On 4/13/06, Hermann-Simon Lichte <hermann@xxxxxxxxxxxxxxxxxxxxxxxx> wrote: > Hello again, > > Please note that gcc 4.0.3 does not reveal this problem. I was able > to build a 4.0.3 cross-compiler without trouble. > > Cheers, > Hermann > > On 13.04.2006, at 08:45, Hermann-Simon Lichte wrote: > > > Hello, > > > > I wanted to compile gcc 4.1.0 for a powerpc-eabi target using > > newlib, but libstdc++-v3's configure fails with the following error > > message: > > > > checking for shared libgcc… configure: error: Link tests are not > > allowed after GCC_NO_EXECUTABLES > > > > This error is produced at line # 87576 in configure. > > > > This happens both on a Darwin 8.6.0 and a Windows XP Cygwin > > machine. I have no trouble building 3.x gcc's so in the meantime > > I'll stick with on of these. > > > > Please find attached the bzipped config.log. > > > > Any pointers are appreciated. Do the same thing (you maybe missing out a / or another character). like go to gcc4-0.3 -v copy it to a file do the same thing for gcc4.1. I think it should work fine. I just built powerpc-eabi as target. First binutils and then gcc with newlib. I didn't copy libgloss. But still it worked.Try what i have done below. pro@deb:~/powerpc-eabi-env/bin$ ./powerpc-eabi-g++ -v Using built-in specs. Target: powerpc-eabi Configured with: /home/pro/gcc-4.1.0/configure --target=powerpc-eabi --prefix=/home/pro/powerpc-eabi-env/ --with-newlib --enable-languages=c,c++ --disable-libssp Thread model: single gcc version 4.1.0 pro@deb:~/powerpc-eabi-env/bin$ ./powerpc-eabi-gcc -v Using built-in specs. Target: powerpc-eabi Configured with: /home/pro/gcc-4.1.0/configure --target=powerpc-eabi --prefix=/home/pro/powerpc-eabi-env/ --with-newlib --enable-languages=c,c++ --disable-libssp Thread model: single gcc version 4.1.0 pro@deb:~/powerpc-eabi-env/bin$ I only got this because i think i didn't do something properly. The C compiler is installed correctly. only make install of c++ went wrong. I would suggest installing them seperately would work fine. /bin/sh: line 3: cd: powerpc-eabi/libstdc++-v3: No such file or directory make[1]: *** [install-target-libstdc++-v3] Error 1 > > > > Cheers, > > Hermann > > > > <config.log.bz2> > > > >
