On 03/31/10 18:29, Brandon Casey wrote:
> Can you run the test suite with this ksh? If it suffers from
> the same exit status behavior of ksh on IRIX and SunOS, then
> I have a patch which allows the test suite to run.
I've run a test (make test -k) on Tru64 V5.1 on today's version of Git (08641d02) plus
your ksh test patch. I haven't done any analysis yet of the tests which failed, but I'll
start looking at some of them later (particularly the first one that failed, a 'tar'
test).
Below is a diff between the output from a run on Linux and the Tru64 one
(instead of a full log), just to illustrate which ones failed.
(Is this log too much to post inline? If yes, then I'll use an attachment for any
future logs)
-Tor
(this is basically diff -u linux-x86-test-log tru64-test-log)
*** t0000-basic.sh ***
* ok 1: .git/objects should be empty after git init in an empty repo.
* ok 2: .git/objects should have 3 subdirectories.
@@ -208,9 +204,17 @@
* passed all 2 test(s)
*** t0024-crlf-archive.sh ***
* ok 1: setup
-* ok 2: tar archive
+* FAIL 2: tar archive
+
+
+ git archive --format=tar HEAD |
+ ( mkdir untarred && cd untarred && "$TAR" -xf - )
+
+ test_cmp sample untarred/sample
+
+
* ok 3: zip archive
-* passed all 3 test(s)
+* failed 1 among 3 test(s)
*** t0030-stripspace.sh ***
* ok 1: long lines without spaces should be unchanged
* ok 2: lines with spaces at the beginning should be unchanged
@@ -909,14 +913,14 @@
* ok 11: ref name 'heads/foo.lock' is not valid
* ok 12: ref name 'heads/foo@bar' is valid
* ok 13: ref name 'heads/v@{ation' is not valid
-* ok 14: ref name 'heads/foo\bar' is not valid
+* ok 14: ref name 'heads/fooar' is not valid
* ok 15: check-ref-format --branch @{-1}
* ok 16: ref name 'heads/foo' simplifies to 'heads/foo'
* ok 17: ref name 'refs///heads/foo' simplifies to 'refs/heads/foo'
* ok 18: check-ref-format --print rejects 'foo'
* ok 19: check-ref-format --print rejects 'heads/foo/../bar'
* ok 20: check-ref-format --print rejects 'heads/./foo'
-* ok 21: check-ref-format --print rejects 'heads\foo'
+* ok 21: check-ref-format --print rejects 'heads oo'
* passed all 21 test(s)
*** t1410-reflog.sh ***
* ok 1: setup
@@ -1468,7 +1472,8 @@
* passed all 6 test(s)
*** t3001-ls-files-others-exclude.sh ***
* ok 1: git ls-files --others with various exclude options.
-* ok 2: git ls-files --others with \r\n line endings.
+* ok 2: git ls-files --others with
+ line endings.
* ok 3: setup skip-worktree gitignore
* ok 4: git ls-files --others with various exclude options.
* ok 5: restore gitignore
@@ -2260,7 +2265,10 @@
* ok 7: check encoding header for eucJP
* ok 8: check encoding header for ISO-2022-JP
* ok 9: config to remove customization
-* ok 10: ISO8859-1 should be shown in UTF-8 now
+* FAIL 10: ISO8859-1 should be shown in UTF-8 now
+
+ compare_with ISO8859-1 "$TEST_DIRECTORY"/t3900/1-UTF-8.txt
+
* ok 11: eucJP should be shown in UTF-8 now
* ok 12: ISO-2022-JP should be shown in UTF-8 now
* ok 13: config to add customization
@@ -2268,7 +2276,10 @@
* ok 15: eucJP should be shown in itself now
* ok 16: ISO-2022-JP should be shown in itself now
* ok 17: config to tweak customization
-* ok 18: ISO8859-1 should be shown in UTF-8 now
+* FAIL 18: ISO8859-1 should be shown in UTF-8 now
+
+ compare_with ISO8859-1 "$TEST_DIRECTORY"/t3900/1-UTF-8.txt
+
* ok 19: eucJP should be shown in UTF-8 now
* ok 20: ISO-2022-JP should be shown in UTF-8 now
* ok 21: eucJP should be shown in eucJP now
@@ -2278,24 +2289,195 @@
* ok 25: No conversion with ISO8859-1
* ok 26: No conversion with eucJP
* ok 27: No conversion with ISO-2022-JP
-* passed all 27 test(s)
+* failed 2 among 27 test(s)
*** t3901-i18n-patch.sh ***
* ok 1: setup
-* ok 2: format-patch output (ISO-8859-1)
-* ok 3: format-patch output (UTF-8)
-* ok 4: rebase (U/U)
-* ok 5: rebase (U/L)
-* ok 6: rebase (L/L)
-* ok 7: rebase (L/U)
-* ok 8: cherry-pick(U/U)
-* ok 9: cherry-pick(L/L)
-* ok 10: cherry-pick(U/L)
-* ok 11: cherry-pick(L/U)
-* ok 12: rebase --merge (U/U)
-* ok 13: rebase --merge (U/L)
-* ok 14: rebase --merge (L/L)
-* ok 15: rebase --merge (L/U)
-* passed all 15 test(s)
+* FAIL 2: format-patch output (ISO-8859-1)
+
+ git config i18n.logoutputencoding ISO8859-1 &&
+
+ git format-patch --stdout master..HEAD^ >out-l1 &&
+ git format-patch --stdout HEAD^ >out-l2 &&
+ grep "^Content-Type: text/plain; charset=ISO8859-1" out-l1 &&
+ grep "^From: =?ISO8859-1?q?=C1=E9=ED=20=F3=FA?=" out-l1 &&
+ grep "^Content-Type: text/plain; charset=ISO8859-1" out-l2 &&
+ grep "^From: =?ISO8859-1?q?=C1=E9=ED=20=F3=FA?=" out-l2
+
+* FAIL 3: format-patch output (UTF-8)
+
+ git config i18n.logoutputencoding UTF-8 &&
+
+ git format-patch --stdout master..HEAD^ >out-u1 &&
+ git format-patch --stdout HEAD^ >out-u2 &&
+ grep "^Content-Type: text/plain; charset=UTF-8" out-u1 &&
+ grep "^From: =?UTF-8?q?=C3=81=C3=A9=C3=AD=20=C3=B3=C3=BA?=" out-u1 &&
+ grep "^Content-Type: text/plain; charset=UTF-8" out-u2 &&
+ grep "^From: =?UTF-8?q?=C3=81=C3=A9=C3=AD=20=C3=B3=C3=BA?=" out-u2
+
+* FAIL 4: rebase (U/U)
+
+ # We want the result of rebase in UTF-8
+ git config i18n.commitencoding UTF-8 &&
+
+ # The test is about logoutputencoding not affecting the
+ # final outcome -- it is used internally to generate the
+ # patch and the log.
