fyi this is a patch
astubbs wrote:
>
> OK, I have it running now - didn't know exec takes all command line
> arguments as a list. So here's the patch. It's not finished importing
> yet - it will probably take a while, but I'll report back once it's
> done.
>
> From 7394424e9892feb4a1274a7c57a11fd81af5a31a Mon Sep 17 00:00:00 2001
> From: Antony Stubbs <antony.stubbs@xxxxxxxxx>
> Date: Sun, 5 Jul 2009 18:09:32 +1200
> Subject: [PATCH] migrate to internal git * commands
>
> ---
> git-cvsimport.perl | 64 +++++++++++++++++++++++++
> +--------------------------
> 1 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/git-cvsimport.perl b/git-cvsimport.perl
> index e439202..80c9710 100755
> --- a/git-cvsimport.perl
> +++ b/git-cvsimport.perl
> @@ -560,16 +560,16 @@ $orig_git_index = $ENV{GIT_INDEX_FILE} if exists
> $ENV{GIT_INDEX_FILE};
> my %index; # holds filenames of one index per branch
>
> unless (-d $git_dir) {
> - system("git-init");
> + system("git", "init");
> die "Cannot init the GIT db at $git_tree: $?\n" if $?;
> - system("git-read-tree");
> + system("git", "read-tree");
> die "Cannot init an empty tree: $?\n" if $?;
>
> $last_branch = $opt_o;
> $orig_branch = "";
> } else {
> - open(F, "git-symbolic-ref HEAD |") or
> - die "Cannot run git-symbolic-ref: $!\n";
> + open(F, "git symbolic-ref HEAD |") or
> + die "Cannot run git symbolic-ref: $!\n";
> chomp ($last_branch = <F>);
> $last_branch = basename($last_branch);
> close(F);
> @@ -578,12 +578,12 @@ unless (-d $git_dir) {
> $last_branch = "master";
> }
> $orig_branch = $last_branch;
> - $tip_at_start = `git-rev-parse --verify HEAD`;
> + $tip_at_start = `git rev-parse --verify HEAD`;
>
> # Get the last import timestamps
> my $fmt = '($ref, $author) = (%(refname), %(author));';
> - open(H, "git-for-each-ref --perl --format='$fmt' $remote |") or
> - die "Cannot run git-for-each-ref: $!\n";
> + open(H, "git for-each-ref --perl --format='$fmt' $remote |") or
> + die "Cannot run git for-each-ref: $!\n";
> while (defined(my $entry = <H>)) {
> my ($ref, $author);
> eval($entry) || die "cannot eval refs list: $@";
> @@ -638,7 +638,7 @@ unless ($opt_P) {
> print $cvspsfh $_;
> }
> close CVSPS;
> - $? == 0 or die "git-cvsimport: fatal: cvsps reported error\n";
> + $? == 0 or die "git cvsimport: fatal: cvsps reported error\n";
> close $cvspsfh;
> } else {
> $cvspsfile = $opt_P;
> @@ -667,27 +667,27 @@ my $state = 0;
> sub update_index (\@\@) {
> my $old = shift;
> my $new = shift;
> - open(my $fh, '|-', qw(git-update-index -z --index-info))
> - or die "unable to open git-update-index: $!";
> + open(my $fh, '|-', qw(git update-index -z --index-info))
> + or die "unable to open git update-index: $!";
> print $fh
> (map { "0 0000000000000000000000000000000000000000\t$_\0" }
> @$old),
> (map { '100' . sprintf('%o', $_->[0]) . " $_->[1]\t$_->[2]\0" }
> @$new)
> - or die "unable to write to git-update-index: $!";
> + or die "unable to write to git update-index: $!";
> close $fh
> - or die "unable to write to git-update-index: $!";
> - $? and die "git-update-index reported error: $?";
