I have resolved the problem of sed, now compilation fails at this stage:
/tmp/gcc-4.2.2/host-powerpc-ibm-aix5.3.0.0/prev-gcc/xgcc
-B/tmp/gcc-4.2.2/host-powerpc-ibm-aix5.3.0.0/prev-gcc/
-B/usr/local/powerpc-ibm-aix5.3.0.0/bin/ -g -O2 -DIN_GCC -W -Wall
-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic
-Wno-long-long -Wno-variadic-macros -Wno-overlength-strings
-Wold-style-definition -Wmissing-format-attribute -DHAVE_CONFIG_H
-Wl,-bbigtoc -o cc1-dummy c-lang.o stub-objc.o attribs.o c-errors.o
c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o c-aux-info.o
c-common.o c-opts.o c-format.o c-semantics.o c-incpath.o cppdefault.o
c-ppoutput.o c-cppbuiltin.o prefix.o c-objc-common.o c-dump.o c-pch.o
c-parser.o rs6000-c.o c-gimplify.o tree-mudflap.o c-pretty-print.o
c-omp.o dummy-checksum.o \
main.o libbackend.a ../libcpp/libcpp.a
../libdecnumber/libdecnumber.a ../libcpp/libcpp.a -lintl -liconv
../libiberty/libiberty.a ../libdecnumber/libdecnumber.a
collect2: ld returned 12 exit status
make[3]: *** [cc1-dummy] Error 1
make[3]: Leaving directory `/tmp/gcc-4.2.2/host-powerpc-ibm-aix5.3.0.0/gcc'
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory `/tmp/gcc-4.2.2'
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory `/tmp/gcc-4.2.2'
make: *** [all] Error 2
Please guide how to proceed.
Regards,
ANANT.
----- Message from asa@xxxxxxxxxxx ---------
Date: Thu, 17 Jan 2008 15:20:55 +0530
From: Anant S Athavale <asa@xxxxxxxxxxx>
Reply-To: asa@xxxxxxxxxxx, anant_athavale@xxxxxxxxx
Subject: Re: Problem compiling gcc 4.2.1 on AIX 5.3
To: Kai Ruottu <karuottu@xxxxxxxx>
Cc: gcc-help@xxxxxxxxxxx
----- Message from karuottu@xxxxxxxx ---------
Date: Thu, 17 Jan 2008 11:20:04 +0200
From: Kai Ruottu <karuottu@xxxxxxxx>
Reply-To: Kai Ruottu <karuottu@xxxxxxxx>
Subject: Re: Problem compiling gcc 4.2.1 on AIX 5.3
To: Anant Athavale <asa@xxxxxxxxxxx>
Cc: gcc-help@xxxxxxxxxxx
Anant Athavale wrote:
gcc compilation fails with the following error AIX 5.3
"prefix=/usr/local" "tooldir=/usr/local/powerpc-ibm-aix" "AR=ar"
"AS=as" "CC=gcc" "CXX=c++" "LD=ld" make[3]: Entering directory
`/tmp/gcc-4.2.1/host-powerpc-ibm-aix/gcc'
make[3]: *** No rule to make target `all'. Stop.
The "tooldir" part tells the guessed, given or somehow else got $target
name being 'powerpc-ibm-aix'...
But the 'gcc/config.gcc' doesn't know this $target :( Possible ones
can be '*-*-aix4*' and '*-*-aix5*'
where the first star can be 'rs6000', 'powerpc' or 'ppc'. So that bare
'aix' isn't understood....
Please see what the command :
./config.guess
gives in the main GCC source directory. There shouldn't be that bare
'aix' in the answer to the guess!
./config.guess output is as below:
/usr/bin/oslevel[845]: sed: not found
/usr/bin/oslevel: Broken pipe
powerpc-ibm-aix
But when I execute which sed, the output is
/opt/freeware/bin/sed
and this is gnu sed.
Now that I have some hint, I will check, what could be the reason and
let you know again later.
Thanks.
Regards,
ANANT.
If there is (The system is really stupid in its guesses...), then you
must be wiser and tell the right names,
for instance :
..../configure --build=powerpc-ibm-aix5.3 --host=powerpc-ibm-aix5.3
--target=powerpc-ibm-aix5.3 ....
----- End message from karuottu@xxxxxxxx -----
Regards,
Anant Athavale,
Computer and Information Group,
ISRO Satellite Centre,
Airport Road,
Bangalore - 560017
INDIA.
Landline: 080-25083512
Cell: 99809 13616
My Free/BusyURL:
http://isacmail2.isac.dos.gov.in/kronolith/fb.php?u=asa%40isac.gov.in
----- End message from asa@xxxxxxxxxxx -----
Regards,
Anant Athavale.