+
+ git config i18n.logoutputencoding UTF-8 &&
+
+ # The result will be committed by GIT_COMMITTER_NAME --
+ # we want UTF-8 encoded name.
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+ git checkout -b test &&
+ git rebase master &&
+
+ check_encoding 2
+
+* FAIL 5: rebase (U/L)
+
+ git config i18n.commitencoding UTF-8 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+
+ git reset --hard side &&
+ git rebase master &&
+
+ check_encoding 2
+
+* FAIL 6: rebase (L/L)
+
+ # In this test we want ISO-8859-1 encoded commits as the result
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard side &&
+ git rebase master &&
+
+ check_encoding 2 8859
+
+* FAIL 7: rebase (L/U)
+
+ # This is pathological -- use UTF-8 as intermediate form
+ # to get ISO-8859-1 results.
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding UTF-8 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard side &&
+ git rebase master &&
+
+ check_encoding 2 8859
+
+* FAIL 8: cherry-pick(U/U)
+
+ # Both the commitencoding and logoutputencoding is set to UTF-8.
+
+ git config i18n.commitencoding UTF-8 &&
+ git config i18n.logoutputencoding UTF-8 &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+
+ git reset --hard master &&
+ git cherry-pick side^ &&
+ git cherry-pick side &&
+ git revert HEAD &&
+
+ check_encoding 3
+
+* FAIL 9: cherry-pick(L/L)
+
+ # Both the commitencoding and logoutputencoding is set to ISO-8859-1
+
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard master &&
+ git cherry-pick side^ &&
+ git cherry-pick side &&
+ git revert HEAD &&
+
+ check_encoding 3 8859
+
+* FAIL 10: cherry-pick(U/L)
+
+ # Commitencoding is set to UTF-8 but logoutputencoding is ISO-8859-1
+
+ git config i18n.commitencoding UTF-8 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+
+ git reset --hard master &&
+ git cherry-pick side^ &&
+ git cherry-pick side &&
+ git revert HEAD &&
+
+ check_encoding 3
+
+* FAIL 11: cherry-pick(L/U)
+
+ # Again, the commitencoding is set to ISO-8859-1 but
+ # logoutputencoding is set to UTF-8.
+
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding UTF-8 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard master &&
+ git cherry-pick side^ &&
+ git cherry-pick side &&
+ git revert HEAD &&
+
+ check_encoding 3 8859
+
+* FAIL 12: rebase --merge (U/U)
+
+ git config i18n.commitencoding UTF-8 &&
+ git config i18n.logoutputencoding UTF-8 &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+
+ git reset --hard side &&
+ git rebase --merge master &&
+
+ check_encoding 2
+
+* FAIL 13: rebase --merge (U/L)
+
+ git config i18n.commitencoding UTF-8 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
+
+ git reset --hard side &&
+ git rebase --merge master &&
+
+ check_encoding 2
+
+* FAIL 14: rebase --merge (L/L)
+
+ # In this test we want ISO-8859-1 encoded commits as the result
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding ISO8859-1 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard side &&
+ git rebase --merge master &&
+
+ check_encoding 2 8859
+
+* FAIL 15: rebase --merge (L/U)
+
+ # This is pathological -- use UTF-8 as intermediate form
+ # to get ISO-8859-1 results.
+ git config i18n.commitencoding ISO8859-1 &&
+ git config i18n.logoutputencoding UTF-8 &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+
+ git reset --hard side &&
+ git rebase --merge master &&
+
+ check_encoding 2 8859
+
+* failed 14 among 15 test(s)
*** t3902-quoted.sh ***
* ok 1: setup
* ok 2: check fully quoted output from ls-files
@@ -3204,11 +3386,44 @@
* ok 1: setup
* ok 2: apply in forward
* ok 3: apply in reverse
-* ok 4: setup separate repository lacking postimage
-* ok 5: apply in forward without postimage
-* ok 6: apply in reverse without postimage
+* FAIL 4: setup separate repository lacking postimage
+
+
+ git tar-tree initial initial | $TAR xf - &&
+ (
+ cd initial && git init && git add .
+ ) &&
+
+ git tar-tree second second | $TAR xf - &&
+ (
+ cd second && git init && git add .
