From: Robin Rosenberg <robin.rosenberg@xxxxxxxxxx>
This patch uses git-apply to do the patching which simplifies the code a lot.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@xxxxxxxxxx>
---
This is a cleaned up version of a previously submitted patch with same name.
I'm using non-ascii characters in the
git-cvsexportcommit.perl | 166 +++++++++++++---------------------------
t/t9200-git-cvsexportcommit.sh | 108 +++++++++++++++++++-------
2 files changed, 133 insertions(+), 141 deletions(-)
diff --git a/git-cvsexportcommit.perl b/git-cvsexportcommit.perl
index c9d1d88..f1a9c1b 100755
--- a/git-cvsexportcommit.perl
+++ b/git-cvsexportcommit.perl
@@ -2,9 +2,8 @@ #!/usr/bin/perl -w
# Known limitations:
# - does not propagate permissions
-# - tells "ready for commit" even when things could not be completed
-# (not sure this is true anymore, more testing is needed)
-# - does not handle whitespace in pathnames at all.
+# - error handling has not been extensively tested
+#
use strict;
use Getopt::Std;
@@ -116,16 +115,13 @@ if ($opt_a) {
close MSG;
my (@afiles, @dfiles, @mfiles, @dirs);
-my %amodes;
-my @files = safe_pipe_capture('git-diff-tree', '-r', $parent, $commit);
-#print @files;
+my $files = safe_pipe_capture_blob('git-diff-tree', '-z', '-r', $parent, $commit);
$? && die "Error in git-diff-tree";
-foreach my $f (@files) {
- chomp $f;
- my @fields = split(m!\s+!, $f);
+while ($files =~ m/(.*?\000.*?\000)/g) {
+ my $f=$1;
+ my @fields = ( $f =~ m/^(\S+) (\S+) (\S+) (\S+) (\S+)\000(.*)\000/ );
if ($fields[4] eq 'A') {
my $path = $fields[5];
- $amodes{$path} = $fields[1];
push @afiles, $path;
# add any needed parent directories
$path = dirname $path;
@@ -141,20 +137,27 @@ foreach my $f (@files) {
push @dfiles, $fields[5];
}
}
-my (@binfiles, @abfiles, @dbfiles, @bfiles, @mbfiles);
-@binfiles = grep m/^Binary files/, safe_pipe_capture('git-diff-tree', '-p', $parent, $commit);
-map { chomp } @binfiles;
-@abfiles = grep s/^Binary files \/dev\/null and b\/(.*) differ$/$1/, @binfiles;
-@dbfiles = grep s/^Binary files a\/(.*) and \/dev\/null differ$/$1/, @binfiles;
-@mbfiles = grep s/^Binary files a\/(.*) and b\/(.*) differ$/$1/, @binfiles;
-push @bfiles, @abfiles;
-push @bfiles, @dbfiles;
-push @bfiles, @mbfiles;
-push @mfiles, @mbfiles;
+my (@diff,@binfiles, @abfiles, @dbfiles, @bfiles, @mbfiles);
+@diff = safe_pipe_capture('git-diff-tree','--binary','-p',$parent,$commit);
+# the --binary format is harder to grok for names of binary files so we execute a new diff
+# if it looks like binary files exists to find out
+if (grep /^GIT binary patch$/, @diff) {
+ @binfiles = grep m/^Binary files/, safe_pipe_capture('git-diff-tree', '-p', $parent, $commit);
+ map { chomp } @binfiles;
+ @abfiles = grep s/^Binary files \/dev\/null and b\/(.*) differ$/$1/, @binfiles;
+ @dbfiles = grep s/^Binary files a\/(.*) and \/dev\/null differ$/$1/, @binfiles;
+ @mbfiles = grep s/^Binary files a\/(.*) and b\/(.*) differ$/$1/, @binfiles;
+ push @abfiles, grep s/^Binary files \/dev\/null and "b\/(.*)" differ$/$1/, @binfiles;
+ push @dbfiles, grep s/^Binary files "a\/(.*)" and \/dev\/null differ$/$1/, @binfiles;
+ push @mbfiles, grep s/^Binary files "a\/(.*)" and \"b\/(.*)\" differ$/$1/, @binfiles;