> + or die "unable to write to git update-index: $!";
> + $? and die "git update-index reported error: $?";
> }
>
> sub write_tree () {
> - open(my $fh, '-|', qw(git-write-tree))
> - or die "unable to open git-write-tree: $!";
> + open(my $fh, '-|', qw(git write-tree))
> + or die "unable to open git write-tree: $!";
> chomp(my $tree = <$fh>);
> is_sha1($tree)
> or die "Cannot get tree id ($tree): $!";
> close($fh)
> - or die "Error running git-write-tree: $?\n";
> + or die "Error running git write-tree: $?\n";
> print "Tree ID $tree\n" if $opt_v;
> return $tree;
> }
> @@ -702,7 +702,7 @@ sub commit {
> if ($branch eq $opt_o && !$index{branch} &&
> !get_headref("$remote/$branch")) {
> # looks like an initial commit
> - # use the index primed by git-init
> + # use the index primed by git init
> $ENV{GIT_INDEX_FILE} = "$git_dir/index";
> $index{$branch} = "$git_dir/index";
> } else {
> @@ -712,9 +712,9 @@ sub commit {
> $index{$branch} = tmpnam();
> $ENV{GIT_INDEX_FILE} = $index{$branch};
> if ($ancestor) {
> - system("git-read-tree", "$remote/$ancestor");
> + system("git", "read-tree", "$remote/$ancestor");
> } else {
> - system("git-read-tree", "$remote/$branch");
> + system("git", "read-tree", "$remote/$branch");
> }
> die "read-tree failed: $?\n" if $?;
> }
> @@ -749,7 +749,7 @@ sub commit {
> $ENV{GIT_COMMITTER_EMAIL} = $author_email;
> $ENV{GIT_COMMITTER_DATE} = $commit_date;
> my $pid = open2(my $commit_read, my $commit_write,
> - 'git-commit-tree', $tree, @commit_args);
> + 'git', 'commit-tree', $tree, @commit_args);
>
> # compatibility with git2cvs
> substr($logmsg,32767) = "" if length($logmsg) > 32767;
> @@ -762,7 +762,7 @@ sub commit {
> }
>
> print($commit_write "$logmsg\n") && close($commit_write)
> - or die "Error writing to git-commit-tree: $!\n";
> + or die "Error writing to git commit-tree: $!\n";
>
> print "Committed patch $patchset ($branch $commit_date)\n" if $opt_v;
> chomp(my $cid = <$commit_read>);
> @@ -771,9 +771,9 @@ sub commit {
> close($commit_read);
>
> waitpid($pid,0);
> - die "Error running git-commit-tree: $?\n" if $?;
> + die "Error running git commit-tree: $?\n" if $?;
>
> - system('git-update-ref', "$remote/$branch", $cid) == 0
> + system('git', 'update-ref', "$remote/$branch", $cid) == 0
> or die "Cannot write branch $branch for update: $!\n";
>
> if ($tag) {
> @@ -783,7 +783,7 @@ sub commit {
> $xtag =~ s/[\/]/$opt_s/g;
> $xtag =~ s/\[//g;
>
> - system('git-tag', '-f', $xtag, $cid) == 0
> + system('git', 'tag', '-f', $xtag, $cid) == 0
> or die "Cannot create tag $xtag: $!\n";
>
> print "Created tag '$xtag' on '$branch'\n" if $opt_v;
> @@ -920,7 +920,7 @@ while (<CVS>) {
> my $pid = open(my $F, '-|');
> die $! unless defined $pid;
> if (!$pid) {
> - exec("git-hash-object", "-w", $tmpname)
> + exec("git", "hash-object", "-w", $tmpname)
> or die "Cannot create object: $!\n";
> }
> my $sha = <$F>;
> @@ -964,7 +964,7 @@ unless ($opt_P) {
> # The heuristic of repacking every 1024 commits can leave a
> # lot of unpacked data. If there is more than 1MB worth of
> # not-packed objects, repack once more.
