Hi all. I'm obviously doing something wrong (stupid?). I'm trying to build a gnu 4.2.0 tool chain on Solaris 2.7 host for a powerpc-eabi target. The sources are: binutils-2.17 gcc-core-4.2.0 gcc-g++-4.2.1 newlib-1.16.0 The source, build and install directories are all separate from each other. The binutils build and install appears to be ok. The GCC build and install appears to be ok. But when I do a compile, it appears that the wrong assembler is used. Here is a snippet of the "-v" output (I've "trimmed" out stuff due to size): Using built-in specs. Target: powerpc-eabi Configured with: /home/morr_jo/work/ToolChain/sunCross/src/gcc-4.2.0/configure -v --target=powerpc-eabi --prefix=/home/morr_jo/work/ToolChain/sunCross/cross-4.2.0 --disable-bootstrap --with-target-tools=/home/morr_jo/work/ToolChain/sunCross/cross-4.2.0/bi n --enable-languages=c,c++ --with-gnu-as --with-gnu-ld --with-newlib --with-gxx-include-dir=/home/morr_jo/work/ToolChain/sunCross/cross-4.2.0 /powerpc-eabi/include Thread model: single gcc version 4.2.0 /home/morr_jo/work/ToolChain/sunCross/cross-4.2.0/libexec/gcc/powerpc-ea bi/4.2.0/cc1 -quiet -nostdinc -v ...snipped..... -I /rel/software/psa/ecos_2/repos/ecos2_install/include/cyg/io -I /rel/software/psa/ecos_2/repos/ecos2_install/include/sys -iprefix /opt/gnu/gcc.ppc/lib/gcc-lib/powerpc-eabi/4.2.0/ ....snipped.... -D ECOS_2 -D SEGMENTED_FLASH -D EMBEDDED_NIC -D MIB_FEATURE -D MANUAL_GTPA_ADJUST /rel/software/psa/ptxdrvr/c/snoopdrv.c -quiet -dumpbase snoopdrv.c -mcpu=603 -mstrict-align -auxbase-strip snoopdrv.o -g -O0 -Wall -Wno-format -version -fno-builtin -fno-for-scope -o /tmp/ccjEp2aQ.s cc1: note: obsolete option -I- used, please use -iquote instead cc1: warning: command line option "-fno-for-scope" is valid for C++/ObjC++ but not for C ignoring nonexistent directory "../src" ignoring nonexistent directory "/rel/software/psa/sl/h" ignoring nonexistent directory "/rel/software/psa/ppl/h" #include "..." search starts here: #include <...> search starts here: /home/morr_jo/work/ToolChain/testbuilds/src .. ...... snipped out the search list due to size ....... GNU C version 4.2.0 (powerpc-eabi) compiled by GNU C version 2.95.2 19991024 (release). GGC heuristics: --param ggc-min-expand=65 --param ggc-min-heapsize=65536 Compiler executable checksum: d11f24170b8b94a58948dac4d826ba1f /opt/gnu/gcc.ppc/lib/gcc-lib/powerpc-eabi/../../../powerpc-eabi/bin/as -mppc -many -V -Qy -o snoopdrv.o /tmp/ccjEp2aQ.s GNU assembler version 2.10.1 (powerpc-eabi) using BFD version 2.10.1 /tmp/ccjEp2aQ.s: Assembler messages: /tmp/ccjEp2aQ.s:35: Warning: Missing string /tmp/ccjEp2aQ.s:35: Error: Rest of line ignored. First ignored character is `1'. /tmp/ccjEp2aQ.s:36: Error: Unknown pseudo-op: `.loc' /tmp/ccjEp2aQ.s:43: Error: Unknown pseudo-op: `.loc' ..... I've already done a successful install of the same tool chain on a Linux i686 system. The Sun uname info: SunOS merlin 5.7 Generic_106541-11 sun4u sparc SUNW,Ultra-60 The PATH variable value during the GCC build and install was: /home/morr_jo/work/ToolChain/sunCross/cross-4.2.0/bin:./:/usr/sbin:/usr/ bin:/bin:/opt/local/bin:/opt/gnu/bin:/usr/ccs/bin No where in that path is the path to the assembler identified in the listing above. I obiously do not understand something about Sun (no jokes please) or unix in general. Any help would be appreciated. If you need more info, please let me know. Thanks John Morrison Printronix, Inc
