On Mon, Nov 18, 2019 at 03:53:00PM +0000, Richard Earnshaw (lists) wrote:
> On 16/11/2019 23:07, Israr Sayed wrote:
> > On Tue, Nov 12, 2019 at 10:00:08AM +0000, Richard Earnshaw (lists) wrote:
> > > On 11/11/2019 17:49, Israr Sayed wrote:
> > > > As per your instructions i tried to build the GCC.I got the following errors:
> > > > /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages:
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0'
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0'
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}'
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-'
> > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section}
> > > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant
> > > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant
> > > > make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1
> > > > make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc'
> > > > make[2]: *** [Makefile:1210: multi-do] Error 1
> > > > make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc'
> > > > make[1]: *** [Makefile:127: all-multi] Error 2
> > > > make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc'
> > > > make: *** [Makefile:12499: all-target-libgcc] Error 2
> > > > ----------------------------------------------------------
> > > > Config.log:
> > > > This file contains any messages produced by compilers while
> > > > running configure, to aid debugging if configure makes a mistake.
> > > >
> > > > It was created by configure, which was
> > > > generated by GNU Autoconf 2.69. Invocation command line was
> > > >
> > > > $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile
> > > >
> > >
> > > Sorry, I should have said that these multilib configs have only been tested
> > > with bare metal tools (arm-none-eabi). The error you are seeing is because
> > > the Linux configurations assume that the Arm instruction set exists and on
> > > M-profile devices this is not true.
> > >
> > > Standard linux configurations also assume the presence of an MMU and no
> > > M-profile devices support this.
> > >
> > > R.
> > >
> >
> > So, both the 2 conditions i.e. ARM Instructions Set and presence of MMU, M and R Profile devices Lack.
> > Onyly ARMv7-A Profile Devices have both the capabilities.
> > So, My Question is ,Is it then possible to build the GCC with Multilib for A Profile devices,
> > Using --with-multilib-list=aprofile ?
> >
>
> That should certainly work for bare-metal configurations (eg arm-none-eabi);
> that's the intended use case. It may work for arm-linux-gnueabi
> configurations as well, but I haven't tried that.
>
> R.
I will definitely try to build GCC --with-multilib-list=aprofile and come back to you soon.
Thanks
>
> > > > ## --------- ##
> > > > ## Platform. ##
> > > > ## --------- ##
> > > >
> > > > hostname = hib
> > > > uname -m = x86_64
> > > > uname -r = 5.3.0-19-generic
> > > > uname -s = Linux
> > > > uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019
> > > >
> > > > /usr/bin/uname -p = x86_64
> > > > /bin/uname -X = unknown
> > > >
> > > > /bin/arch = x86_64
> > > > /usr/bin/arch -k = unknown
> > > > /usr/convex/getsysinfo = unknown
> > > > /usr/bin/hostinfo = unknown
> > > > /bin/machine = unknown
> > > > /usr/bin/oslevel = unknown
> > > > /bin/universe = unknown
> > > >
> > > > PATH: /mnt/clfs/cross-tools/bin
> > > > PATH: /bin
> > > > PATH: /usr/bin
> > > >
> > > >
> > > > ## ----------- ##
> > > > ## Core tests. ##
> > > > ## ----------- ##
> > > >
> > > > configure:2348: checking build system type
> > > > configure:2362: result: x86_64-cross-linux-gnu
> > > > configure:2409: checking host system type
> > > > configure:2422: result: x86_64-cross-linux-gnu
> > > > configure:2442: checking target system type
> > > > configure:2455: result: arm-unknown-linux-musleabihf
> > > > configure:2509: checking for a BSD-compatible install
> > > > configure:2577: result: /bin/install -c
> > > > configure:2588: checking whether ln works
> > > > configure:2610: result: yes
> > > > configure:2614: checking whether ln -s works
> > > > configure:2618: result: yes
> > > > configure:2625: checking for a sed that does not truncate output
> > > > configure:2689: result: /bin/sed
> > > > configure:2698: checking for gawk
> > > > configure:2714: found /bin/gawk
> > > > configure:2725: result: gawk
> > > > configure:3257: checking for libitm support
> > > > configure:3267: result: yes
> > > > configure:3276: checking for libsanitizer support
> > > > configure:3286: result: yes
> > > > configure:3295: checking for libvtv support
> > > > configure:3305: result: yes
> > > > configure:3315: checking for libhsail-rt support
> > > > configure:3321: result: no
> > > > configure:3406: checking for libphobos support
> > > > configure:3416: result: yes
> > > > configure:4036: checking for x86_64-cross-linux-gnu-gcc
> > > > configure:4066: result: no
> > > > configure:4076: checking for gcc
> > > > configure:4092: found /bin/gcc
> > > > configure:4103: result: gcc
> > > > configure:4332: checking for C compiler version
> > > > configure:4341: gcc --version >&5
> > > > gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
> > > > Copyright (C) 2019 Free Software Foundation, Inc.
> > > > This is free software; see the source for copying conditions. There is NO
> > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > > >
> > > > configure:4352: $? = 0
> > > > configure:4341: gcc -v >&5
> > > > Using built-in specs.
