This series (based on 'master') presents three simple patches that
improve the style of git's configure.ac a little. They should cause
no semantic change.
There is still ample room for improvements in configure.ac, but that
is better done incrementally IMHO -- no need for a patch bomb.
Below is the diff between the 'configure' script generated before
this series is applied and the one generated afterwards. Both have
been generated with autoconf 2.68.
Stefano Lattarini (3):
configure: move definitions of private m4 macros before AC_INIT invocation
configure: avoid some code repetitions thanks to m4_{push,pop}def
configure: be more idiomatic
configure.ac | 198 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 100 insertions(+), 98 deletions(-)
-*-*-
--- configure.before 2012-03-26 18:18:42.000000000 +0200
+++ configure.after 2012-03-26 18:32:13.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for git 1.7.10.rc2.10.gb47606.
+# Generated by GNU Autoconf 2.68 for git 1.7.10.rc2.13.g4f748.
#
# Report bugs to <git@xxxxxxxxxxxxxxx>.
#
@@ -560,8 +560,8 @@
# Identity of this package.
PACKAGE_NAME='git'
PACKAGE_TARNAME='git'
-PACKAGE_VERSION='1.7.10.rc2.10.gb47606'
-PACKAGE_STRING='git 1.7.10.rc2.10.gb47606'
+PACKAGE_VERSION='1.7.10.rc2.13.g4f748'
+PACKAGE_STRING='git 1.7.10.rc2.13.g4f748'
PACKAGE_BUGREPORT='git@xxxxxxxxxxxxxxx'
PACKAGE_URL=''
@@ -1283,7 +1283,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures git 1.7.10.rc2.10.gb47606 to adapt to many kinds of systems.
+\`configure' configures git 1.7.10.rc2.13.g4f748 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1344,7 +1344,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of git 1.7.10.rc2.10.gb47606:";;
+ short | recursive ) echo "Configuration of git 1.7.10.rc2.13.g4f748:";;
esac
cat <<\_ACEOF
@@ -1483,7 +1483,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-git configure 1.7.10.rc2.10.gb47606
+git configure 1.7.10.rc2.13.g4f748
generated by GNU Autoconf 2.68
Copyright (C) 2010 Free Software Foundation, Inc.
@@ -1963,7 +1963,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by git $as_me 1.7.10.rc2.10.gb47606, which was
+It was created by git $as_me 1.7.10.rc2.13.g4f748, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
@@ -2320,51 +2320,6 @@
echo "# ${config_append}. Generated by configure." > "${config_append}"
-
-## Definitions of macros
-# GIT_CONF_APPEND_LINE(LINE)
-# --------------------------
-# Append LINE to file ${config_append}
-# GIT_CONF_APPEND_LINE
-#
-# GIT_ARG_SET_PATH(PROGRAM)
-# -------------------------
-# Provide --with-PROGRAM=PATH option to set PATH to PROGRAM
-# Optional second argument allows setting NO_PROGRAM=YesPlease if
-# --without-PROGRAM version used.
-# GIT_ARG_SET_PATH
-#
-# GIT_CONF_APPEND_PATH(PROGRAM)
-# ------------------------------
-# Parse --with-PROGRAM=PATH option to set PROGRAM_PATH=PATH
-# Used by GIT_ARG_SET_PATH(PROGRAM)
-# Optional second argument allows setting NO_PROGRAM=YesPlease if
-# --without-PROGRAM is used.
- # GIT_CONF_APPEND_PATH
-#
-# GIT_PARSE_WITH(PACKAGE)
-# -----------------------
-# For use in AC_ARG_WITH action-if-found, for packages default ON.
-# * Set NO_PACKAGE=YesPlease for --without-PACKAGE
-# * Set PACKAGEDIR=PATH for --with-PACKAGE=PATH
-# * Unset NO_PACKAGE for --with-PACKAGE without ARG
-# GIT_PARSE_WITH
-#
-# GIT_PARSE_WITH_SET_MAKE_VAR(WITHNAME, VAR, HELP_TEXT)
-# ---------------------
-# Set VAR to the value specied by --with-WITHNAME.
-# No verification of arguments is performed, but warnings are issued
-# if either 'yes' or 'no' is specified.