+ )
+
+
+* FAIL 5: apply in forward without postimage
+
+
+ T0=`git rev-parse "second^{tree}"` &&
+ (
+ cd initial &&
+ git apply --index --binary ../patch &&
+ T1=`git write-tree` &&
+ test "$T0" = "$T1"
+ )
+
+* FAIL 6: apply in reverse without postimage
+
+
+ T0=`git rev-parse "initial^{tree}"` &&
+ (
+ cd second &&
+ git apply --index --binary --reverse ../patch &&
+ T1=`git write-tree` &&
+ test "$T0" = "$T1"
+ )
+
* ok 7: reversing a whitespace introduction
-* passed all 7 test(s)
+* failed 3 among 7 test(s)
*** t4117-apply-reject.sh ***
* ok 1: setup
* ok 2: apply without --reject should fail
@@ -3435,8 +3650,20 @@
*** t4201-shortlog.sh ***
* ok 1: shortlog wrapping
* ok 2: shortlog from non-git directory
-* ok 3: shortlog encoding
-* passed all 3 test(s)
+* FAIL 3: shortlog encoding
+
+ git reset --hard "$commit" &&
+ git config --unset i18n.commitencoding &&
+ echo 2 > a1 &&
+ git commit --quiet -m "$MSG1" --author="$DSCHOE" a1 &&
+ git config i18n.commitencoding "ISO8859-1" &&
+ echo 3 > a1 &&
+ git commit --quiet -m "$(iconvfromutf8toiso88591 "$MSG2")" \
+ --author="$(iconvfromutf8toiso88591 "$DSCHOE")" a1 &&
+ git config --unset i18n.commitencoding &&
+ git shortlog HEAD~2.. > out &&
+ test_cmp expect out
+* failed 1 among 3 test(s)
*** t4202-log.sh ***
* ok 1: setup
* ok 2: pretty
@@ -3515,20 +3742,45 @@
* ok 10: git archive vs. the same in a bare repo
* ok 11: git archive with --output
* ok 12: git archive --remote
-* ok 13: validate file modification time
+* FAIL 13: validate file modification time
+ mkdir extract &&
+ "$TAR" xf b.tar -C extract a/a &&
+ test-chmtime -v +0 extract/a/a |cut -f 1 >b.mtime &&
+ echo "1117231200" >expected.mtime &&
+ test_cmp expected.mtime b.mtime
* ok 14: git get-tar-commit-id
-* ok 15: extract tar archive
-* ok 16: validate filenames
-* ok 17: validate file contents
+* FAIL 15: extract tar archive
+ (cd b && "$TAR" xf -) <b.tar
+* FAIL 16: validate filenames
+ (cd b/a && find .) | sort >b.lst &&
+ test_cmp a.lst b.lst
+* FAIL 17: validate file contents
+ diff -r a b/a
* ok 18: git tar-tree with prefix
-* ok 19: extract tar archive with prefix
-* ok 20: validate filenames with prefix
-* ok 21: validate file contents with prefix
+* FAIL 19: extract tar archive with prefix
+ (cd c && "$TAR" xf -) <c.tar
+* FAIL 20: validate filenames with prefix
+ (cd c/prefix/a && find .) | sort >c.lst &&
+ test_cmp a.lst c.lst
+* FAIL 21: validate file contents with prefix
+ diff -r a c/prefix/a
* ok 22: create archives with substfiles
-* ok 23: extract substfiles
-* ok 24: validate substfile contents
-* ok 25: extract substfiles from archive with prefix
-* ok 26: validate substfile contents from archive with prefix
+* FAIL 23: extract substfiles
+ (mkdir f && cd f && "$TAR" xf -) <f.tar
+* FAIL 24: validate substfile contents
+ git log --max-count=1 "--pretty=format:A${SUBSTFORMAT}O" HEAD \
+ >f/a/substfile1.expected &&
+ test_cmp f/a/substfile1.expected f/a/substfile1 &&
+ test_cmp a/substfile2 f/a/substfile2
+
+* FAIL 25: extract substfiles from archive with prefix
+ (mkdir g && cd g && "$TAR" xf -) <g.tar
+* FAIL 26: validate substfile contents from archive with prefix
+ git log --max-count=1 "--pretty=format:A${SUBSTFORMAT}O" HEAD \
+ >g/prefix/a/substfile1.expected &&
+ test_cmp g/prefix/a/substfile1.expected g/prefix/a/substfile1 &&
+ test_cmp a/substfile2 g/prefix/a/substfile2
+
* ok 27: git archive --format=zip
* ok 28: git archive --format=zip in a bare repo
* ok 29: git archive --format=zip vs. the same in a bare repo
@@ -3543,61 +3795,215 @@
* ok 38: validate filenames with prefix
* ok 39: validate file contents with prefix
* ok 40: git archive --list outside of a git repo
-* ok 41: git-archive --prefix=olde-
-* passed all 41 test(s)
+* FAIL 41: git-archive --prefix=olde-
+
+ git archive --prefix=olde- >h.tar HEAD &&
+ (
+ mkdir h &&
+ cd h &&
+ "$TAR" xf - <../h.tar
+ ) &&
+ test -d h/olde-a &&
+ test -d h/olde-a/bin &&
+ test -f h/olde-a/bin/sh
+
+* failed 12 among 41 test(s)
*** t5001-archive-attr.sh ***
* ok 1: setup
-* ok 2: git archive
+* FAIL 2: git archive
+
+ git archive HEAD >archive.tar &&
+ (mkdir archive && cd archive && "$TAR" xf -) <archive.tar
+
* ok 3: archive/ignored does not exist
* ok 4: archive/ignored-by-tree does not exist
-* ok 5: archive/ignored-by-worktree exists
-* ok 6: git archive with worktree attributes
+* FAIL 5: archive/ignored-by-worktree exists
+ test -e archive/ignored-by-worktree
+* FAIL 6: git archive with worktree attributes
+
+ git archive --worktree-attributes HEAD >worktree.tar &&
+ (mkdir worktree && cd worktree && "$TAR" xf -) <worktree.tar
+
* ok 7: worktree/ignored does not exist
-* ok 8: worktree/ignored-by-tree exists
+* FAIL 8: worktree/ignored-by-tree exists
+ test -e worktree/ignored-by-tree
* ok 9: worktree/ignored-by-worktree does not exist
* ok 10: git archive vs. bare
-* ok 11: git archive with worktree attributes, bare
+* FAIL 11: git archive with worktree attributes, bare
+
+ (cd bare && git archive --worktree-attributes HEAD) >bare-worktree.tar &&
+ (mkdir bare-worktree && cd bare-worktree && "$TAR" xf -) <bare-worktree.tar
+