> > > > COLLECT_GCC=gcc
> > > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper
> > > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa
> > > > OFFLOAD_TARGET_DEFAULT=1
> > > > Target: x86_64-linux-gnu
> > > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
> > > > Thread model: posix
> > > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)
> > > > configure:4352: $? = 0
> > > > configure:4341: gcc -V >&5
> > > > gcc: error: unrecognized command line option '-V'
> > > > gcc: fatal error: no input files
> > > > compilation terminated.
> > > > configure:4352: $? = 1
> > > > configure:4341: gcc -qversion >&5
> > > > gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
> > > > gcc: fatal error: no input files
> > > > compilation terminated.
> > > > configure:4352: $? = 1
> > > > configure:4372: checking whether the C compiler works
> > > > configure:4394: gcc conftest.c >&5
> > > > configure:4398: $? = 0
> > > > configure:4446: result: yes
> > > > configure:4449: checking for C compiler default output file name
> > > > configure:4451: result: a.out
> > > > configure:4457: checking for suffix of executables
> > > > configure:4464: gcc -o conftest conftest.c >&5
> > > > configure:4468: $? = 0
> > > > configure:4490: result:
> > > > configure:4512: checking whether we are cross compiling
> > > > configure:4520: gcc -o conftest conftest.c >&5
> > > > configure:4524: $? = 0
> > > > configure:4531: ./conftest
> > > > configure:4535: $? = 0
> > > > configure:4523: result: no
> > > > configure:4528: checking for suffix of object files
> > > > configure:4550: gcc -c conftest.c >&5
> > > > configure:4554: $? = 0
> > > > configure:4575: result: o
> > > > configure:4579: checking whether we are using the GNU C compiler
> > > > configure:4598: gcc -c conftest.c >&5
> > > > configure:4598: $? = 0
> > > > configure:4607: result: yes
> > > > configure:4616: checking whether gcc accepts -g
> > > > configure:4636: gcc -c -g conftest.c >&5
> > > > configure:4636: $? = 0
> > > > configure:4677: result: yes
> > > > configure:4694: checking for gcc option to accept ISO C89
> > > > configure:4757: gcc -c -g -O2 conftest.c >&5
> > > > configure:4757: $? = 0
> > > > configure:4770: result: none needed
> > > > configure:4804: checking for x86_64-cross-linux-gnu-g++
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-c++
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-gpp
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-aCC
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-CC
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-cxx
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-cc++
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-cl.exe
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-FCC
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-KCC
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-RCC
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-xlC_r
> > > > configure:4834: result: no
> > > > configure:4804: checking for x86_64-cross-linux-gnu-xlC
> > > > configure:4834: result: no
> > > > configure:4848: checking for g++
> > > > configure:4864: found /bin/g++
> > > > configure:4875: result: g++
> > > > configure:4902: checking for C++ compiler version
> > > > configure:4911: g++ --version >&5
> > > > g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
> > > > Copyright (C) 2019 Free Software Foundation, Inc.
> > > > This is free software; see the source for copying conditions. There is NO
> > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > > >
> > > > configure:4922: $? = 0
> > > > configure:4911: g++ -v >&5
> > > > Using built-in specs.
> > > > COLLECT_GCC=g++
> > > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper
> > > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa
> > > > OFFLOAD_TARGET_DEFAULT=1
> > > > Target: x86_64-linux-gnu
> > > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
> > > > Thread model: posix
> > > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)
> > > > configure:4922: $? = 0
> > > > configure:4911: g++ -V >&5
> > > > g++: error: unrecognized command line option '-V'
> > > > g++: fatal error: no input files
> > > > compilation terminated.
> > > > configure:4922: $? = 1
> > > > configure:4911: g++ -qversion >&5
> > > > g++: error: unrecognized command line option '-qversion'; did you mean '--version'?
> > > > g++: fatal error: no input files
> > > > compilation terminated.
> > > > configure:4922: $? = 1
> > > > configure:4926: checking whether we are using the GNU C++ compiler
> > > > configure:4945: g++ -c conftest.cpp >&5
> > > > configure:4945: $? = 0
> > > > configure:4954: result: yes
> > > > configure:4963: checking whether g++ accepts -g
> > > > configure:4983: g++ -c -g conftest.cpp >&5
> > > > configure:4983: $? = 0
> > > > configure:5024: result: yes
> > > > configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc
> > > > configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5
> > > > configure:5090: $? = 0
> > > > configure:5091: result: yes
> > > > configure:5115: checking for x86_64-cross-linux-gnu-gnatbind
> > > > configure:5145: result: no
> > > > configure:5155: checking for gnatbind
> > > > configure:5185: result: no
> > > > configure:5207: checking for x86_64-cross-linux-gnu-gnatmake
> > > > configure:5237: result: no
> > > > configure:5247: checking for gnatmake
> > > > configure:5277: result: no
> > > > configure:5296: checking whether compiler driver understands Ada
> > > > configure:5319: result: no
> > > > configure:5328: checking how to compare bootstrapped objects
> > > > configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2
> > > > configure:5413: checking for objdir
> > > > configure:5428: result: .libs
> > > > configure:5976: checking for isl 0.15 or later
> > > > configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5
> > > > conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory
> > > > 10 | #include <isl/schedule.h>
> > > > | ^~~~~~~~~~~~~~~~
> > > > compilation terminated.
