset to the lexicographically first file in
+ the file offsets (fileoffsets), relative to the beginning of
+ the fileoffset block.
+
+ cr (32-bits): offset to conflicted/resolved data at the end of the
+ index. 0 if there is no such data. [4]
+
+ ncr (32-bits): number of conflicted/resolved data entries at the
+ end of the index if the offset is non 0. If cr is 0, ncr is
+ also 0.
+
+ nsubtrees (32-bits): number of subtrees this tree has in the index.
+
+ nfiles (32-bits): number of files in the directory, that are in
+ the index.
+
+ nentries (32-bits): number of entries in the index that is covered
+ by the tree this entry represents. (-1 if the entry is invalid).
+ This number includes all the files in this tree, recursively.
+
+ objname (160-bits): object name for the object that would result
+ from writing this span of index as a tree. This is only valid
+ if nentries is valid, meaning the cache-tree is valid.
+
+ flags (16-bits): 'flags' field split into (high to low bits) (For
+ D/F conflicts)
+
+ stage (2-bits): stage of the directory during merge
+
+ 14-bit unused
+
+ dircrc (32-bits): crc32 checksum for each directory entry.
+
+ The last 24 bytes (4-byte number of entries + 160-bit object name) are
+ for the cache tree. An entry can be in an invalidated state which is
+ represented by having -1 in the entry_count field.
+
+ The entries are written out in the top-down, depth-first order. The
+ first entry represents the root level of the repository, followed by
+ the first subtree - let's call it A - of the root level, followed by
+ the first subtree of A, ... There is no prefix compression for
+ directories.
+
+== File offsets (fileoffsets)
+
+ fileoffset (32-bits): offset to the file.
+
+ This part is needed for making the file entries bisectable and
+ thus allowing a binary search. There are nfile + 1 offsets in the
+ fileoffset table, the last is pointing to the end of the last
+ fileentry. With this last entry, we can replace the strlen when
+ reading each filename, by calculating its length with the offsets.
+
+== File entry (fileentries)
+
+ File entries are sorted in ascending order on the name field, after the
+ respective offset given by the directory entries. All file names are
+ prefix compressed, meaning the file name is relative to the directory.
+
+ filename (variable length, nul terminated). The exact encoding is
+ undefined, but the filename cannot contain a NUL byte (iow, the same
+ encoding as a UNIX pathname).
+
+ flags (16-bits): 'flags' field split into (high to low bits)
+
+ assumevalid (1-bit): assume-valid flag
+
+ intenttoadd (1-bit): intent-to-add flag, used by "git add -N".
+ Extended flag in index v3.
+
+ stage (2-bit): stage of the file during merge
+
+ skipworktree (1-bit): skip-worktree flag, used by sparse checkout.
+ Extended flag in index v3.
+
+ 11-bit unused, must be zero [6]
+
+ mode (16-bits): file mode, split into (high to low bits)
+
+ objtype (4-bits): object type
+ valid values in binary are 1000 (regular file), 1010 (symbolic
+ link) and 1110 (gitlink)
+
+ 3-bit unused
+
+ permission (9-bits): unix permission. Only 0755 and 0644 are valid
+ for regular files. Symbolic links and gitlinks have value 0 in
+ this field.
+
+ mtimes (32-bits): mtime seconds, the last time a file's data changed
+ this is stat(2) data
+
+ mtimens (32-bits): mtime nanosecond fractions
+ this is stat(2) data
+
+ statcrc (32-bits): crc32 checksum over ctime seconds, ctime
+ nanoseconds, ino, file size, dev, uid, gid (All stat(2) data
+ except mtime) [7]
+
+ objhash (160-bits): SHA-1 for the represented object
+
+# This will probably be changed in future versions as discussed here: http://colabti.org/irclogger/irclogger_log/git-devel?date=2012-06-21
+ entrycrc (32-bits): crc32 checksum for the file entry. The crc code
+ includes the offset to the file.
+
+== Conflict data
+
+ A conflict is represented in the index as a set of higher stage entries.
+ These entries are stored at the end of the index. When a conflict is
+ resolved (e.g. with "git add path"). A bit is flipped, to indicate that
+ the conflict is resolved, but the entries will be kept, so that
+ conflicts can be recreated (e.g. with "git checkout -m", in case users
+ want to redo a conflict resolution from scratch.
+
+ The first part of a conflict (usually stage 1) will be stored both in
+ the entries part of the index and in the conflict part. All other parts
+ will only be stored in the conflict part.
+
+ filename (variable length, nul terminated): filename of the entry,
+ relative to its containing directory).
+
+ nfileconflicts (32-bits): number of conflicts for the file [8]
+
+ flags (nfileconflicts * flags) (16-bits): 'flags' field split into:
+
+ conflicted (1-bit): conflicted state (conflicted/resolved) (1 if
+ conflicted)
+
+ stage (2-bits): stage during merge.
+
+ 13-bit unused
+
+ entry_mode (nfileconflicts * entry mode) (16-bits): octal numbers, entry
+ mode of eache entry in the different stages. (How many is defined by
+ the 4-byte number before)
+
+ objectnames (nfileconflicts * object names) (160-bits): object names
+ of the different stages.
+
+ conflictcrc (32-bits): crc32 checksum over conflict data.
+
+== Design explanations
+
+[1] The directory and file offsets are included in the index format
+ to enable bisectability of the index, for binary searches.Updating
+ a single entry and partial reading will benefit from this.
+
+[2] The directories are saved in their own block, to be able to
+ quickly search for a directory in the index. They include a
+ offset to the (lexically) first file in the directory.
+
+[3] The data of the cache-tree extension and the resolve undo
+ extension is now part of the index itself, but if other extensions
+ come up in the future, there is no need to change the index, they
+ can simply be added at the end.
+
+[4] To avoid rewrites of the whole index when there are conflicts or
+ conflicts are being resolved, conflicted data will be stored at
+ the end of the index. To mark the conflict resolved, just a bit
+ has to be flipped. The data will still be there, if a user wants
+ to redo the conflict resolution.
+
+[5] Since only 4 modes are effectively allowed in git but 32-bit are
+ used to store them, having a two bit flag for the mode is enough
+ and saves 4 byte per entry.
+
+[6] The length of the file name was dropped, since each file name is
+ nul terminated anyway.
+
+[7] Since all stat data (except mtime and ctime) is just used for
+ checking if a file has changed a checksum of the data is enough.
+ In addition to that Thomas Rast suggested ctime could be ditched
+ completely (core.trustctime=false) and thus included in the
+ checksum. This would save 24 bytes per index entry, which would
+ be about 4 MB on the Webkit index.
+ (Thanks for the suggestion to Michael Haggerty)
+
+[8] Since there can be more stage #1 entries, it is necessary to know
+ the number of conflict data entries there are.
+
+[9] As Michael Haggerty pointed out on the mailing list, storing the
+ trailing slash will simplify a few operations.
--
1.7.10.GIT
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html