-# HELP_TEXT is presented when --help is called.
-# This is a direct way to allow setting variables in the Makefile.
-# GIT_PARSE_WITH_SET_MAKE_VAR
-
-
-
-
-
-
-
# Directories holding "saner" versions of common or POSIX binaries.
# Check whether --with-sane-tool-path was given.
@@ -2392,16 +2347,15 @@
# Check whether --with-lib was given.
if test "${with_lib+set}" = set; then :
- withval=$with_lib; if test "$withval" = "no" || test "$withval" = "yes"; then \
+ withval=$with_lib; if test "$withval" = "no" || test "$withval" = "yes"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should provide name for --with-lib=ARG" >&5
-$as_echo "$as_me: WARNING: You should provide name for --with-lib=ARG" >&2;}; \
-else \
- lib=$withval; \
+$as_echo "$as_me: WARNING: You should provide name for --with-lib=ARG" >&2;}
+ else
+ lib=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting lib to '$lib'" >&5
-$as_echo "$as_me: Setting lib to '$lib'" >&6;}; \
- echo "lib=$withval" >> "${config_append}"; \
-fi; \
-
+$as_echo "$as_me: Setting lib to '$lib'" >&6;}
+ echo "lib=$withval" >> "${config_append}"
+ fi
fi
@@ -2479,23 +2433,22 @@
# Check whether --with-openssl was given.
if test "${with_openssl+set}" = set; then :
- withval=$with_openssl; \
-PACKAGE=OPENSSL; \
-if test "$withval" = "no"; then \
- NO_OPENSSL=YesPlease; \
-elif test "$withval" = "yes"; then \
- NO_OPENSSL=; \
-else \
- NO_OPENSSL=; \
- OPENSSLDIR=$withval; \
+ withval=$with_openssl; PACKAGE=OPENSSL
+ if test "$withval" = "no"; then
+ NO_OPENSSL=YesPlease
+ elif test "$withval" = "yes"; then
+ NO_OPENSSL=
+ else
+ NO_OPENSSL=
+ OPENSSLDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting OPENSSLDIR to $withval" >&5
-$as_echo "$as_me: Setting OPENSSLDIR to $withval" >&6;}; \
- echo "${PACKAGE}DIR=$withval" >> "${config_append}"; \
-fi \
+$as_echo "$as_me: Setting OPENSSLDIR to $withval" >&6;}
+ echo "${PACKAGE}DIR=$withval" >> "${config_append}"
+ fi
fi
-#
+
# Define USE_LIBPCRE if you have and want to use libpcre. git-grep will be
# able to use Perl-compatible regular expressions.
#
@@ -2505,18 +2458,17 @@
# Check whether --with-libpcre was given.
if test "${with_libpcre+set}" = set; then :
- withval=$with_libpcre; if test "$withval" = "no"; then \
- USE_LIBPCRE=; \
-elif test "$withval" = "yes"; then \
- USE_LIBPCRE=YesPlease; \
-else
- USE_LIBPCRE=YesPlease; \
- LIBPCREDIR=$withval; \
+ withval=$with_libpcre; if test "$withval" = "no"; then
+ USE_LIBPCRE=
+ elif test "$withval" = "yes"; then
+ USE_LIBPCRE=YesPlease
+ else
+ USE_LIBPCRE=YesPlease
+ LIBPCREDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting LIBPCREDIR to $withval" >&5
-$as_echo "$as_me: Setting LIBPCREDIR to $withval" >&6;}; \
- echo "LIBPCREDIR=$withval" >> "${config_append}"; \
-fi \
-
+$as_echo "$as_me: Setting LIBPCREDIR to $withval" >&6;}
+ echo "LIBPCREDIR=$withval" >> "${config_append}"