> > > > configure:5989: $? = 1
> > > > configure: failed program was:
> > > > | /* confdefs.h */
> > > > | #define PACKAGE_NAME ""
> > > > | #define PACKAGE_TARNAME ""
> > > > | #define PACKAGE_VERSION ""
> > > > | #define PACKAGE_STRING ""
> > > > | #define PACKAGE_BUGREPORT ""
> > > > | #define PACKAGE_URL ""
> > > > | #define LT_OBJDIR ".libs/"
> > > > | /* end confdefs.h. */
> > > > | #include <isl/schedule.h>
> > > > | int
> > > > | main ()
> > > > | {
> > > > | isl_options_set_schedule_serialize_sccs (NULL, 0);
> > > > | ;
> > > > | return 0;
> > > > | }
> > > > configure:5996: result: no
> > > > configure:6000: result: required isl version is 0.15 or later
> > > > configure:7093: checking for default BUILD_CONFIG
> > > > configure:7125: result:
> > > > configure:7130: checking for --enable-vtable-verify
> > > > configure:7143: result: no
> > > > configure:7744: checking for bison
> > > > configure:7760: found /bin/bison
> > > > configure:7771: result: bison -y
> > > > configure:7791: checking for bison
> > > > configure:7807: found /bin/bison
> > > > configure:7818: result: bison
> > > > configure:7838: checking for gm4
> > > > configure:7868: result: no
> > > > configure:7838: checking for gnum4
> > > > configure:7868: result: no
> > > > configure:7838: checking for m4
> > > > configure:7854: found /bin/m4
> > > > configure:7865: result: m4
> > > > configure:7885: checking for flex
> > > > configure:7901: found /bin/flex
> > > > configure:7912: result: flex
> > > > configure:7933: checking for flex
> > > > configure:7949: found /bin/flex
> > > > configure:7960: result: flex
> > > > configure:7980: checking for makeinfo
> > > > configure:7996: found /bin/makeinfo
> > > > configure:8007: result: makeinfo
> > > > configure:8041: checking for expect
> > > > configure:8057: found /bin/expect
> > > > configure:8068: result: expect
> > > > configure:8090: checking for runtest
> > > > configure:8120: result: no
> > > > configure:8196: checking for x86_64-cross-linux-gnu-ar
> > > > configure:8226: result: no
> > > > configure:8235: checking for ar
> > > > configure:8251: found /bin/ar
> > > > configure:8262: result: ar
> > > > configure:8337: checking for x86_64-cross-linux-gnu-as
> > > > configure:8367: result: no
> > > > configure:8376: checking for as
> > > > configure:8392: found /bin/as
> > > > configure:8403: result: as
> > > > configure:8478: checking for x86_64-cross-linux-gnu-dlltool
> > > > configure:8508: result: no
> > > > configure:8517: checking for dlltool
> > > > configure:8547: result: no
> > > > configure:8619: checking for x86_64-cross-linux-gnu-ld
> > > > configure:8649: result: no
> > > > configure:8658: checking for ld
> > > > configure:8674: found /bin/ld
> > > > configure:8685: result: ld
> > > > configure:8760: checking for x86_64-cross-linux-gnu-lipo
> > > > configure:8790: result: no
> > > > configure:8799: checking for lipo
> > > > configure:8829: result: no
> > > > configure:8901: checking for x86_64-cross-linux-gnu-nm
> > > > configure:8931: result: no
> > > > configure:8940: checking for nm
> > > > configure:8956: found /bin/nm
> > > > configure:8967: result: nm
> > > > configure:9042: checking for x86_64-cross-linux-gnu-ranlib
> > > > configure:9072: result: no
> > > > configure:9081: checking for ranlib
> > > > configure:9097: found /bin/ranlib
> > > > configure:9108: result: ranlib
> > > > configure:9178: checking for x86_64-cross-linux-gnu-strip
> > > > configure:9208: result: no
> > > > configure:9217: checking for strip
> > > > configure:9233: found /bin/strip
> > > > configure:9244: result: strip
> > > > configure:9314: checking for x86_64-cross-linux-gnu-windres
> > > > configure:9344: result: no
> > > > configure:9353: checking for windres
> > > > configure:9383: result: no
> > > > configure:9455: checking for x86_64-cross-linux-gnu-windmc
> > > > configure:9485: result: no
> > > > configure:9494: checking for windmc
> > > > configure:9524: result: no
> > > > configure:9596: checking for x86_64-cross-linux-gnu-objcopy
> > > > configure:9626: result: no
> > > > configure:9635: checking for objcopy
> > > > configure:9651: found /bin/objcopy
> > > > configure:9662: result: objcopy
> > > > configure:9737: checking for x86_64-cross-linux-gnu-objdump
> > > > configure:9767: result: no
> > > > configure:9776: checking for objdump
> > > > configure:9792: found /bin/objdump
> > > > configure:9803: result: objdump
> > > > configure:9878: checking for x86_64-cross-linux-gnu-otool
> > > > configure:9908: result: no
