Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@xxxxxxxxx>
Reviewed-by: Stefano Lattarini <stefano.lattarini@xxxxxxxxx>
Acked-by: Jonathan Nieder <jrnieder@xxxxxxxxx>
---
git-am.sh | 6 ++---
git-rebase.sh | 64 +++++++++++++++++++++++---------------------
t/t0201-gettext-fallbacks.sh | 8 +++---
t/t3400-rebase.sh | 8 +++---
t/t3406-rebase-message.sh | 9 ++++++-
5 files changed, 53 insertions(+), 42 deletions(-)
diff --git a/git-am.sh b/git-am.sh
index c02e6..8961a 100755
--- a/git-am.sh
+++ b/git-am.sh
@@ -102,9 +102,9 @@ stop_here_user_resolve () {
printf '%s\n' "$resolvemsg"
stop_here $1
fi
- eval_gettextln "When you have resolved this problem run \"\$cmdline --resolved\".
-If you would prefer to skip this patch, instead run \"\$cmdline --skip\".
-To restore the original branch and stop patching run \"\$cmdline --abort\"."
+ eval_gettextln "When you have resolved this problem, run \"\$cmdline --resolved\".
+If you prefer to skip this patch, run \"\$cmdline --skip\" instead.
+To restore the original branch and stop patching, run \"\$cmdline --abort\"."
stop_here $1
}
diff --git a/git-rebase.sh b/git-rebase.sh
index 1cd06..8710d 100755
--- a/git-rebase.sh
+++ b/git-rebase.sh
@@ -65,6 +65,7 @@ abort! abort and check out the original branch
skip! skip current patch and continue
"
. git-sh-setup
+. git-sh-i18n
set_reflog_action rebase
require_work_tree_exists
cd_to_toplevel
@@ -73,9 +74,9 @@ LF='
'
ok_to_skip_pre_rebase=
resolvemsg="
-When you have resolved this problem run \"git rebase --continue\".
-If you would prefer to skip this patch, instead run \"git rebase --skip\".
-To check out the original branch and stop rebasing run \"git rebase --abort\".
+$(gettext 'When you have resolved this problem, run "git rebase --continue".
+If you prefer to skip this patch, run "git rebase --skip" instead.
+To check out the original branch and stop rebasing, run "git rebase --abort".')
"
unset onto
cmd=
@@ -161,7 +162,7 @@ move_to_original_branch () {
git symbolic-ref \
-m "rebase finished: returning to $head_name" \
HEAD $head_name ||
- die "Could not move back to $head_name"
+ die "$(gettext "Could not move back to $head_name")"
;;
esac
}
@@ -180,12 +181,12 @@ run_pre_rebase_hook () {
test -x "$GIT_DIR/hooks/pre-rebase"
then
"$GIT_DIR/hooks/pre-rebase" ${1+"$@"} ||
- die "The pre-rebase hook refused to rebase."
+ die "$(gettext "The pre-rebase hook refused to rebase.")"
fi
}
test -f "$apply_dir"/applying &&
- die 'It looks like git-am is in progress. Cannot rebase.'
+ die "$(gettext "It looks like git-am is in progress. Cannot rebase.")"
if test -d "$apply_dir"
then
@@ -316,12 +317,12 @@ test $# -gt 2 && usage
if test -n "$cmd" &&
test "$interactive_rebase" != explicit
then
- die "--exec option must be used with --interactive option"
+ die "$(gettext -- "--exec option must be used with --interactive option")"
fi
if test -n "$action"
then
- test -z "$in_progress" && die "No rebase in progress?"
+ test -z "$in_progress" && die "$(gettext "No rebase in progress?")"