+ fi
fi
#
@@ -2529,18 +2481,18 @@
# Check whether --with-curl was given.
if test "${with_curl+set}" = set; then :
- withval=$with_curl; PACKAGE=CURL; \
-if test "$withval" = "no"; then \
- NO_CURL=YesPlease; \
-elif test "$withval" = "yes"; then \
- NO_CURL=; \
-else \
- NO_CURL=; \
- CURLDIR=$withval; \
+ withval=$with_curl; PACKAGE=CURL
+ if test "$withval" = "no"; then
+ NO_CURL=YesPlease
+ elif test "$withval" = "yes"; then
+ NO_CURL=
+ else
+ NO_CURL=
+ CURLDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting CURLDIR to $withval" >&5
-$as_echo "$as_me: Setting CURLDIR to $withval" >&6;}; \
- echo "${PACKAGE}DIR=$withval" >> "${config_append}"; \
-fi \
+$as_echo "$as_me: Setting CURLDIR to $withval" >&6;}
+ echo "${PACKAGE}DIR=$withval" >> "${config_append}"
+ fi
fi
@@ -2553,18 +2505,18 @@
# Check whether --with-expat was given.
if test "${with_expat+set}" = set; then :
- withval=$with_expat; PACKAGE=EXPAT; \
-if test "$withval" = "no"; then \
- NO_EXPAT=YesPlease; \
-elif test "$withval" = "yes"; then \
- NO_EXPAT=; \
-else \
- NO_EXPAT=; \
- EXPATDIR=$withval; \
+ withval=$with_expat; PACKAGE=EXPAT
+ if test "$withval" = "no"; then
+ NO_EXPAT=YesPlease
+ elif test "$withval" = "yes"; then
+ NO_EXPAT=
+ else
+ NO_EXPAT=
+ EXPATDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting EXPATDIR to $withval" >&5
-$as_echo "$as_me: Setting EXPATDIR to $withval" >&6;}; \
- echo "${PACKAGE}DIR=$withval" >> "${config_append}"; \
-fi \
+$as_echo "$as_me: Setting EXPATDIR to $withval" >&6;}
+ echo "${PACKAGE}DIR=$withval" >> "${config_append}"
+ fi
fi
@@ -2587,18 +2539,18 @@
# Check whether --with-iconv was given.
if test "${with_iconv+set}" = set; then :
- withval=$with_iconv; PACKAGE=ICONV; \
-if test "$withval" = "no"; then \
- NO_ICONV=YesPlease; \
-elif test "$withval" = "yes"; then \
- NO_ICONV=; \
-else \
- NO_ICONV=; \
- ICONVDIR=$withval; \
+ withval=$with_iconv; PACKAGE=ICONV
+ if test "$withval" = "no"; then
+ NO_ICONV=YesPlease
+ elif test "$withval" = "yes"; then
+ NO_ICONV=
+ else
+ NO_ICONV=
+ ICONVDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting ICONVDIR to $withval" >&5
-$as_echo "$as_me: Setting ICONVDIR to $withval" >&6;}; \
- echo "${PACKAGE}DIR=$withval" >> "${config_append}"; \
-fi \
+$as_echo "$as_me: Setting ICONVDIR to $withval" >&6;}
+ echo "${PACKAGE}DIR=$withval" >> "${config_append}"
+ fi
fi
@@ -2619,17 +2571,16 @@
# Check whether --with-gitconfig was given.
if test "${with_gitconfig+set}" = set; then :
- withval=$with_gitconfig; if test -n "$withval"; then \
- if test "$withval" = "yes" -o "$withval" = "no"; then \
+ withval=$with_gitconfig; if test -n "$withval"; then
+ if test "$withval" = "yes" -o "$withval" = "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You likely do not want either 'yes' or 'no' as
a value for gitconfig (ETC_GITCONFIG). Maybe you do...?" >&5
$as_echo "$as_me: WARNING: You likely do not want either 'yes' or 'no' as
- a value for gitconfig (ETC_GITCONFIG). Maybe you do...?" >&2;}; \
- fi; \
- \
+ a value for gitconfig (ETC_GITCONFIG). Maybe you do...?" >&2;}
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting ETC_GITCONFIG to $withval" >&5
-$as_echo "$as_me: Setting ETC_GITCONFIG to $withval" >&6;}; \
- echo "ETC_GITCONFIG=$withval" >> "${config_append}"; \
+$as_echo "$as_me: Setting ETC_GITCONFIG to $withval" >&6;}
+ echo "ETC_GITCONFIG=$withval" >> "${config_append}"