> > > > configure:9917: checking for otool
> > > > configure:9947: result: no
> > > > configure:10019: checking for x86_64-cross-linux-gnu-readelf
> > > > configure:10049: result: no
> > > > configure:10058: checking for readelf
> > > > configure:10074: found /bin/readelf
> > > > configure:10085: result: readelf
> > > > configure:10199: checking for arm-linux-musleabihf-cc
> > > > configure:10229: result: no
> > > > configure:10199: checking for arm-linux-musleabihf-gcc
> > > > configure:10229: result: no
> > > > configure:10360: checking for arm-linux-musleabihf-c++
> > > > configure:10390: result: no
> > > > configure:10360: checking for arm-linux-musleabihf-g++
> > > > configure:10390: result: no
> > > > configure:10360: checking for arm-linux-musleabihf-cxx
> > > > configure:10390: result: no
> > > > configure:10360: checking for arm-linux-musleabihf-gxx
> > > > configure:10390: result: no
> > > > configure:10521: checking for arm-linux-musleabihf-gcc
> > > > configure:10551: result: no
> > > > configure:10677: checking for arm-linux-musleabihf-gfortran
> > > > configure:10707: result: no
> > > > configure:10838: checking for arm-linux-musleabihf-gccgo
> > > > configure:10868: result: no
> > > > configure:10999: checking for arm-linux-musleabihf-gdc
> > > > configure:11029: result: no
> > > > configure:11129: checking for ar
> > > > configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
> > > > configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
> > > > configure:11359: checking for as
> > > > configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
> > > > configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
> > > > configure:11589: checking for dlltool
> > > > configure:11622: result: no
> > > > configure:11700: checking for arm-linux-musleabihf-dlltool
> > > > configure:11730: result: no
> > > > configure:11819: checking for ld
> > > > configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
> > > > configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
> > > > configure:12049: checking for lipo
> > > > configure:12082: result: no
> > > > configure:12160: checking for arm-linux-musleabihf-lipo
> > > > configure:12190: result: no
> > > > configure:12279: checking for nm
> > > > configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
> > > > configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
> > > > configure:12509: checking for objcopy
> > > > configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
> > > > configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
> > > > configure:12739: checking for objdump
> > > > configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
> > > > configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
> > > > configure:12969: checking for otool
> > > > configure:13002: result: no
> > > > configure:13080: checking for arm-linux-musleabihf-otool
> > > > configure:13110: result: no
> > > > configure:13199: checking for ranlib
> > > > configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
> > > > configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
> > > > configure:13429: checking for readelf
> > > > configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
> > > > configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
> > > > configure:13659: checking for strip
> > > > configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
> > > > configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
> > > > configure:13889: checking for windres
> > > > configure:13922: result: no
> > > > configure:14000: checking for arm-linux-musleabihf-windres
> > > > configure:14030: result: no
> > > > configure:14119: checking for windmc
> > > > configure:14152: result: no
> > > > configure:14230: checking for arm-linux-musleabihf-windmc
> > > > configure:14260: result: no
> > > > configure:14327: checking where to find the target ar
> > > > configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14369: checking where to find the target as
> > > > configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14411: checking where to find the target cc
> > > > configure:14434: result: just compiled
> > > > configure:14453: checking where to find the target c++
> > > > configure:14493: result: pre-installed
> > > > configure:14498: checking where to find the target c++ for libstdc++
> > > > configure:14538: result: pre-installed
> > > > configure:14543: checking where to find the target dlltool
> > > > configure:14580: result: pre-installed
> > > > configure:14585: checking where to find the target gcc