* ok 12: bare-worktree/ignored does not exist
-* ok 13: bare-worktree/ignored-by-tree exists
-* ok 14: bare-worktree/ignored-by-worktree exists
-* ok 15: export-subst
+* FAIL 13: bare-worktree/ignored-by-tree exists
+ test -e bare-worktree/ignored-by-tree
+* FAIL 14: bare-worktree/ignored-by-worktree exists
+ test -e bare-worktree/ignored-by-worktree
+* FAIL 15: export-subst
+
+ git log "--pretty=format:A${SUBSTFORMAT}O" HEAD >substfile1.expected &&
+ test_cmp nosubstfile archive/nosubstfile &&
+ test_cmp substfile1.expected archive/substfile1 &&
+ test_cmp substfile2 archive/substfile2
+
* ok 16: git tar-tree vs. git archive with worktree attributes
* ok 17: git tar-tree vs. git archive with worktree attrs, bare
-* passed all 17 test(s)
+* failed 8 among 17 test(s)
*** t5100-mailinfo.sh ***
* ok 1: split sample box
* ok 2: mailinfo 0001
* ok 3: mailinfo 0002
* ok 4: mailinfo 0003
* ok 5: mailinfo 0004
-* ok 6: mailinfo 0005
+* FAIL 6: mailinfo 0005
+
+ check_mailinfo $mail "" &&
+ if test -f "$TEST_DIRECTORY"/t5100/msg$mail--scissors
+ then
+ check_mailinfo $mail --scissors
+ fi &&
+ if test -f "$TEST_DIRECTORY"/t5100/msg$mail--no-inbody-headers
+ then
+ check_mailinfo $mail --no-inbody-headers
+ fi
+
* ok 7: mailinfo 0006
* ok 8: mailinfo 0007
* ok 9: mailinfo 0008
* ok 10: mailinfo 0009
* ok 11: mailinfo 0010
-* ok 12: mailinfo 0011
+* FAIL 12: mailinfo 0011
+
+ check_mailinfo $mail "" &&
+ if test -f "$TEST_DIRECTORY"/t5100/msg$mail--scissors
+ then
+ check_mailinfo $mail --scissors
+ fi &&
+ if test -f "$TEST_DIRECTORY"/t5100/msg$mail--no-inbody-headers
+ then
+ check_mailinfo $mail --no-inbody-headers
+ fi
+
* ok 13: mailinfo 0012
* ok 14: mailinfo 0013
* ok 15: mailinfo 0014
* ok 16: mailinfo 0015
* ok 17: mailinfo 0016
* ok 18: split box with rfc2047 samples
-* ok 19: mailinfo rfc2047/0001
-* ok 20: mailinfo rfc2047/0002
-* ok 21: mailinfo rfc2047/0003
-* ok 22: mailinfo rfc2047/0004
-* ok 23: mailinfo rfc2047/0005
-* ok 24: mailinfo rfc2047/0006
-* ok 25: mailinfo rfc2047/0007
-* ok 26: mailinfo rfc2047/0008
-* ok 27: mailinfo rfc2047/0009
-* ok 28: mailinfo rfc2047/0010
-* ok 29: mailinfo rfc2047/0011
+* FAIL 19: mailinfo rfc2047/0001
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 20: mailinfo rfc2047/0002
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 21: mailinfo rfc2047/0003
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 22: mailinfo rfc2047/0004
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 23: mailinfo rfc2047/0005
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 24: mailinfo rfc2047/0006
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 25: mailinfo rfc2047/0007
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 26: mailinfo rfc2047/0008
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 27: mailinfo rfc2047/0009
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 28: mailinfo rfc2047/0010
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
+* FAIL 29: mailinfo rfc2047/0011
+
+ git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info &&
+ echo msg &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg &&
+ echo patch &&
+ test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch &&
+ echo info &&
+ test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info
+
* ok 30: respect NULs
* ok 31: Preserve NULs out of MIME encoded message
* ok 32: mailinfo on from header without name works
-* passed all 32 test(s)
+* failed 13 among 32 test(s)
*** t5300-pack-object.sh ***
* ok 1: setup
* ok 2: pack without delta
@@ -3691,8 +4097,14 @@
* ok 21: ... but having a loose copy allows for full recovery
* ok 22: ... and then a repack "clears" the corruption
* ok 23: ... and a redundant pack allows for full recovery too
-* ok 24: corrupting header to have too small output buffer fails unpack
-* passed all 24 test(s)
+* FAIL 24: corrupting header to have too small output buffer fails unpack
+ create_new_pack &&
+ git prune-packed &&
+ printf "\262" | do_corrupt_object $blob_1 0 &&
+ test_must_fail git cat-file blob $blob_1 > /dev/null &&
+ test_must_fail git cat-file blob $blob_2 > /dev/null &&
+ test_must_fail git cat-file blob $blob_3 > /dev/null
+* failed 1 among 24 test(s)
*** t5304-prune.sh ***
* ok 1: setup
* ok 2: prune stale packs
@@ -3932,22 +4344,20 @@
* ok 14: unbundle 2
* ok 15: bundle does not prerequisite objects
* ok 16: bundle should be able to create a full history
-* ok 17: fetch via rsync
-* ok 18: push via rsync
-* ok 19: push via rsync
-* ok 20: fetch with a non-applying branch.<name>.merge
-* ok 21: quoting of a strangely named repo
-* ok 22: bundle should record HEAD correctly
-* ok 23: explicit fetch should not update tracking
-* ok 24: explicit pull should not update tracking
-* ok 25: configured fetch updates tracking
-* ok 26: pushing nonexistent branch by mistake should not segv
-* ok 27: auto tag following fetches minimum
-* ok 28: refuse to fetch into the current branch
-* ok 29: fetch into the current branch with --update-head-ok
-* ok 30: fetch --dry-run
-* ok 31: should be able to fetch with duplicate refspecs
-* passed all 31 test(s)