fi
fi
@@ -2639,17 +2590,16 @@
# Check whether --with-gitattributes was given.
if test "${with_gitattributes+set}" = set; then :
- withval=$with_gitattributes; if test -n "$withval"; then \
- if test "$withval" = "yes" -o "$withval" = "no"; then \
+ withval=$with_gitattributes; if test -n "$withval"; then
+ if test "$withval" = "yes" -o "$withval" = "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You likely do not want either 'yes' or 'no' as
a value for gitattributes (ETC_GITATTRIBUTES). Maybe you do...?" >&5
$as_echo "$as_me: WARNING: You likely do not want either 'yes' or 'no' as
- a value for gitattributes (ETC_GITATTRIBUTES). Maybe you do...?" >&2;}; \
- fi; \
- \
+ a value for gitattributes (ETC_GITATTRIBUTES). Maybe you do...?" >&2;}
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting ETC_GITATTRIBUTES to $withval" >&5
-$as_echo "$as_me: Setting ETC_GITATTRIBUTES to $withval" >&6;}; \
- echo "ETC_GITATTRIBUTES=$withval" >> "${config_append}"; \
+$as_echo "$as_me: Setting ETC_GITATTRIBUTES to $withval" >&6;}
+ echo "ETC_GITATTRIBUTES=$withval" >> "${config_append}"
fi
fi
@@ -2659,17 +2609,16 @@
# Check whether --with-pager was given.
if test "${with_pager+set}" = set; then :
- withval=$with_pager; if test -n "$withval"; then \
- if test "$withval" = "yes" -o "$withval" = "no"; then \
+ withval=$with_pager; if test -n "$withval"; then
+ if test "$withval" = "yes" -o "$withval" = "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You likely do not want either 'yes' or 'no' as
a value for pager (DEFAULT_PAGER). Maybe you do...?" >&5
$as_echo "$as_me: WARNING: You likely do not want either 'yes' or 'no' as
- a value for pager (DEFAULT_PAGER). Maybe you do...?" >&2;}; \
- fi; \
- \
+ a value for pager (DEFAULT_PAGER). Maybe you do...?" >&2;}
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting DEFAULT_PAGER to $withval" >&5
-$as_echo "$as_me: Setting DEFAULT_PAGER to $withval" >&6;}; \
- echo "DEFAULT_PAGER=$withval" >> "${config_append}"; \
+$as_echo "$as_me: Setting DEFAULT_PAGER to $withval" >&6;}
+ echo "DEFAULT_PAGER=$withval" >> "${config_append}"
fi
fi
@@ -2678,17 +2627,16 @@
# Check whether --with-editor was given.
if test "${with_editor+set}" = set; then :
- withval=$with_editor; if test -n "$withval"; then \
- if test "$withval" = "yes" -o "$withval" = "no"; then \
+ withval=$with_editor; if test -n "$withval"; then
+ if test "$withval" = "yes" -o "$withval" = "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You likely do not want either 'yes' or 'no' as
a value for editor (DEFAULT_EDITOR). Maybe you do...?" >&5
$as_echo "$as_me: WARNING: You likely do not want either 'yes' or 'no' as
- a value for editor (DEFAULT_EDITOR). Maybe you do...?" >&2;}; \
- fi; \
- \
+ a value for editor (DEFAULT_EDITOR). Maybe you do...?" >&2;}
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting DEFAULT_EDITOR to $withval" >&5
-$as_echo "$as_me: Setting DEFAULT_EDITOR to $withval" >&6;}; \
- echo "DEFAULT_EDITOR=$withval" >> "${config_append}"; \
+$as_echo "$as_me: Setting DEFAULT_EDITOR to $withval" >&6;}
+ echo "DEFAULT_EDITOR=$withval" >> "${config_append}"