> > > > configure:14608: result: just compiled
> > > > configure:14627: checking where to find the target gfortran
> > > > configure:14667: result: pre-installed
> > > > configure:14672: checking where to find the target gccgo
> > > > configure:14712: result: pre-installed
> > > > configure:14717: checking where to find the target gdc
> > > > configure:14757: result: pre-installed
> > > > configure:14762: checking where to find the target ld
> > > > configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14804: checking where to find the target lipo
> > > > configure:14830: result: pre-installed
> > > > configure:14835: checking where to find the target nm
> > > > configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14877: checking where to find the target objcopy
> > > > configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14919: checking where to find the target objdump
> > > > configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:14961: checking where to find the target otool
> > > > configure:14987: result: pre-installed
> > > > configure:14992: checking where to find the target ranlib
> > > > configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:15034: checking where to find the target readelf
> > > > configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:15076: checking where to find the target strip
> > > > configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
> > > > configure:15118: checking where to find the target windres
> > > > configure:15155: result: pre-installed
> > > > configure:15160: checking where to find the target windmc
> > > > configure:15197: result: pre-installed
> > > > configure:15230: checking whether to enable maintainer-specific portions of Makefiles
> > > > configure:15239: result: no
> > > > configure:15474: creating ./config.status
> > > >
> > > > ## ---------------------- ##
> > > > ## Running config.status. ##
> > > > ## ---------------------- ##
> > > >
> > > > This file was extended by config.status, which was
> > > > generated by GNU Autoconf 2.69. Invocation command line was
> > > >
> > > > CONFIG_FILES =
> > > > CONFIG_HEADERS =
> > > > CONFIG_LINKS =
> > > > CONFIG_COMMANDS =
> > > > $ ./config.status
> > > >
> > > > on hib
> > > >
> > > > config.status:1016: creating Makefile
> > > >
> > > > ## ---------------- ##
> > > > ## Cache variables. ##
> > > > ## ---------------- ##
> > > >
> > > > ac_cv_build=x86_64-cross-linux-gnu
> > > > ac_cv_c_compiler_gnu=yes
> > > > ac_cv_cxx_compiler_gnu=yes
> > > > ac_cv_env_AR_FOR_TARGET_set=
> > > > ac_cv_env_AR_FOR_TARGET_value=
> > > > ac_cv_env_AR_set=
> > > > ac_cv_env_AR_value=
> > > > ac_cv_env_AS_FOR_TARGET_set=
> > > > ac_cv_env_AS_FOR_TARGET_value=
> > > > ac_cv_env_AS_set=
> > > > ac_cv_env_AS_value=
> > > > ac_cv_env_CCC_set=
> > > > ac_cv_env_CCC_value=
> > > > ac_cv_env_CC_FOR_TARGET_set=
> > > > ac_cv_env_CC_FOR_TARGET_value=
> > > > ac_cv_env_CC_set=
> > > > ac_cv_env_CC_value=
> > > > ac_cv_env_CFLAGS_set=
> > > > ac_cv_env_CFLAGS_value=
> > > > ac_cv_env_CPPFLAGS_set=
> > > > ac_cv_env_CPPFLAGS_value=
> > > > ac_cv_env_CXXFLAGS_set=
> > > > ac_cv_env_CXXFLAGS_value=
> > > > ac_cv_env_CXX_FOR_TARGET_set=
> > > > ac_cv_env_CXX_FOR_TARGET_value=
> > > > ac_cv_env_CXX_set=
> > > > ac_cv_env_CXX_value=
> > > > ac_cv_env_DLLTOOL_FOR_TARGET_set=
> > > > ac_cv_env_DLLTOOL_FOR_TARGET_value=
> > > > ac_cv_env_DLLTOOL_set=
> > > > ac_cv_env_DLLTOOL_value=
> > > > ac_cv_env_GCC_FOR_TARGET_set=
> > > > ac_cv_env_GCC_FOR_TARGET_value=
> > > > ac_cv_env_GDC_FOR_TARGET_set=
> > > > ac_cv_env_GDC_FOR_TARGET_value=
> > > > ac_cv_env_GFORTRAN_FOR_TARGET_set=
> > > > ac_cv_env_GFORTRAN_FOR_TARGET_value=
> > > > ac_cv_env_GOC_FOR_TARGET_set=
> > > > ac_cv_env_GOC_FOR_TARGET_value=
> > > > ac_cv_env_LDFLAGS_set=
> > > > ac_cv_env_LDFLAGS_value=
> > > > ac_cv_env_LD_FOR_TARGET_set=
> > > > ac_cv_env_LD_FOR_TARGET_value=
> > > > ac_cv_env_LD_set=
> > > > ac_cv_env_LD_value=
> > > > ac_cv_env_LIBS_set=
> > > > ac_cv_env_LIBS_value=
> > > > ac_cv_env_LIPO_FOR_TARGET_set=
> > > > ac_cv_env_LIPO_FOR_TARGET_value=
> > > > ac_cv_env_LIPO_set=
> > > > ac_cv_env_LIPO_value=
> > > > ac_cv_env_NM_FOR_TARGET_set=
> > > > ac_cv_env_NM_FOR_TARGET_value=
> > > > ac_cv_env_NM_set=
> > > > ac_cv_env_NM_value=
> > > > ac_cv_env_OBJCOPY_FOR_TARGET_set=
> > > > ac_cv_env_OBJCOPY_FOR_TARGET_value=
> > > > ac_cv_env_OBJCOPY_set=
> > > > ac_cv_env_OBJCOPY_value=
> > > > ac_cv_env_OBJDUMP_FOR_TARGET_set=
> > > > ac_cv_env_OBJDUMP_FOR_TARGET_value=