+ push @bfiles, @abfiles;
+ push @bfiles, @dbfiles;
+ push @bfiles, @mbfiles;
+ map { s/\\([\d]{3})/sprintf('%c',oct $1)/eg } @bfiles;
+}
$opt_v && print "The commit affects:\n ";
$opt_v && print join ("\n ", @afiles,@mfiles,@dfiles) . "\n\n";
-undef @files; # don't need it anymore
# check that the files are clean and up to date according to cvs
my $dirty;
@@ -197,87 +200,32 @@ if ($dirty) {
}
}
-###
-### NOTE: if you are planning to die() past this point
-### you MUST call cleanupcvs(@files) before die()
-###
-
-
-print "Creating new directories\n";
-foreach my $d (@dirs) {
- unless (mkdir $d) {
- warn "Could not mkdir $d: $!";
- $dirty = 1;
- }
- `cvs add $d`;
- if ($?) {
- $dirty = 1;
- warn "Failed to cvs add directory $d -- you may need to do it manually";
- }
-}
-
-print "'Patching' binary files\n";
-
-foreach my $f (@bfiles) {
- # check that the file in cvs matches the "old" file
- # extract the file to $tmpdir and compare with cmp
- if (not(grep { $_ eq $f } @afiles)) {
- my $tree = safe_pipe_capture('git-rev-parse', "$parent^{tree}");
- chomp $tree;
- my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
- chomp $blob;
- `git-cat-file blob $blob > $tmpdir/blob`;
- if (system('cmp', '-s', $f, "$tmpdir/blob")) {
- warn "Binary file $f in CVS does not match parent.\n";
- if (not $opt_f) {
- $dirty = 1;
- next;
- }
- }
- }
- if (not(grep { $_ eq $f } @dfiles)) {
- my $tree = safe_pipe_capture('git-rev-parse', "$commit^{tree}");
- chomp $tree;
- my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
- chomp $blob;
- # replace with the new file
- `git-cat-file blob $blob > $f`;
- }
-
- # TODO: something smart with file modes
-
-}
-if ($dirty) {
- cleanupcvs(@files);
- die "Exiting: Binary files in CVS do not match parent";
-}
-
## apply non-binary changes
my $fuzz = $opt_p ? 0 : 2;
-print "Patching non-binary files\n";
+print "Patching\n";
-if (scalar(@afiles)+scalar(@dfiles)+scalar(@mfiles) != scalar(@bfiles)) {
- print `(git-diff-tree -p $parent -p $commit | patch -p1 -F $fuzz ) 2>&1`;
-}
+open APPLY, "|GIT_DIR= git-apply -C$fuzz" || die "cannot patch";
+(print APPLY @diff) || die "cannot patch";
+close APPLY || die "cannot patch";
+print "Patch applied successfully. Adding new files and directories to CVS\n";
my $dirtypatch = 0;
-if (($? >> 8) == 2) {
- cleanupcvs(@files);
- die "Exiting: Patch reported serious trouble -- you will have to apply this patch manually";
-} elsif (($? >> 8) == 1) { # some hunks failed to apply
- $dirtypatch = 1;
+foreach my $d (@dirs) {
+ if (system('cvs','add',$d)) {
+ $dirtypatch = 1;
+ warn "Failed to cvs add directory $d -- you may need to do it manually";
+ }
}
foreach my $f (@afiles) {
- set_new_file_permissions($f, $amodes{$f});
if (grep { $_ eq $f } @bfiles) {
system('cvs', 'add','-kb',$f);
} else {
system('cvs', 'add', $f);
}
if ($?) {
- $dirty = 1;
+ $dirtypatch = 1;
warn "Failed to cvs add $f -- you may need to do it manually";
}
}
@@ -285,29 +233,29 @@ foreach my $f (@afiles) {
foreach my $f (@dfiles) {
system('cvs', 'rm', '-f', $f);
if ($?) {
- $dirty = 1;
+ $dirtypatch = 1;
warn "Failed to cvs rm -f $f -- you may need to do it manually";
}
}
print "Commit to CVS\n";