fi
fi
@@ -2698,143 +2646,138 @@
# Check whether --with-shell was given.
if test "${with_shell+set}" = set; then :
- withval=$with_shell; PROGRAM=SHELL; \
-if test "$withval" = "no"; then \
- if test -n ""; then \
- SHELL_PATH=$withval; \
+ withval=$with_shell; PROGRAM=SHELL
+ if test "$withval" = "no"; then
+ if test -n ""; then
+ SHELL_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling use of ${PROGRAM}" >&5
-$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}; \
- echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"; \
- echo "${PROGRAM}_PATH=" >> "${config_append}"; \
- else \
- as_fn_error $? "You cannot use git without shell" "$LINENO" 5; \
- fi; \
-else \
- if test "$withval" = "yes"; then \
+$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}
+ echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"
+ echo "${PROGRAM}_PATH=" >> "${config_append}"
+ else
+ as_fn_error $? "You cannot use git without shell" "$LINENO" 5
+ fi
+ else
+ if test "$withval" = "yes"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should provide path for --with-shell=PATH" >&5
-$as_echo "$as_me: WARNING: You should provide path for --with-shell=PATH" >&2;}; \
- else \
- SHELL_PATH=$withval; \
+$as_echo "$as_me: WARNING: You should provide path for --with-shell=PATH" >&2;}
+ else
+ SHELL_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting SHELL_PATH to $withval" >&5
-$as_echo "$as_me: Setting SHELL_PATH to $withval" >&6;}; \
- echo "${PROGRAM}_PATH=$withval" >> "${config_append}"; \
- fi; \
-fi; \
+$as_echo "$as_me: Setting SHELL_PATH to $withval" >&6;}
+ echo "${PROGRAM}_PATH=$withval" >> "${config_append}"
+ fi
+ fi
fi
-
#
# Define PERL_PATH to provide path to Perl.
# Check whether --with-perl was given.
if test "${with_perl+set}" = set; then :
- withval=$with_perl; PROGRAM=PERL; \
-if test "$withval" = "no"; then \
- if test -n ""; then \
- PERL_PATH=$withval; \
+ withval=$with_perl; PROGRAM=PERL
+ if test "$withval" = "no"; then
+ if test -n ""; then
+ PERL_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling use of ${PROGRAM}" >&5
-$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}; \
- echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"; \
- echo "${PROGRAM}_PATH=" >> "${config_append}"; \
- else \
- as_fn_error $? "You cannot use git without perl" "$LINENO" 5; \
- fi; \
-else \
- if test "$withval" = "yes"; then \
+$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}
+ echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"
+ echo "${PROGRAM}_PATH=" >> "${config_append}"
+ else
+ as_fn_error $? "You cannot use git without perl" "$LINENO" 5
+ fi
+ else
+ if test "$withval" = "yes"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should provide path for --with-perl=PATH" >&5
-$as_echo "$as_me: WARNING: You should provide path for --with-perl=PATH" >&2;}; \
- else \
- PERL_PATH=$withval; \
+$as_echo "$as_me: WARNING: You should provide path for --with-perl=PATH" >&2;}
+ else
+ PERL_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting PERL_PATH to $withval" >&5
-$as_echo "$as_me: Setting PERL_PATH to $withval" >&6;}; \
- echo "${PROGRAM}_PATH=$withval" >> "${config_append}"; \
- fi; \
-fi; \
+$as_echo "$as_me: Setting PERL_PATH to $withval" >&6;}
+ echo "${PROGRAM}_PATH=$withval" >> "${config_append}"
+ fi
+ fi
fi
-
#
# Define PYTHON_PATH to provide path to Python.
# Check whether --with-python was given.
if test "${with_python+set}" = set; then :
- withval=$with_python; PROGRAM=PYTHON; \
-if test "$withval" = "no"; then \
- if test -n "allow-without"; then \
- PYTHON_PATH=$withval; \
+ withval=$with_python; PROGRAM=PYTHON
+ if test "$withval" = "no"; then
+ if test -n "allow-without"; then
+ PYTHON_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling use of ${PROGRAM}" >&5
-$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}; \
- echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"; \
- echo "${PROGRAM}_PATH=" >> "${config_append}"; \
- else \
- as_fn_error $? "You cannot use git without python" "$LINENO" 5; \
- fi; \
-else \
- if test "$withval" = "yes"; then \
+$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}
+ echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"
+ echo "${PROGRAM}_PATH=" >> "${config_append}"
+ else
+ as_fn_error $? "You cannot use git without python" "$LINENO" 5
+ fi
+ else
+ if test "$withval" = "yes"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should provide path for --with-python=PATH" >&5
-$as_echo "$as_me: WARNING: You should provide path for --with-python=PATH" >&2;}; \
- else \
- PYTHON_PATH=$withval; \
+$as_echo "$as_me: WARNING: You should provide path for --with-python=PATH" >&2;}
+ else
+ PYTHON_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting PYTHON_PATH to $withval" >&5
-$as_echo "$as_me: Setting PYTHON_PATH to $withval" >&6;}; \
- echo "${PROGRAM}_PATH=$withval" >> "${config_append}"; \
- fi; \
-fi; \
+$as_echo "$as_me: Setting PYTHON_PATH to $withval" >&6;}
+ echo "${PROGRAM}_PATH=$withval" >> "${config_append}"