> > > > ac_cv_env_OBJDUMP_set=
> > > > ac_cv_env_OBJDUMP_value=
> > > > ac_cv_env_OTOOL_FOR_TARGET_set=
> > > > ac_cv_env_OTOOL_FOR_TARGET_value=
> > > > ac_cv_env_OTOOL_set=
> > > > ac_cv_env_OTOOL_value=
> > > > ac_cv_env_RANLIB_FOR_TARGET_set=
> > > > ac_cv_env_RANLIB_FOR_TARGET_value=
> > > > ac_cv_env_RANLIB_set=
> > > > ac_cv_env_RANLIB_value=
> > > > ac_cv_env_READELF_FOR_TARGET_set=
> > > > ac_cv_env_READELF_FOR_TARGET_value=
> > > > ac_cv_env_READELF_set=
> > > > ac_cv_env_READELF_value=
> > > > ac_cv_env_STRIP_FOR_TARGET_set=
> > > > ac_cv_env_STRIP_FOR_TARGET_value=
> > > > ac_cv_env_STRIP_set=
> > > > ac_cv_env_STRIP_value=
> > > > ac_cv_env_WINDMC_FOR_TARGET_set=
> > > > ac_cv_env_WINDMC_FOR_TARGET_value=
> > > > ac_cv_env_WINDMC_set=
> > > > ac_cv_env_WINDMC_value=
> > > > ac_cv_env_WINDRES_FOR_TARGET_set=
> > > > ac_cv_env_WINDRES_FOR_TARGET_value=
> > > > ac_cv_env_WINDRES_set=
> > > > ac_cv_env_WINDRES_value=
> > > > ac_cv_env_build_alias_set=set
> > > > ac_cv_env_build_alias_value=x86_64-cross-linux-gnu
> > > > ac_cv_env_build_configargs_set=
> > > > ac_cv_env_build_configargs_value=
> > > > ac_cv_env_host_alias_set=set
> > > > ac_cv_env_host_alias_value=x86_64-cross-linux-gnu
> > > > ac_cv_env_host_configargs_set=
> > > > ac_cv_env_host_configargs_value=
> > > > ac_cv_env_target_alias_set=set
> > > > ac_cv_env_target_alias_value=arm-linux-musleabihf
> > > > ac_cv_env_target_configargs_set=
> > > > ac_cv_env_target_configargs_value=
> > > > ac_cv_host=x86_64-cross-linux-gnu
> > > > ac_cv_objext=o
> > > > ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
> > > > ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
> > > > ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
> > > > ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
> > > > ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
> > > > ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
> > > > ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
> > > > ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
> > > > ac_cv_path_SED=/bin/sed
> > > > ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
> > > > ac_cv_path_install='/bin/install -c'
> > > > ac_cv_prog_AR=ar
> > > > ac_cv_prog_AS=as
> > > > ac_cv_prog_AWK=gawk
> > > > ac_cv_prog_BISON=bison
> > > > ac_cv_prog_EXPECT=expect
> > > > ac_cv_prog_FLEX=flex
> > > > ac_cv_prog_LD=ld
> > > > ac_cv_prog_LEX=flex
> > > > ac_cv_prog_M4=m4
> > > > ac_cv_prog_MAKEINFO=makeinfo
> > > > ac_cv_prog_NM=nm
> > > > ac_cv_prog_OBJCOPY=objcopy
> > > > ac_cv_prog_OBJDUMP=objdump
> > > > ac_cv_prog_RANLIB=ranlib
> > > > ac_cv_prog_READELF=readelf
> > > > ac_cv_prog_STRIP=strip
> > > > ac_cv_prog_YACC='bison -y'
> > > > ac_cv_prog_ac_ct_CC=gcc
> > > > ac_cv_prog_ac_ct_CXX=g++
> > > > ac_cv_prog_cc_c89=
> > > > ac_cv_prog_cc_g=yes
> > > > ac_cv_prog_cxx_g=yes
> > > > ac_cv_target=arm-unknown-linux-musleabihf
> > > > acx_cv_cc_gcc_supports_ada=no
> > > > acx_cv_prog_LN=ln
> > > > gcc_cv_isl=no
> > > > gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
> > > > gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin:
> > > > gcc_cv_tool_prefix=/mnt/clfs/cross-tools
> > > > lt_cv_objdir=.libs
> > > >
> > > > ## ----------------- ##
> > > > ## Output variables. ##
> > > > ## ----------------- ##
> > > >
> > > > AR='ar'
> > > > AR_FOR_BUILD='$(AR)'
> > > > AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar'
> > > > AS='as'
> > > > AS_FOR_BUILD='$(AS)'
> > > > AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as'
> > > > AWK='gawk'
> > > > BISON='bison'
> > > > BUILD_CONFIG=''
> > > > CC='gcc'
> > > > CC_FOR_BUILD='$(CC)'
> > > > CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
> > > > CFLAGS='-g -O2'
> > > > CFLAGS_FOR_BUILD='-g -O2'
> > > > CFLAGS_FOR_TARGET='-g -O2'
> > > > COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
> > > > COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
> > > > COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'
> > > > CONFIGURE_GDB_TK=''
> > > > CPPFLAGS=''
> > > > CXX='g++'
> > > > CXXFLAGS='-g -O2'
> > > > CXXFLAGS_FOR_BUILD='-g -O2'
> > > > CXXFLAGS_FOR_TARGET='-g -O2'
> > > > CXX_FOR_BUILD='$(CXX)'
> > > > CXX_FOR_TARGET='arm-linux-musleabihf-c++'
> > > > DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
> > > > DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"'
> > > > DLLTOOL='dlltool'
> > > > DLLTOOL_FOR_BUILD='$(DLLTOOL)'
> > > > DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool'
> > > > ECHO_C=''
> > > > ECHO_N='-n'
> > > > ECHO_T=''