-print "Patch: $title\n";
-my $commitfiles = join(' ', @afiles, @mfiles, @dfiles);
-my $cmd = "cvs commit -F .msg $commitfiles";
+print "Patch title (first comment line): $title\n";
+my @commitfiles = map { unless (m/\s/) { '\''.$_.'\''; } else { $_; }; } (@afiles, @mfiles, @dfiles);
+my $cmd = "cvs commit -F .msg @commitfiles";
if ($dirtypatch) {
print "NOTE: One or more hunks failed to apply cleanly.\n";
- print "Resolve the conflicts and then commit using:\n";
+ print "You'll need to apply the patch in .cvsexportcommit.diff manually\n";
+ print "using a patch program. After applying the patch and resolving the\n";
+ print "problems you may commit using:";
print "\n $cmd\n\n";
exit(1);
}
-
if ($opt_c) {
print "Autocommit\n $cmd\n";
print safe_pipe_capture('cvs', 'commit', '-F', '.msg', @afiles, @mfiles, @dfiles);
if ($?) {
- cleanupcvs(@files);
die "Exiting: The commit did not succeed";
}
print "Committed successfully to CVS\n";
@@ -321,17 +269,6 @@ END
exit(1);
}
-# ensure cvs is clean before we die
-sub cleanupcvs {
- my @files = @_;
- foreach my $f (@files) {
- system('cvs', '-q', 'update', '-C', $f);
- if ($?) {
- warn "Warning! Failed to cleanup state of $f\n";
- }
- }
-}
-
# An alternative to `command` that allows input to be passed as an array
# to work around shell problems with weird characters in arguments
# if the exec returns non-zero we die
@@ -346,12 +283,15 @@ sub safe_pipe_capture {
return wantarray ? @output : join('',@output);
}
-# For any file we want to add to cvs, we must first set its permissions
-# properly, *before* the "cvs add ..." command. Otherwise, it is impossible
-# to change the permission of the file in the CVS repository using only cvs
-# commands. This should be fixed in cvs-1.12.14.
-sub set_new_file_permissions {
- my ($file, $perm) = @_;
- chmod oct($perm), $file
- or die "failed to set permissions of \"$file\": $!\n";
+sub safe_pipe_capture_blob {
+ my $output;
+ if (my $pid = open my $child, '-|') {
+ local $/;
+ undef $/;
+ $output = (<$child>);
+ close $child or die join(' ',@_).": $! $?";
+ } else {
+ exec(@_) or die "$! $?"; # exec() can fail the executable can't be found
+ }
+ return $output;
}
diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh
index c102479..63eafc8 100755
--- a/t/t9200-git-cvsexportcommit.sh
+++ b/t/t9200-git-cvsexportcommit.sh
@@ -89,18 +89,17 @@ test_expect_success \
! git cvsexportcommit -c $id
)'
-# Should fail, but only on the git-cvsexportcommit stage
-test_expect_success \
- 'Fail to remove binary file more than one generation old' \
- 'git reset --hard HEAD^ &&
- cat F/newfile6.png >>D/newfile4.png &&
- git commit -a -m "generation 2 (again)" &&
- rm -f D/newfile4.png &&
- git commit -a -m "generation 3" &&
- id=$(git rev-list --max-count=1 HEAD) &&
- (cd "$CVSWORK" &&
- ! git cvsexportcommit -c $id
- )'
+#test_expect_success \
+# 'Fail to remove binary file more than one generation old' \
+# 'git reset --hard HEAD^ &&
+# cat F/newfile6.png >>D/newfile4.png &&
+# git commit -a -m "generation 2 (again)" &&
+# rm -f D/newfile4.png &&
+# git commit -a -m "generation 3" &&
+# id=$(git rev-list --max-count=1 HEAD) &&
+# (cd "$CVSWORK" &&
+# ! git cvsexportcommit -c $id
+# )'
