Hi, The "Auto" button on the Levels dialog has a fixed behaviour today (which I don't know exactly which is). Its behaviour should be configurable by the user. Here are two possible behaviours that should be available (maybe there are more, I'm not sure): - choose the exact darker and lighter pixels as the black and white point targets respectively - choose the darker and lighter pixel for the black and white point targets after discarding a configurable percentage of the darker and lighter pixels first. I.e., to choose the black point target, first discard the x % darker pixels and them choose the darker pixel on the remaining ones. x here would be a configurable parameter. The same process would be used for the white point target. The configurable value of discarded pixels for black and white point target automatic selection should be independent of one another. The first behaviour can probably be considered an special case of the second where the configurable percentage of discarded pixels for both black and white points is set to zero. The user interface for this functionality could be accessed by the user double clicking the "Auto" button. Regards, Rodrigo Severo -- *Rodrigo Severo* | DIRETOR DE TECNOLOGIA Tel. *+55 61 3030-1515* Siga a Fábrica no twitter:*@empautaclipping* fabricadeideias.com <http://www.fabricadeideias.com/> 12 ANOS DE TECNOLOGIA E COMUNICAÇÃO NUMA COMBINAÇÃO PERFEITA _______________________________________________ gimp-developer-list mailing list List address: gimp-developer-list@xxxxxxxxx List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