+* Skipping rsync tests because rsync was not found
+* ok 17: fetch with a non-applying branch.<name>.merge
+* ok 18: quoting of a strangely named repo
+* ok 19: bundle should record HEAD correctly
+* ok 20: explicit fetch should not update tracking
+* ok 21: explicit pull should not update tracking
+* ok 22: configured fetch updates tracking
+* ok 23: pushing nonexistent branch by mistake should not segv
+* ok 24: auto tag following fetches minimum
+* ok 25: refuse to fetch into the current branch
+* ok 26: fetch into the current branch with --update-head-ok
+* ok 27: fetch --dry-run
+* ok 28: should be able to fetch with duplicate refspecs
+* passed all 28 test(s)
*** t5511-refspec.sh ***
* ok 1: push (invalid)
* ok 2: push :
@@ -5191,40 +5601,41 @@
* ok 51: listing the one-line message of a non-signed tag should succeed
* ok 52: listing the zero-lines message of a non-signed tag should succeed
* ok 53: listing many message lines of a non-signed tag should succeed
-* ok 54: trying to verify an annotated non-signed tag should fail
-* ok 55: trying to verify a file-annotated non-signed tag should fail
-* ok 56: trying to verify two annotated non-signed tags should fail
-* ok 57: creating a signed tag with -m message should succeed
-* ok 58: sign with a given key id
-* ok 59: sign with an unknown id (1)
-* ok 60: sign with an unknown id (2)
-* ok 61: -u implies signed tag
-* ok 62: creating a signed tag with -F messagefile should succeed
-* ok 63: creating a signed tag with -F - should succeed
-* ok 64: -s implies annotated tag
-* ok 65: trying to create a signed tag with non-existing -F file should fail
-* ok 66: verifying a signed tag should succeed
-* ok 67: verifying two signed tags in one command should succeed
-* ok 68: verifying many signed and non-signed tags should fail
-* ok 69: verifying a forged tag should fail
-* ok 70: creating a signed tag with an empty -m message should succeed
-* ok 71: creating a signed tag with an empty -F messagefile should succeed
-* ok 72: extra blanks in the message for a signed tag should be removed
-* ok 73: creating a signed tag with a blank -m message should succeed
-* ok 74: creating a signed tag with blank -F file with spaces should succeed
-* ok 75: creating a signed tag with spaces and no newline should succeed
-* ok 76: creating a signed tag with a -F file with #comments should succeed
-* ok 77: creating a signed tag with #commented -m message should succeed
-* ok 78: creating a signed tag with #commented -F messagefile should succeed
-* ok 79: creating a signed tag with a #comment and no newline should succeed
-* ok 80: listing the one-line message of a signed tag should succeed
-* ok 81: listing the zero-lines message of a signed tag should succeed
-* ok 82: listing many message lines of a signed tag should succeed
-* ok 83: creating a signed tag pointing to a tree should succeed
-* ok 84: creating a signed tag pointing to a blob should succeed
-* ok 85: creating a signed tag pointing to another tag should succeed
-* ok 86: git tag -s fails if gpg is misconfigured
-* ok 87: verify signed tag fails when public key is not present
+* gpg not found - skipping tag signing and verification tests
+* skip 54: trying to verify an annotated non-signed tag should fail
+* skip 55: trying to verify a file-annotated non-signed tag should fail
+* skip 56: trying to verify two annotated non-signed tags should fail
+* skip 57: creating a signed tag with -m message should succeed
+* skip 58: sign with a given key id
+* skip 59: sign with an unknown id (1)
+* skip 60: sign with an unknown id (2)
+* skip 61: -u implies signed tag
+* skip 62: creating a signed tag with -F messagefile should succeed
+* skip 63: creating a signed tag with -F - should succeed
+* skip 64: -s implies annotated tag
+* skip 65: trying to create a signed tag with non-existing -F file should fail
+* skip 66: verifying a signed tag should succeed
+* skip 67: verifying two signed tags in one command should succeed
+* skip 68: verifying many signed and non-signed tags should fail
+* skip 69: verifying a forged tag should fail
+* skip 70: creating a signed tag with an empty -m message should succeed
+* skip 71: creating a signed tag with an empty -F messagefile should succeed
+* skip 72: extra blanks in the message for a signed tag should be removed
+* skip 73: creating a signed tag with a blank -m message should succeed
+* skip 74: creating a signed tag with blank -F file with spaces should succeed
+* skip 75: creating a signed tag with spaces and no newline should succeed
+* skip 76: creating a signed tag with a -F file with #comments should succeed
+* skip 77: creating a signed tag with #commented -m message should succeed
+* skip 78: creating a signed tag with #commented -F messagefile should succeed
+* skip 79: creating a signed tag with a #comment and no newline should succeed
+* skip 80: listing the one-line message of a signed tag should succeed
+* skip 81: listing the zero-lines message of a signed tag should succeed
+* skip 82: listing many message lines of a signed tag should succeed
+* skip 83: creating a signed tag pointing to a tree should succeed