> > > > EXEEXT=''
> > > > EXPECT='expect'
> > > > FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
> > > > FLEX='flex'
> > > > GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
> > > > GCC_SHLIB_SUBDIR=''
> > > > GDB_TK=''
> > > > GDC_FOR_BUILD='$(GDC)'
> > > > GDC_FOR_TARGET='arm-linux-musleabihf-gdc'
> > > > GFORTRAN_FOR_BUILD='$(GFORTRAN)'
> > > > GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran'
> > > > GNATBIND='no'
> > > > GNATMAKE='no'
> > > > GOC_FOR_BUILD='$(GOC)'
> > > > GOC_FOR_TARGET='arm-linux-musleabihf-gccgo'
> > > > INSTALL_DATA='${INSTALL} -m 644'
> > > > INSTALL_GDB_TK=''
> > > > INSTALL_PROGRAM='${INSTALL}'
> > > > INSTALL_SCRIPT='${INSTALL}'
> > > > LD='ld'
> > > > LDFLAGS=''
> > > > LDFLAGS_FOR_BUILD=''
> > > > LDFLAGS_FOR_TARGET=''
> > > > LD_FOR_BUILD='$(LD)'
> > > > LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld'
> > > > LEX='flex'
> > > > LIBOBJS=''
> > > > LIBS=''
> > > > LIPO='lipo'
> > > > LIPO_FOR_TARGET='arm-linux-musleabihf-lipo'
> > > > LN='ln'
> > > > LN_S='ln -s'
> > > > LTLIBOBJS=''
> > > > M4='m4'
> > > > MAINT='#'
> > > > MAINTAINER_MODE_FALSE=''
> > > > MAINTAINER_MODE_TRUE='#'
> > > > MAKEINFO='makeinfo'
> > > > NM='nm'
> > > > NM_FOR_BUILD='$(NM)'
> > > > NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm'
> > > > OBJCOPY='objcopy'
> > > > OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy'
> > > > OBJDUMP='objdump'
> > > > OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump'
> > > > OBJEXT='o'
> > > > OTOOL='otool'
> > > > OTOOL_FOR_TARGET='arm-linux-musleabihf-otool'
> > > > PACKAGE_BUGREPORT=''
> > > > PACKAGE_NAME=''
> > > > PACKAGE_STRING=''
> > > > PACKAGE_TARNAME=''
> > > > PACKAGE_URL=''
> > > > PACKAGE_VERSION=''
> > > > PATH_SEPARATOR=':'
> > > > RANLIB='ranlib'
> > > > RANLIB_FOR_BUILD='$(RANLIB)'
> > > > RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib'
> > > > RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++'
> > > > READELF='readelf'
> > > > READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf'
> > > > RPATH_ENVVAR='LD_LIBRARY_PATH'
> > > > RUNTEST='runtest'
> > > > SED='/bin/sed'
> > > > SHELL='/bin/bash'
> > > > STRIP='strip'
> > > > STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip'
> > > > SYSROOT_CFLAGS_FOR_TARGET=''
> > > > TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile'
> > > > WINDMC='windmc'
> > > > WINDMC_FOR_BUILD='$(WINDMC)'
> > > > WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc'
> > > > WINDRES='windres'
> > > > WINDRES_FOR_BUILD='$(WINDRES)'
> > > > WINDRES_FOR_TARGET='arm-linux-musleabihf-windres'
> > > > YACC='bison -y'
> > > > ac_ct_CC='gcc'
> > > > ac_ct_CXX='g++'
> > > > bindir='${exec_prefix}/bin'
> > > > build='x86_64-cross-linux-gnu'
> > > > build_alias='x86_64-cross-linux-gnu'
> > > > build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
> > > > build_configdirs=' libiberty libcpp fixincludes'
> > > > build_cpu='x86_64'
> > > > build_libsubdir='build-x86_64-cross-linux-gnu'
> > > > build_noncanonical='x86_64-cross-linux-gnu'
> > > > build_os='linux-gnu'
> > > > build_subdir='build-x86_64-cross-linux-gnu'
> > > > build_tooldir='${exec_prefix}/arm-linux-musleabihf'
> > > > build_vendor='cross'
> > > > compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*'
> > > > configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin'
> > > > datadir='${datarootdir}'
> > > > datarootdir='${prefix}/share'
> > > > do_compare='cmp --ignore-initial=16 $$f1 $$f2'
> > > > docdir='${datarootdir}/doc/${PACKAGE}'
> > > > dvidir='${docdir}'
> > > > exec_prefix='${prefix}'
> > > > extra_host_libiberty_configure_flags='--enable-shared'
> > > > extra_host_zlib_configure_flags=''
> > > > extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
> > > > extra_liboffloadmic_configure_flags=''
> > > > extra_linker_plugin_configure_flags=''
> > > > extra_linker_plugin_flags=''
> > > > extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
> > > > extra_mpc_mpfr_configure_flags=''
> > > > extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
> > > > get_gcc_base_ver='cat'
> > > > gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src '
> > > > gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp'
> > > > host='x86_64-cross-linux-gnu'
> > > > host_alias='x86_64-cross-linux-gnu'
> > > > host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
> > > > host_cpu='x86_64'
> > > > host_noncanonical='x86_64-cross-linux-gnu'
> > > > host_os='linux-gnu'
> > > > host_shared='no'
> > > > host_subdir='.'
