On 10/28/2011 05:28 PM, Mika Fischer wrote: > Hi, > > I have an apache server that serves git repositories over https. I > have the problem that git is very slow when accessing it, as in 3 > seconds for a "git pull" that does nothing. > > I tracked the problem down to git sleeping for 50ms using select from > time to time while downloading the response of the server. In my case > this really hurts performance (see attached strace). However, with a > different https server things work quite fine. > > If I remove the select in http.c:673 (in run_active_slot), then things > are fast also with my server. > > So my questions are: > 1) What's the purpose of the select in http.c:673? Can it be removed? > 2) If it serves a useful purpose, what can be the reason that it hurts > performance so much in my case? > Do you edperience the same delay if you ssh to the server? If yes, then try to add following line to the slow https server's config file. UseDNS no The config file should have a name similair to /etc/ssh/sshd_config Is it getting any faster? -- To unsubscribe from this list: send the line "unsubscribe git" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html