Re: building gcc for mipsel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



22.8.2016, 23:10, Peter Münster kirjoitti:

Thanks. I've built an OpenWRT-SDK but I still get "opcode not supported"...

I aimed to try this crosstoolchain myself so I downloaded the assumed OpenWRT-SDK for bcm53xx which should be inside the Asus WL-500gP. But when I unpacked the SDK tarball I found instead the following :

[root@localhost OpenWrt-SDK-15.05.1-bcm53xx_gcc-4.8-linaro_uClibc-0.9.33.2_eabi.Linux-x86_64]# ls build_dir
target-arm_cortex-a9_uClibc-0.9.33.2_eabi
[root@localhost OpenWrt-SDK-15.05.1-bcm53xx_gcc-4.8-linaro_uClibc-0.9.33.2_eabi.Linux-x86_64]# ls staging_dir
host
target-arm_cortex-a9_uClibc-0.9.33.2_eabi
toolchain-arm_cortex-a9_gcc-4.8-linaro_uClibc-0.9.33.2_eabi
[root@localhost OpenWrt-SDK-15.05.1-bcm53xx_gcc-4.8-linaro_uClibc-0.9.33.2_eabi.Linux-x86_64]#

Some uClibc based crosstoolchain for ARM, not for MIPS, WTF ???

The Asus WL-500gP hardware was told to be "Broadcom BCM5354@240Mhz". Is this ARM-based, not
MIPS?




[Index of Archives]     [Linux C Programming]     [Linux Kernel]     [eCos]     [Fedora Development]     [Fedora Announce]     [Autoconf]     [The DWARVES Debugging Tools]     [Yosemite Campsites]     [Yosemite News]     [Linux GCC]

  Powered by Linux