+* skip 84: creating a signed tag pointing to a blob should succeed
+* skip 85: creating a signed tag pointing to another tag should succeed
+* skip 86: git tag -s fails if gpg is misconfigured
+* skip 87: verify signed tag fails when public key is not present
* ok 88: git tag -a fails if tag annotation is empty
* ok 89: message in editor has initial comment
* ok 90: overwriting an annoted tag should use its previous body
@@ -6176,160 +6587,160 @@
* ok 64: --no-bcc overrides sendemail.bcc
* passed all 64 test(s)
*** t9100-git-svn-basic.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9101-git-svn-props.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9102-git-svn-deep-rmdir.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9103-git-svn-tracked-directory-removed.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9104-git-svn-follow-parent.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9105-git-svn-commit-diff.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9106-git-svn-commit-diff-clobber.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9107-git-svn-migrate.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9108-git-svn-glob.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9109-git-svn-multi-glob.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9110-git-svn-use-svm-props.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9111-git-svn-use-svnsync-props.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9112-git-svn-md5less-file.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9113-git-svn-dcommit-new-file.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9114-git-svn-dcommit-merge.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9115-git-svn-dcommit-funky-renames.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9116-git-svn-log.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9117-git-svn-init-clone.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9118-git-svn-funky-branch-names.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9119-git-svn-info.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9120-git-svn-clone-with-percent-escapes.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9121-git-svn-fetch-renamed-dir.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9122-git-svn-author.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9123-git-svn-rebuild-with-rewriteroot.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9124-git-svn-dcommit-auto-props.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9125-git-svn-multi-glob-branch-names.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9126-git-svn-follow-deleted-readded-directory.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9127-git-svn-partial-rebuild.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9128-git-svn-cmd-branch.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9129-git-svn-i18n-commitencoding.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9130-git-svn-authors-file.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9131-git-svn-empty-symlink.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9132-git-svn-broken-symlink.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9133-git-svn-nested-git-repo.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9134-git-svn-ignore-paths.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9135-git-svn-moved-branch-empty-file.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9136-git-svn-recreated-branch-empty-file.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9137-git-svn-dcommit-clobber-series.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9138-git-svn-authors-prog.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9139-git-svn-non-utf8-commitencoding.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9140-git-svn-reset.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9141-git-svn-multiple-branches.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9142-git-svn-shallow-clone.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9143-git-svn-gc.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9144-git-svn-old-rev_map.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9145-git-svn-master-branch.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9146-git-svn-empty-dirs.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9150-svk-mergetickets.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9151-svn-mergeinfo.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9152-svn-empty-dirs-after-gc.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9153-git-svn-rewrite-uuid.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9154-git-svn-fancy-glob.sh ***
-* Perl SVN libraries not found or unusable, skipping test
+* skipping git svn tests, svn not found
* passed all 0 test(s)
*** t9200-git-cvsexportcommit.sh ***
* ok 1: New file
@@ -6473,7 +6884,22 @@
* ok 1: setup
* ok 2: fast-export | fast-import
* ok 3: fast-export master~2..master
-* ok 4: iso-8859-1
+* FAIL 4: iso-8859-1
+
+
+ git config i18n.commitencoding ISO8859-1 &&
+ # use author and committer name in ISO-8859-1 to match it.