> > > > host_vendor='cross'
> > > > htmldir='${docdir}'
> > > > includedir='${prefix}/include'
> > > > infodir='${datarootdir}/info'
> > > > islinc=''
> > > > isllibs=''
> > > > libdir='${exec_prefix}/lib'
> > > > libexecdir='${exec_prefix}/libexec'
> > > > localedir='${datarootdir}/locale'
> > > > localstatedir='${prefix}/var'
> > > > mandir='${datarootdir}/man'
> > > > oldincludedir='/usr/include'
> > > > pdfdir='${docdir}'
> > > > poststage1_ldflags='-static-libstdc++ -static-libgcc'
> > > > poststage1_libs=''
> > > > prefix='/mnt/clfs/cross-tools'
> > > > program_transform_name='s&^&arm-linux-musleabihf-&'
> > > > psdir='${docdir}'
> > > > sbindir='${exec_prefix}/sbin'
> > > > sharedstatedir='${prefix}/com'
> > > > stage1_cflags='-g'
> > > > stage1_checking='--enable-checking=yes,types'
> > > > stage1_languages='c,lto'
> > > > stage1_ldflags='-static-libstdc++ -static-libgcc'
> > > > stage1_libs=''
> > > > stage2_werror_flag=''
> > > > sysconfdir='${prefix}/etc'
> > > > target='arm-unknown-linux-musleabihf'
> > > > target_alias='arm-linux-musleabihf'
> > > > target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
> > > > target_configdirs=' libgcc'
> > > > target_cpu='arm'
> > > > target_noncanonical='arm-linux-musleabihf'
> > > > target_os='linux-musleabihf'
> > > > target_subdir='arm-linux-musleabihf'
> > > > target_vendor='unknown'
> > > > tooldir='${exec_prefix}/arm-linux-musleabihf'
> > > >
> > > > ## ------------------- ##
> > > > ## File substitutions. ##
> > > > ## ------------------- ##
> > > >
> > > > alphaieee_frag='/dev/null'
> > > > host_makefile_frag='/dev/null'
> > > > ospace_frag='/dev/null'
> > > > serialization_dependencies='serdep.tmp'
> > > > target_makefile_frag='../gcc-9.2.0/config/mt-gnu'
> > > >
> > > > ## ----------- ##
> > > > ## confdefs.h. ##
> > > > ## ----------- ##
> > > >
> > > > /* confdefs.h */
> > > > #define PACKAGE_NAME ""
> > > > #define PACKAGE_TARNAME ""
> > > > #define PACKAGE_VERSION ""
> > > > #define PACKAGE_STRING ""
> > > > #define PACKAGE_BUGREPORT ""
> > > > #define PACKAGE_URL ""
> > > > #define LT_OBJDIR ".libs/"
> > > >
> > > > configure: exit 0
> > > >
> > > > What could be the problem?
> > > > ---------------------------------------------------------------
> > > > On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote:
> > > > > On 11/11/2019 13:33, sayed israr wrote:
> > > > > > ---------- Forwarded message ---------
> > > > > > From: Israr Sayed <sd.israr@xxxxxxxxx>
> > > > > > Date: Mon, Nov 11, 2019 at 5:38 PM
> > > > > > Subject: Re: Is it possible to build Single GCC Executable for armv5,
> > > > > > armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
> > > > > > To: Jonathan Wakely <jwakely.gcc@xxxxxxxxx>
> > > > > >
> > > > > >
> > > > > > I am building GCC from sources.Where i can configure it with 2 ways:
> > > > > > (1) --with-arch --with-cpu --with-fpu --with-float options .
> > > > > > (2) --with-multilib-list= .
> > > > > > In --with-multilib-list, we can configure for various combinations of
> > > > > > armv*-*-*.
> > > > > > For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m,
> > > > > > with float = hard, softfp, soft.
> > > > > > with fpu = fpv, fpv4, fpv4-d16 etc..
> > > > > > whereas if in configure i mention --with-arch --with-fpu --with-float.That
> > > > > > will build GCC for those options only.
> > > > > > I have a prebuilt arm GCC binary for STM32F controllers, which is built for
> > > > > > whole range of armv7-M, armv7e-m along with FPUs.
> > > > > > there configure options show --with-multilib-list=rmprofile.
> > > > > > rmprofile is the multilib option for configure.Which is exactly what
> > > > > > gcc/config/arm/t-rmprofile file is about.
> > > > > > I hope i can explain my question better.
> > > > >
> > > > > You can configure the compiler with --with-multlib-list=xxx
> > > > >
> > > > > where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile"
> > > > >
> > > > > If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or
> > > > > --with-arch.
> > > > >
> > > > > Be warned, the full set of multilibs is LARGE. It requires a fast machine
> > > > > and/or a lot of time to build them all.
> > > > >
> > > > > You can, of course, edit any of the files - the GPL gives you that right,
> > > > > but if you do so, you're most likely on your own. The multilib
> > > > > configurations are complex and rely heavily on GNU Makefile trickery to
> > > > > express all the required combinations.
> > > > >
> > > > > R.
> > > > >
> > > > > > ------------------------------------------------------
> > > > > >
> > > > > > On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote:
> > > > > > > On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@xxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*,
> > > > > > There are multiple arm target options.
> > > > > > > >
> > > > > > > > Reading [GCC internal Manual], These are called Target Makefile
> > > > > > Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS,
> > > > > > MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE,
> > > > > > MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME.
> > > > > > > >
> > > > > > > > What I am not able to understand that how to bring it in at the time of
> > > > > > configure.Which option to choose?
> > > > > > > >
> > > > > > > > More over is it possible to edit those t-* files as per the requirement
> > > > > > and how?
> > > > > > > > Please Help.
> > > > > > >
> > > > > > > I don't understand your question. Your email's subject talks about a
> > > > > > > single GCC executable for multiple ARM variants, which is supported
> > > > > > > automatically. When you configure GCC for an ARM target you can select
> > > > > > > the specific processor type using the -march and/or -mcpu options. See
> > > > > > > the documentation of command-line options in the GCC manual.
> > > > > > >
> > > > > > > You don't need to do anything special to use the target makefile
> > > > > > > fragments, they're used automatically, as needed.
> > > > >
> > >
>