# Only interactive rebase uses detailed reflog messages
if test "$type" = interactive && test "$GIT_REFLOG_ACTION" = rebase
then
@@ -334,11 +335,11 @@ case "$action" in
continue)
# Sanity check
git rev-parse --verify HEAD >/dev/null ||
- die "Cannot read HEAD"
+ die "$(gettext "Cannot read HEAD")"
git update-index --ignore-submodules --refresh &&
git diff-files --quiet --ignore-submodules || {
- echo "You must edit all merge conflicts and then"
- echo "mark them as resolved using git add"
+ echo "$(gettext "You must edit all merge conflicts and then
+mark them as resolved using git add")"
exit 1
}
read_basic_state
@@ -355,7 +356,7 @@ abort)
case "$head_name" in
refs/*)
git symbolic-ref -m "rebase: aborting" HEAD $head_name ||
- die "Could not move back to $head_name"
+ die "$(eval_gettext "Could not move back to \$head_name")"
;;
esac
output git reset --hard $orig_head
@@ -367,15 +368,18 @@ esac
# Make sure no rebase is in progress
if test -n "$in_progress"
then
- die '
-It seems that there is already a '"${state_dir##*/}"' directory, and
-I wonder if you are in the middle of another rebase. If that is the
+ state_dir_base=${state_dir##*/}
+ cmd_live_rebase="git rebase (--continue | --abort | --skip)"
+ cmd_clear_stale_rebase="rm -fr \"$state_dir\""
+ die "
+$(eval_gettext 'It seems that there is already a $state_dir_base directory, and
+I wonder if you ware in the middle of another rebase. If that is the
case, please try
- git rebase (--continue | --abort | --skip)
+ $cmd_live_rebase
If that is not the case, please
- rm -fr '"$state_dir"'
+ $cmd_clear_stale_rebase
and run me again. I am stopping in case you still have something
-valuable there.'
+valuable there.')"
fi
if test -n "$rebase_root" && test -z "$onto"
@@ -413,7 +417,7 @@ then
;;
esac
upstream=`git rev-parse --verify "${upstream_name}^0"` ||
- die "invalid upstream $upstream_name"
+ die "$(eval_gettext "invalid upstream \$upstream_name")"
upstream_arg="$upstream_name"
else
if test -z "$onto"
@@ -437,19 +441,19 @@ case "$onto_name" in
then
case "$onto" in
?*"$LF"?*)
- die "$onto_name: there are more than one merge bases"
+ die "$(eval_gettext "\$onto_name: there are more than one merge bases")"
;;
'')
- die "$onto_name: there is no merge base"
+ die "$(eval_gettext "\$onto_name: there is no merge base")"
;;
esac
else
- die "$onto_name: there is no merge base"
+ die "$(eval_gettext "\$onto_name: there is no merge base")"
fi
;;
*)
onto=$(git rev-parse --verify "${onto_name}^0") ||
- die "Does not point to a valid commit: $onto_name"
+ die "$(eval_gettext "Does not point to a valid commit: \$onto_name")"
;;
esac
@@ -472,7 +476,7 @@ case "$#" in
then
head_name="detached HEAD"
else
- die "fatal: no such branch: $1"
+ die "$(eval_gettext "fatal: no such branch: \$branch_name")"
fi
;;
0)
@@ -492,7 +496,7 @@ case "$#" in
;;
esac
-require_clean_work_tree "rebase" "Please commit or stash them."
+require_clean_work_tree "rebase" "$(gettext "Please commit or stash them.")"
# Now we are rebasing commits $upstream..$orig_head (or with --root,
# everything leading up to $orig_head) on top of $onto
@@ -510,10 +514,10 @@ then
then
# Lazily switch to the target branch if needed...
test -z "$switch_to" || git checkout "$switch_to" --
- say "Current branch $branch_name is up to date."
+ say "$(eval_gettext "Current branch \$branch_name is up to date.")"
exit 0
else
- say "Current branch $branch_name is up to date, rebase forced."
+ say "$(eval_gettext "Current branch \$branch_name is up to date, rebase forced.")"
fi
fi
@@ -524,7 +528,7 @@ if test -n "$diffstat"
then
if test -n "$verbose"
then
- echo "Changes from $mb to $onto:"
+ echo "$(eval_gettext "Changes from \$mb to \$onto:")"
fi
# We want color (if set), but no pager
GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
@@ -533,7 +537,7 @@ fi
test "$type" = interactive && run_specific_rebase
# Detach HEAD and reset the tree
-say "First, rewinding head to replay your work on top of it..."