> -my $line = `git-count-objects`;
> +my $line = `git count-objects`;
> if ($line =~ /^(\d+) objects, (\d+) kilobytes$/) {
> my ($n_objects, $kb) = ($1, $2);
> 1024 < $kb
> @@ -989,26 +989,26 @@ if ($orig_branch) {
> if ($opt_i) {
> exit 0;
> }
> - my $tip_at_end = `git-rev-parse --verify HEAD`;
> + my $tip_at_end = `git rev-parse --verify HEAD`;
> if ($tip_at_start ne $tip_at_end) {
> for ($tip_at_start, $tip_at_end) { chomp; }
> print "Fetched into the current branch.\n" if $opt_v;
> - system(qw(git-read-tree -u -m),
> + system(qw(git read-tree -u -m),
> $tip_at_start, $tip_at_end);
> die "Fast-forward update failed: $?\n" if $?;
> }
> else {
> - system(qw(git-merge cvsimport HEAD), "$remote/$opt_o");
> + system(qw(git merge cvsimport HEAD), "$remote/$opt_o");
> die "Could not merge $opt_o into the current branch.\n" if $?;
> }
> } else {
> $orig_branch = "master";
> print "DONE; creating $orig_branch branch\n" if $opt_v;
> - system("git-update-ref", "refs/heads/master", "$remote/$opt_o")
> + system("git", "update-ref", "refs/heads/master", "$remote/$opt_o")
> unless defined get_headref('refs/heads/master');
> - system("git-symbolic-ref", "$remote/HEAD", "$remote/$opt_o")
> + system("git", "symbolic-ref", "$remote/HEAD", "$remote/$opt_o")
> if ($opt_r && $opt_o ne 'HEAD');
> - system('git-update-ref', 'HEAD', "$orig_branch");
> + system('git', 'update-ref', 'HEAD', "$orig_branch");
> unless ($opt_i) {
> system('git checkout -f');
> die "checkout failed: $?\n" if $?;
> --
> 1.6.3.1
>
>
>
>
> Regards,
> Antony Stubbs
>
> Talk to me about Wicket, Spring, Maven consulting, small scale
> outsourcing to Australasia and India and Open Source development!
>
> Website: http://sharca.com
> Blog: http://stubbisms.wordpress.com
> Linked In: http://www.linkedin.com/in/antonystubbs
> Podcast: http://www.illegalargument.com
>
> On 5/07/2009, at 2:43 PM, Antony Stubbs wrote:
>
>> I've got a new install from mac-ports and am having trouble with cvs
>> import not finding the plumbing commands.
>>
>> It seems that cvsimport still uses all the old style git-hash-object
>> type commands, instead of the new " git hash-object" command style.
>> And on my system, I don't have any of the old style commands.
>>
>> I'm working on patching cvsimport to the new style, but would
>> appreicate anyone pointing out anything I'm missing...
>>
>> If i am indeed correct, then a little help with this would be great
>> (I'm not a perl programmer):
>>
>> diff --git a/git-cvsimport.perl b/git-cvsimport.perl
>> index e439202..de40933 100755
>> --- a/git-cvsimport.perl
>> +++ b/git-cvsimport.perl
>> @@ -920,7 +920,7 @@ while (<CVS>) {
>> my $pid = open(my $F, '-|');
>> die $! unless defined $pid;
>> if (!$pid) {
>> - exec("git-hash-object", "-w", $tmpname)
>> + exec("git", "hash-object -w", $tmpname)
>> or die "Cannot create object: $!\n";
>> }
>> my $sha = <$F>;
>>
>> git: 'hash-object -w' is not a git-command. See 'git --help'.
>>
>> Regards,
>> Antony Stubbs
>>
>> Talk to me about Wicket, Spring, Maven consulting, small scale
>> outsourcing to Australasia and India and Open Source development!
>>
>> Website: http://sharca.com
>> Blog: http://stubbisms.wordpress.com
>> Linked In: http://www.linkedin.com/in/antonystubbs
>> Podcast: http://www.illegalargument.com
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe git" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
View this message in context: http://n2.nabble.com/cvs-import-and-internal-plumbing-commands-tp3207876p3212716.html
Sent from the git mailing list archive at Nabble.com.
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html