+ fi
+ fi
fi
-
#
# Define ZLIB_PATH to provide path to zlib.
# Check whether --with-zlib was given.
if test "${with_zlib+set}" = set; then :
- withval=$with_zlib; PROGRAM=ZLIB; \
-if test "$withval" = "no"; then \
- if test -n ""; then \
- ZLIB_PATH=$withval; \
+ withval=$with_zlib; PROGRAM=ZLIB
+ if test "$withval" = "no"; then
+ if test -n ""; then
+ ZLIB_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Disabling use of ${PROGRAM}" >&5
-$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}; \
- echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"; \
- echo "${PROGRAM}_PATH=" >> "${config_append}"; \
- else \
- as_fn_error $? "You cannot use git without zlib" "$LINENO" 5; \
- fi; \
-else \
- if test "$withval" = "yes"; then \
+$as_echo "$as_me: Disabling use of ${PROGRAM}" >&6;}
+ echo "NO_${PROGRAM}=YesPlease" >> "${config_append}"
+ echo "${PROGRAM}_PATH=" >> "${config_append}"
+ else
+ as_fn_error $? "You cannot use git without zlib" "$LINENO" 5
+ fi
+ else
+ if test "$withval" = "yes"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should provide path for --with-zlib=PATH" >&5
-$as_echo "$as_me: WARNING: You should provide path for --with-zlib=PATH" >&2;}; \
- else \
- ZLIB_PATH=$withval; \
+$as_echo "$as_me: WARNING: You should provide path for --with-zlib=PATH" >&2;}
+ else
+ ZLIB_PATH=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting ZLIB_PATH to $withval" >&5
-$as_echo "$as_me: Setting ZLIB_PATH to $withval" >&6;}; \
- echo "${PROGRAM}_PATH=$withval" >> "${config_append}"; \
- fi; \
-fi; \
+$as_echo "$as_me: Setting ZLIB_PATH to $withval" >&6;}
+ echo "${PROGRAM}_PATH=$withval" >> "${config_append}"
+ fi
+ fi
fi
-
#
# Declare the with-tcltk/without-tcltk options.
# Check whether --with-tcltk was given.
if test "${with_tcltk+set}" = set; then :
- withval=$with_tcltk; \
-PACKAGE=TCLTK; \
-if test "$withval" = "no"; then \
- NO_TCLTK=YesPlease; \
-elif test "$withval" = "yes"; then \
- NO_TCLTK=; \
-else \
- NO_TCLTK=; \
- TCLTKDIR=$withval; \
+ withval=$with_tcltk; PACKAGE=TCLTK
+ if test "$withval" = "no"; then
+ NO_TCLTK=YesPlease
+ elif test "$withval" = "yes"; then
+ NO_TCLTK=
+ else
+ NO_TCLTK=
+ TCLTKDIR=$withval
{ $as_echo "$as_me:${as_lineno-$LINENO}: Setting TCLTKDIR to $withval" >&5
-$as_echo "$as_me: Setting TCLTKDIR to $withval" >&6;}; \
- echo "${PACKAGE}DIR=$withval" >> "${config_append}"; \
-fi \
+$as_echo "$as_me: Setting TCLTKDIR to $withval" >&6;}
+ echo "${PACKAGE}DIR=$withval" >> "${config_append}"
+ fi
fi
@@ -7183,7 +7126,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by git $as_me 1.7.10.rc2.10.gb47606, which was
+This file was extended by git $as_me 1.7.10.rc2.13.g4f748, which was
generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -7236,7 +7179,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-git config.status 1.7.10.rc2.10.gb47606
+git config.status 1.7.10.rc2.13.g4f748
configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html