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
+ test_tick &&
+ echo rosten >file &&
+ git commit -s -m den file &&
+ git fast-export wer^..wer |
+ sed "s/wer/i18n/" |
+ (cd new &&
+ git fast-import &&
+ git cat-file commit i18n | grep "�éà óú")
+
+
* ok 5: import/export-marks
* ok 6: set up faked signed tag
* ok 7: signed-tags=abort
@@ -6495,232 +6921,37 @@
* ok 23: tag-obj_tag
* ok 24: tag-obj_tag-obj
* still have 1 known breakage(s)
-* passed all remaining 23 test(s)
+* failed 1 among remaining 23 test(s)
*** t9400-git-cvsserver-server.sh ***
-* ok 1: setup
-* ok 2: basic checkout
-* ok 3: pserver authentication
-* ok 4: pserver authentication failure (non-anonymous user)
-* ok 5: pserver authentication (login)
-* ok 6: pserver authentication failure (login/non-anonymous user)
-* ok 7: req_Root failure (relative pathname)
-* ok 8: req_Root failure (conflicting roots)
-* ok 9: req_Root (strict paths)
-* ok 10: req_Root failure (strict-paths)
-* ok 11: req_Root (w/o strict-paths)
-* ok 12: req_Root failure (w/o strict-paths)
-* ok 13: req_Root (base-path)
-* ok 14: req_Root failure (base-path)
-* ok 15: req_Root (export-all)
-* ok 16: req_Root failure (export-all w/o whitelist)
-* ok 17: req_Root (everything together)
-* ok 18: gitcvs.enabled = false
-* ok 19: gitcvs.ext.enabled = true
-* ok 20: gitcvs.ext.enabled = false
-* ok 21: gitcvs.dbname
-* ok 22: gitcvs.ext.dbname
-* ok 23: cvs update (create new file)
-* ok 24: cvs update (update existing file)
-* still broken 25: cvs update w/o -d doesn't create subdir (TODO)
-* ok 26: cvs update (subdirectories)
-* ok 27: cvs update (delete file)
-* ok 28: cvs update (re-add deleted file)
-* ok 29: cvs update (merge)
-* ok 30: cvs update (conflict merge)
-* ok 31: cvs update (-C)
-* ok 32: cvs update (merge no-op)
-* ok 33: cvs update (-p)
-* ok 34: cvs update (module list supports packed refs)
-* ok 35: cvs status
-* ok 36: cvs status (nonrecursive)
-* ok 37: cvs status (no subdirs in header)
-* ok 38: cvs co -c (shows module database)
-* ok 39: cvs annotate
-* still have 1 known breakage(s)
-* passed all remaining 38 test(s)
+* skipping git-cvsserver tests, Perl SQLite interface unavailable
+* passed all 0 test(s)
*** t9401-git-cvsserver-crlf.sh ***
-* ok 1: setup
-* ok 2: cvs co (default crlf)
-* ok 3: cvs co (allbinary)
-* ok 4: cvs co (use attributes/allbinary)
-* ok 5: cvs co (use attributes)
-* ok 6: adding files
-* ok 7: updating
-* ok 8: cvs co (use attributes/guess)
-* ok 9: setup multi-line files
-* ok 10: cvs co (guess)
-* ok 11: cvs co another copy (guess)
-* ok 12: add text (guess)
-* ok 13: add bin (guess)
-* ok 14: remove files (guess)
-* ok 15: cvs ci (guess)
-* ok 16: update subdir of other copy (guess)
-* ok 17: update/merge full other copy (guess)
-* passed all 17 test(s)
+* skipping git-cvsserver tests, Perl SQLite interface unavailable
+* passed all 0 test(s)
*** t9500-gitweb-standalone-no-errors.sh ***
-* ok 1: no commits: projects_list (implicit)
-* ok 2: no commits: projects_index
-* ok 3: no commits: .git summary (implicit)
-* ok 4: no commits: .git commit (implicit HEAD)
-* ok 5: no commits: .git commitdiff (implicit HEAD)
-* ok 6: no commits: .git tree (implicit HEAD)
-* ok 7: no commits: .git heads
-* ok 8: no commits: .git tags
-* ok 9: Make initial commit
-* ok 10: projects_list (implicit)
-* ok 11: projects_index
-* ok 12: .git summary (implicit)
-* ok 13: .git commit (implicit HEAD)
-* ok 14: .git commitdiff (implicit HEAD, root commit)
-* ok 15: .git commitdiff_plain (implicit HEAD, root commit)
-* ok 16: .git commit (HEAD)
-* ok 17: .git tree (implicit HEAD)
-* ok 18: .git blob (file)
-* ok 19: .git blob_plain (file)
-* ok 20: .git commit (non-existent)
-* ok 21: .git commitdiff (non-existent)
-* ok 22: .git commitdiff (non-existent vs HEAD)
-* ok 23: .git tree (0000000000000000000000000000000000000000)
-* ok 24: .git tag (0000000000000000000000000000000000000000)
-* ok 25: .git blob (non-existent)
-* ok 26: .git blob_plain (non-existent)
-* ok 27: commitdiff(0): root
-* ok 28: commitdiff(0): file added
-* ok 29: commitdiff(0): mode change
-* ok 30: commitdiff(0): file renamed
-* ok 31: commitdiff(0): file to symlink
-* ok 32: commitdiff(0): file deleted
-* ok 33: commitdiff(0): file copied / new file
-* ok 34: commitdiff(0): mode change and modified
-* ok 35: commitdiff(0): renamed and modified
-* ok 36: commitdiff(0): renamed, mode change and modified
-* ok 37: setup typechange commits
-* ok 38: commitdiff(2): file renamed from foo to foo/baz
-* ok 39: commitdiff(2): file renamed from foo/baz to foo
-* ok 40: commitdiff(2): directory becomes file
-* ok 41: commitdiff(2): file becomes directory
-* ok 42: commitdiff(2): file becomes symlink
-* ok 43: commitdiff(2): symlink becomes file
-* ok 44: commitdiff(2): symlink becomes directory
-* ok 45: commitdiff(2): directory becomes symlink
-* ok 46: Create a merge
-* ok 47: commit(0): merge commit
-* ok 48: commitdiff(0): merge commit
-* ok 49: Prepare large commit
-* ok 50: commit(1): large commit
-* ok 51: commitdiff(1): large commit
-* ok 52: tags: list of different types of tags
-* ok 53: tag: Tag to commit object
-* ok 54: tag: on lightweight tag (invalid)
-* ok 55: logs: log (implicit HEAD)
-* ok 56: logs: shortlog (implicit HEAD)
-* ok 57: logs: history (implicit HEAD, file)