# We reuse the state from two tests back here
@@ -108,7 +107,7 @@ # This test is here because a patch for
# fail with gnu patch, so cvsexportcommit must handle that.
test_expect_success \
'Remove only binary files' \
- 'git reset --hard HEAD^^^ &&
+ 'git reset --hard HEAD^^ &&
rm -f D/newfile4.png &&
git commit -a -m "test: remove only a binary file" &&
id=$(git rev-list --max-count=1 HEAD) &&
@@ -142,20 +141,73 @@ test_expect_success \
diff F/newfile6.png ../F/newfile6.png
)'
-test_expect_success 'Retain execute bit' '
- mkdir G &&
- echo executeon >G/on &&
- chmod +x G/on &&
- echo executeoff >G/off &&
- git add G/on &&
- git add G/off &&
- git commit -a -m "Execute test" &&
- (
- cd "$CVSWORK" &&
- git-cvsexportcommit -c HEAD
- test -x G/on &&
- ! test -x G/off
- )
-'
+test_expect_success \
+ 'New file with spaces in file name' \
+ 'mkdir "G g" &&
+ echo ok then >"G g/with spaces.txt" &&
+ git add "G g/with spaces.txt" && \
+ cp ../test9200a.png "G g/with spaces.png" && \
+ git add "G g/with spaces.png" &&
+ git commit -a -m "With spaces" &&
+ id=$(git rev-list --max-count=1 HEAD) &&
+ (cd "$CVSWORK" &&
+ git-cvsexportcommit -c $id &&
+ test "$(echo $(sort "G g/CVS/Entries"|cut -d/ -f2,3,5))" = "with spaces.png/1.1/-kb with spaces.txt/1.1/"
+ )'
+
+test_expect_success \
+ 'Update file with spaces in file name' \
+ 'echo Ok then >>"G g/with spaces.txt" &&
+ cat ../test9200a.png >>"G g/with spaces.png" && \
+ git add "G g/with spaces.png" &&
+ git commit -a -m "Update with spaces" &&
+ id=$(git rev-list --max-count=1 HEAD) &&
+ (cd "$CVSWORK" &&
+ git-cvsexportcommit -c $id
+ test "$(echo $(sort "G g/CVS/Entries"|cut -d/ -f2,3,5))" = "with spaces.png/1.2/-kb with spaces.txt/1.2/"
+ )'
+
+# This test contains ISO-8859-1 characters
+test_expect_success \
+ 'File with non-ascii file name' \
+ 'mkdir �&&
+ echo Foo >�g�ets�rdet.txt &&
+ git add �g�ets�rdet.txt &&
+ cp ../test9200a.png �g�ets�rdet.png &&
+ git add �g�ets�rdet.png &&
+ git commit -a -m "G�det s��det" && \
+ id=$(git rev-list --max-count=1 HEAD) &&
+ (cd "$CVSWORK" &&
+ git-cvsexportcommit -v -c $id &&
+ test "$(echo $(sort �CVS/Entries|cut -d/ -f2,3,5))" = "g�ets�rdet.png/1.1/-kb g�ets�rdet.txt/1.1/"
+ )'
+
+test_expect_success \
+ 'Mismatching patch should fail' \
+ 'date >>"E/newfile5.txt" &&
+ git add "E/newfile5.txt" &&
+ git commit -a -m "Update one" &&
+ date >>"E/newfile5.txt" &&
+ git add "E/newfile5.txt" &&
+ git commit -a -m "Update two" &&
+ id=$(git rev-list --max-count=1 HEAD) &&
+ (cd "$CVSWORK" &&
+ ! git-cvsexportcommit -c $id
+ )'
+
+test_expect_success \
+ 'Retain execute bit' \
+ 'mkdir G &&
+ echo executeon >G/on &&
+ chmod +x G/on &&
+ echo executeoff >G/off &&
+ git add G/on &&
+ git add G/off &&
+ git commit -a -m "Execute test" &&
+ (cd "$CVSWORK" &&
+ git-cvsexportcommit -c HEAD
+ test -x G/on &&
+ ! test -x G/off
+ )'
test_done
-
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html