The new test-bin directory contains wrapper scripts
for executables that will be installed into the standard
bindir. It explicitly does not contain most dashed-commands.
The scripts automatically set environment variables to run out
of the source tree, not the installed directory.
This will allow running the test suite without dashed commands in
the PATH, and provides a simplified way to run custom built git
executables without installing them first.
test-bin also contains wrappers for some test suite support executables,
where the test suite will soon make use of them.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@xxxxxxxxxxxx>
---
.gitignore | 1 +
INSTALL | 8 +++++++-
Makefile | 46 +++++++++++++++++++++++++++++++++-------------
test-bin-wrapper.sh | 13 +++++++++++++
4 files changed, 54 insertions(+), 14 deletions(-)
create mode 100644 test-bin-wrapper.sh
diff --git a/.gitignore b/.gitignore
index ac02a58..c981e4c 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,6 +10,7 @@
/git-apply
/git-archimport
/git-archive
+/test-bin/
/git-bisect
/git-bisect--helper
/git-blame
diff --git a/INSTALL b/INSTALL
index be504c9..d092d33 100644
--- a/INSTALL
+++ b/INSTALL
@@ -39,7 +39,13 @@ Issues of note:
with --disable-transition option to avoid this.
- You can use git after building but without installing if you
- wanted to. Various git commands need to find other git
+ want to.
+
+ The simplest option is to use the wrapper scripts that are built
+ and saved into `pwd`/test-bin, by either putting test-bin in your
+ PATH, or invoking the scripts in test-bin using their full paths.
+
+ Alternatively, various git commands need to find other git
commands and scripts to do their work, so you would need to
arrange a few environment variables to tell them that their
friends will be found in your built source area instead of at
diff --git a/Makefile b/Makefile
index 5a0b3d4..e153ff0 100644
--- a/Makefile
+++ b/Makefile
@@ -416,6 +416,15 @@ ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
# what 'all' will build but not install in gitexecdir
OTHER_PROGRAMS = git$X
+# what test wrappers are needed and 'install' will install, in bindir
+BINDIR_PROGRAMS_NEED_X += git
+BINDIR_PROGRAMS_NEED_X += git-upload-pack
+BINDIR_PROGRAMS_NEED_X += git-receive-pack
+BINDIR_PROGRAMS_NEED_X += git-upload-archive
+BINDIR_PROGRAMS_NEED_X += git-shell
+
+BINDIR_PROGRAMS_NO_X += git-cvsserver
+
# Set paths to tools early so that they can be used for version tests.
ifndef SHELL_PATH
SHELL_PATH = /bin/sh
@@ -1690,19 +1699,27 @@ endif
### Testing rules
-TEST_PROGRAMS += test-chmtime$X
-TEST_PROGRAMS += test-ctype$X
-TEST_PROGRAMS += test-date$X
-TEST_PROGRAMS += test-delta$X
-TEST_PROGRAMS += test-dump-cache-tree$X
-TEST_PROGRAMS += test-genrandom$X
-TEST_PROGRAMS += test-match-trees$X
-TEST_PROGRAMS += test-parse-options$X
-TEST_PROGRAMS += test-path-utils$X
-TEST_PROGRAMS += test-sha1$X
-TEST_PROGRAMS += test-sigchain$X
+TEST_PROGRAMS_NEED_X += test-chmtime
+TEST_PROGRAMS_NEED_X += test-ctype
+TEST_PROGRAMS_NEED_X += test-date
+TEST_PROGRAMS_NEED_X += test-delta
+TEST_PROGRAMS_NEED_X += test-dump-cache-tree
+TEST_PROGRAMS_NEED_X += test-genrandom
+TEST_PROGRAMS_NEED_X += test-match-trees
+TEST_PROGRAMS_NEED_X += test-parse-options
+TEST_PROGRAMS_NEED_X += test-path-utils
+TEST_PROGRAMS_NEED_X += test-sha1
+TEST_PROGRAMS_NEED_X += test-sigchain
+
+TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
-all:: $(TEST_PROGRAMS)
+test_bindir_programs := $(patsubst %,test-bin/%,$(BINDIR_PROGRAMS_NEED_X) $(BINDIR_PROGRAMS_NO_X) $(TEST_PROGRAMS_NEED_X))
+
+all:: $(TEST_PROGRAMS) $(test_bindir_programs)
+
+test-bin/%: test-bin-wrapper.sh GIT-CFLAGS
+ @mkdir -p test-bin
+ $(QUIET_GEN)sed -e 's|__GIT_EXEC_PATH__|$(shell pwd)|' -e 's|__PROG__|$(@F)|' < $< > $@ && chmod +x $@
# GNU make supports exporting all variables by "export" without parameters.
# However, the environment gets quite big, and some programs have problems
@@ -1763,11 +1780,13 @@ endif
gitexec_instdir_SQ = $(subst ','\'',$(gitexec_instdir))
export gitexec_instdir
+install_bindir_programs := $(patsubst %,%$X,$(BINDIR_PROGRAMS_NEED_X)) $(BINDIR_PROGRAMS_NO_X)
+
install: all
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
- $(INSTALL) git$X git-upload-pack$X git-receive-pack$X git-upload-archive$X git-shell$X git-cvsserver '$(DESTDIR_SQ)$(bindir_SQ)'
+ $(INSTALL) $(install_bindir_programs) '$(DESTDIR_SQ)$(bindir_SQ)'
$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
ifndef NO_PERL
$(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
@@ -1878,6 +1897,7 @@ clean:
$(LIB_FILE) $(XDIFF_LIB)
$(RM) $(ALL_PROGRAMS) $(BUILT_INS) git$X
$(RM) $(TEST_PROGRAMS)
+ $(RM) -r test-bin
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
$(RM) -r autom4te.cache
$(RM) config.log config.mak.autogen config.mak.append config.status config.cache
diff --git a/test-bin-wrapper.sh b/test-bin-wrapper.sh
new file mode 100644
index 0000000..a01eee1
--- /dev/null
+++ b/test-bin-wrapper.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+# test-bin-wrapper.sh: Template for git executable wrapper scripts
+# to run test suite against sandbox, but with only bindir-installed
+# executables in PATH. The Makefile copies this into various
+# files in test-bin, substituting __GIT_EXEC_PATH__ and __PROG__.
+
+GIT_EXEC_PATH="__GIT_EXEC_PATH__"
+GIT_TEMPLATE_DIR="__GIT_EXEC_PATH__/templates/blt"
+GITPERLLIB="__GIT_EXEC_PATH__/perl/blib/lib"
+export GIT_EXEC_PATH GIT_TEMPLATE_DIR GITPERLLIB
+
+exec "${GIT_EXEC_PATH}/__PROG__" "$@"
--
1.6.4.GIT
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html