+say "$(gettext "First, rewinding head to replay your work on top of it...")"
git checkout -q "$onto^0" || die "could not detach HEAD"
git update-ref ORIG_HEAD $orig_head
@@ -541,7 +545,7 @@ git update-ref ORIG_HEAD $orig_head
# we just fast-forwarded.
if test "$mb" = "$orig_head"
then
- say "Fast-forwarded $branch_name to $onto_name."
+ say "$(eval_gettext "Fast-forwarded \$branch_name to \$onto_name.")"
move_to_original_branch
exit 0
fi
diff --git a/t/t0201-gettext-fallbacks.sh b/t/t0201-gettext-fallbacks.sh
index 52b1c..5d80a 100755
--- a/t/t0201-gettext-fallbacks.sh
+++ b/t/t0201-gettext-fallbacks.sh
@@ -51,16 +51,16 @@ test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate v
test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate variables with spaces' '
cmdline="git am" &&
export cmdline;
- printf "When you have resolved this problem run git am --resolved." >expect &&
- eval_gettext "When you have resolved this problem run \$cmdline --resolved." >actual
+ printf "When you have resolved this problem, run git am --resolved." >expect &&
+ eval_gettext "When you have resolved this problem, run \$cmdline --resolved." >actual
test_i18ncmp expect actual
'
test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate variables with spaces and quotes' '
cmdline="git am" &&
export cmdline;
- printf "When you have resolved this problem run \"git am --resolved\"." >expect &&
- eval_gettext "When you have resolved this problem run \"\$cmdline --resolved\"." >actual
+ printf "When you have resolved this problem, run \"git am --resolved\"." >expect &&
+ eval_gettext "When you have resolved this problem, run \"\$cmdline --resolved\"." >actual
test_i18ncmp expect actual
'
diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh
index 7788a..1de0e 100755
--- a/t/t3400-rebase.sh
+++ b/t/t3400-rebase.sh
@@ -68,24 +68,24 @@ test_expect_success 'rebase against master' '
test_expect_success 'rebase against master twice' '
git rebase master >out &&
- grep "Current branch my-topic-branch is up to date" out
+ test_i18ngrep "Current branch my-topic-branch is up to date" out
'
test_expect_success 'rebase against master twice with --force' '
git rebase --force-rebase master >out &&
- grep "Current branch my-topic-branch is up to date, rebase forced" out
+ test_i18ngrep "Current branch my-topic-branch is up to date, rebase forced" out
'
test_expect_success 'rebase against master twice from another branch' '
git checkout my-topic-branch^ &&
git rebase master my-topic-branch >out &&
- grep "Current branch my-topic-branch is up to date" out
+ test_i18ngrep "Current branch my-topic-branch is up to date" out
'
test_expect_success 'rebase fast-forward to master' '
git checkout my-topic-branch^ &&
git rebase my-topic-branch >out &&
- grep "Fast-forwarded HEAD to my-topic-branch" out
+ test_i18ngrep "Fast-forwarded HEAD to my-topic-branch" out
'
test_expect_success 'the rebase operation should not have destroyed author information' '
diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh
index 68983..e6a9a 100755
--- a/t/t3406-rebase-message.sh
+++ b/t/t3406-rebase-message.sh
@@ -62,9 +62,16 @@ test_expect_success 'rebase -n overrides config rebase.stat config' '
! grep "^ fileX | *1 +$" diffstat.txt
'
+# Output to stderr:
+#
+# "Does not point to a valid commit: invalid-ref"
+#
+# NEEDSWORK: This "grep" is fine in real non-C locales, but
+# GETTEXT_POISON poisons the refname along with the enclosing
+# error message.
test_expect_success 'rebase --onto outputs the invalid ref' '
test_must_fail git rebase --onto invalid-ref HEAD HEAD 2>err &&
- grep "invalid-ref" err
+ test_i18ngrep "invalid-ref" err
'
test_done
--
1.7.12.rc0.16.gf4916ac
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html