-* ok 58: logs: history (implicit HEAD, non-existent file)
-* ok 59: logs: history (implicit HEAD, deleted file)
-* ok 60: path_info: project
-* ok 61: path_info: project/branch
-* ok 62: path_info: project/branch:file
-* ok 63: path_info: project/branch:dir/
-* ok 64: path_info: project/branch:file (non-existent)
-* ok 65: path_info: project/branch:dir/ (non-existent)
-* ok 66: path_info: project/branch:/file
-* ok 67: path_info: project/:/file (implicit HEAD)
-* ok 68: path_info: project/:/ (implicit HEAD, top tree)
-* ok 69: feeds: OPML
-* ok 70: feed: RSS
-* ok 71: feed: Atom
-* ok 72: encode(commit): utf8
-* ok 73: encode(commit): iso-8859-1
-* ok 74: encode(log): utf-8 and iso-8859-1
-* ok 75: opt: log --no-merges
-* ok 76: opt: atom --no-merges
-* ok 77: opt: "file" history --no-merges
-* ok 78: opt: log --no-such-option (invalid option)
-* ok 79: opt: tree --no-merges (invalid option for action)
-* ok 80: URL: no project URLs, no base URL
-* ok 81: URL: project URLs via gitweb.url
-* ok 82: URL: project URLs via cloneurl file
-* ok 83: config override: projects list (implicit)
-* ok 84: config override: tree view, features not overridden in repo config
-* ok 85: config override: tree view, features disabled in repo config
-* ok 86: config override: tree view, features enabled in repo config (1)
-* ok 87: config override: tree view, features enabled in repo config (2)
-* ok 88: README.html with non-ASCII characters (utf-8)
-* passed all 88 test(s)
+* skipping gitweb tests, perl version is too old
+* passed all 0 test(s)
*** t9501-gitweb-standalone-http-status.sh ***
-* ok 1: setup
-* ok 2: snapshots: tgz only default format enabled
-* ok 3: snapshots: all enabled in default, use default disabled value
-* ok 4: snapshots: zip explicitly disabled
-* ok 5: snapshots: tgz explicitly enabled
-* ok 6: snapshots: good tree-ish id
-* ok 7: snapshots: bad tree-ish id
-* ok 8: snapshots: bad tree-ish id (tagged object)
-* ok 9: snapshots: good object id
-* ok 10: snapshots: bad object id
-* ok 11: load checking: load too high (default action)
-* passed all 11 test(s)
+* skipping gitweb tests, perl version is too old
+* passed all 0 test(s)
*** t9502-gitweb-standalone-parse-output.sh ***
-* ok 1: setup
-* ok 2: snapshot: full sha1
-* ok 3: snapshot: shortened sha1
-* ok 4: snapshot: almost full sha1
-* ok 5: snapshot: HEAD
-* ok 6: snapshot: short branch name (master)
-* ok 7: snapshot: short tag name (first)
-* ok 8: snapshot: full branch name (refs/heads/master)
-* ok 9: snapshot: full tag name (refs/tags/first)
-* ok 10: snapshot: hierarchical branch name (xx/test)
-* passed all 10 test(s)
+* skipping gitweb tests, perl version is too old
+* passed all 0 test(s)
*** t9600-cvsimport.sh ***
-* ok 1: setup cvsroot
-* ok 2: setup a cvs module
-* ok 3: import a trivial module
-* ok 4: pack refs
-* ok 5: initial import has correct .git/cvs-revisions
-* ok 6: update cvs module
-* ok 7: update git module
-* ok 8: update has correct .git/cvs-revisions
-* ok 9: update cvs module
-* ok 10: cvsimport.module config works
-* ok 11: second update has correct .git/cvs-revisions
-* ok 12: import from a CVS working tree
-* ok 13: no .git/cvs-revisions created by default
-* ok 14: test entire HEAD
-* passed all 14 test(s)
+* skipping cvsimport tests, cvsps not found
+* passed all 0 test(s)
*** t9601-cvsimport-vendor-branch.sh ***
-* ok 1: import a module with a vendor branch
-* ok 2: check HEAD out of cvs repository
-* ok 3: check master out of git repository
-* ok 4: check a file that was imported once
-* still broken 5: check a file that was imported twice
-* ok 6: check a file that was imported then modified on HEAD
-* ok 7: check a file that was imported, modified, then imported again
-* ok 8: check a file that was added to HEAD then imported
-* ok 9: a vendor branch whose tag has been removed
-* still have 1 known breakage(s)
-* passed all remaining 8 test(s)
+* skipping cvsimport tests, cvsps not found
+* passed all 0 test(s)
*** t9602-cvsimport-branches-tags.sh ***
-* ok 1: import module
-* ok 2: test branch master
-* ok 3: test branch vendorbranch
-* still broken 4: test branch B_FROM_INITIALS
-* still broken 5: test branch B_FROM_INITIALS_BUT_ONE
-* still broken 6: test branch B_MIXED
-* ok 7: test branch B_SPLIT
-* still broken 8: test tag vendortag
-* ok 9: test tag T_ALL_INITIAL_FILES
-* still broken 10: test tag T_ALL_INITIAL_FILES_BUT_ONE
-* still broken 11: test tag T_MIXED
-* still have 6 known breakage(s)
-* passed all remaining 5 test(s)
+* skipping cvsimport tests, cvsps not found
+* passed all 0 test(s)
*** t9603-cvsimport-patchsets.sh ***
-* still broken 1: import with criss cross times on revisions
-* still have 1 known breakage(s)
-* passed all remaining 0 test(s)
+* skipping cvsimport tests, cvsps not found
+* passed all 0 test(s)
*** t9700-perl-git.sh ***
* ok 1: set up test repository
-* run 2: Perl API (/usr/bin/perl /home/tor/git/git/t/t9700/test.pl)
+* run 2: Perl API (/usr/bin/perl /db02/people/tor/git/git/t/t9700/test.pl)
ok 1 - use Git;
ok 2 - open repository
ok 3 - config scalar: string
@@ -6765,20 +6996,5 @@
* ok 2: Perl API
* ok 2: no stderr: Perl API
* passed all 2 test(s)
-make aggregate-results
[...]
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html