Here is the information I can provide.
The command like with which I am compiling the program (I am using a
makefile) looks something like below.
g++ -g -pthreads -fprofile-arcs -ftest-coverage -I- -I.
-I/usr/openwin/include -I/opt/sybase/12.5/OCS-12_5/include
-I/home/custom2/chronos/r30.0/gcovchr/build/include
-I/home/execarch/include/30.0/current -I/opt/ScanBroker/include
-I/opt/asn/5.0.3/include -I/opt/syncsort/include -I/opt/mqm/inc
-I/opt/perf_3.75/include
-I/home/execarch/tools/xerces/gnu/xerces-2.2/include
-I/opt/bea/tuxedo8.1/include
-I/home/custom2/chronos/r30.0/gcovchr/build/include
-I/home/execarch/chronos/ea5.1/gnu/build/include -D_GLIBCPP_USE_LONG_LONG
-fPIC -c chorCmRev.c -o chorCmRev.o
g++ -v -shared -pthreads -o
/home/custom2/chronos/r30.0/gcovchr/build/lib/libchorTransactionViewMaps.so
chorCustInfoX_chorEventR.o chorCustInfoX_checSelEcR.o
chorOriglFieldsX_chorEventR.o chorOriglDupChkFieldsX_chorEventR.o
chorEventR_chorCustInfoX.o chorEventR_chorOriglFieldsX.o
chorEventR_chorOriglDupChkFieldsX.o chorEventR_chorSelAutomationR.o
chorEventR_chorUpdDeleteStatusR.o chorEventR_chorSelCustAddrInfoR.o
chorEventR_chorUpdForNTCCR.o chorEventR_chorUpdBndItmPrcCdS.o
chorEventR_chorInsOnlnChrgItmS.o chorEventR_chorSelOriginalProductR.o
chorEventR_chorSelOriginalNonTransR.o chorEventR_chorSelPreviousR.o
chorEventR_chorEventR.o chorEventR_chorSelNTPreviousR.o
chorDeactivateS_chorEventR.o chorSelAutomationS_chorEventR.o
chorUpdBndItmPrcCdS_chorEventR.o chorUpdDeleteStatusS_chorEventR.o
chorUpdForCCAAS_chorEventR.o chorUpdForNTCCS_chorEventR.o
chorUpdErrRevS_chorEventR.o chorUpdOriglShpmtS_chorEventR.o
chorEventR_chorSelDupCheckR.o chorSelDupCheckS_chorEventR.o
chorABChldShpDtlX_chorSelTransportationR.o chorEventR_chorABChldShpDtlX.o
chorAirBillCmRev.o chorNRBMerge.o chorBrUpd.o chorCODRemittance.o chorCcaa.o
chorCcad.o chorCmRev.o chorDlRev.o chorEcDel.o chorDeactivate.o chorEcRls.o
chorEcScn.o chorEvent.o chorItemPrcsCode.o chorNRBRS.o chorNRBRU.o
chorNtCca.o chorNtCcd.o chorNtRev.o chorNtEcDel.o chorNtEcRls.o chorRBDlt.o
chorRBRls.o chorReplay.o chorScan.o chorTranDupCheck.o chorRebillRequest.o
chorRebillRevenue.o chorRBDlq.o chorCmRevFactory.o chorChildAirbillScan.o
chorScanFactory.o /home/execarch/chronos/ea5.1/gnu/build/lib/eaVerInfo.o
Reading specs from
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/specs
Configured with: configure -prefix /home/execarch/tools/gcc-3.3.2/
Thread model: posix
gcc version 3.3.2
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/collect2
-V -G -dy -z textoff -Y P,/usr/ccs/lib:/usr/lib -Qy -o
/home/custom2/chronos/r30.0/gcovchr/build/lib/libchorTransactionViewMaps.so
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crti.o
/usr/ccs/lib/values-Xa.o
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtbegin.o
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib
-L/home/execarch/tools/gcc-3.3.2//lib/gcc-lib/sparc-sun-solaris2.8/3.3.2
-L/usr/ccs/bin -L/usr/ccs/lib
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/../../..
-L/home/execarch/tools/gcc-3.3.2//lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/../../..
chorCustInfoX_chorEventR.o chorCustInfoX_checSelEcR.o
chorOriglFieldsX_chorEventR.o chorOriglDupChkFieldsX_chorEventR.o
chorEventR_chorCustInfoX.o chorEventR_chorOriglFieldsX.o
chorEventR_chorOriglDupChkFieldsX.o chorEventR_chorSelAutomationR.o
chorEventR_chorUpdDeleteStatusR.o chorEventR_chorSelCustAddrInfoR.o
chorEventR_chorUpdForNTCCR.o chorEventR_chorUpdBndItmPrcCdS.o
chorEventR_chorInsOnlnChrgItmS.o chorEventR_chorSelOriginalProductR.o
chorEventR_chorSelOriginalNonTransR.o chorEventR_chorSelPreviousR.o
chorEventR_chorEventR.o chorEventR_chorSelNTPreviousR.o
chorDeactivateS_chorEventR.o chorSelAutomationS_chorEventR.o
chorUpdBndItmPrcCdS_chorEventR.o chorUpdDeleteStatusS_chorEventR.o
chorUpdForCCAAS_chorEventR.o chorUpdForNTCCS_chorEventR.o
chorUpdErrRevS_chorEventR.o chorUpdOriglShpmtS_chorEventR.o
chorEventR_chorSelDupCheckR.o chorSelDupCheckS_chorEventR.o
chorABChldShpDtlX_chorSelTransportationR.o chorEventR_chorABChldShpDtlX.o
chorAirBillCmRev.o chorNRBMerge.o chorBrUpd.o chorCODRemittance.o chorCcaa.o
chorCcad.o chorCmRev.o chorDlRev.o chorEcDel.o chorDeactivate.o chorEcRls.o
chorEcScn.o chorEvent.o chorItemPrcsCode.o chorNRBRS.o chorNRBRU.o
chorNtCca.o chorNtCcd.o chorNtRev.o chorNtEcDel.o chorNtEcRls.o chorRBDlt.o
chorRBRls.o chorReplay.o chorScan.o chorTranDupCheck.o chorRebillRequest.o
chorRebillRevenue.o chorRBDlq.o chorCmRevFactory.o chorChildAirbillScan.o
chorScanFactory.o /home/execarch/chronos/ea5.1/gnu/build/lib/eaVerInfo.o
-lstdc++ -lm -lgcc_s -lgcc_s
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtend.o
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtn.o
ld: Software Generation Utilities - Solaris Link Editors: 5.8-1.297
g++ -v -shared -pthreads -o
/home/custom2/chronos/r30.0/gcovchr/build/lib/libchorEvent.so
chorCustInfoX_chorEventR.o chorCustInfoX_checSelEcR.o
chorOriglFieldsX_chorEventR.o chorOriglDupChkFieldsX_chorEventR.o
chorEventR_chorCustInfoX.o chorEventR_chorOriglFieldsX.o
chorEventR_chorOriglDupChkFieldsX.o chorEventR_chorSelAutomationR.o
chorEventR_chorUpdDeleteStatusR.o chorEventR_chorSelCustAddrInfoR.o
chorEventR_chorUpdForNTCCR.o chorEventR_chorUpdBndItmPrcCdS.o
chorEventR_chorInsOnlnChrgItmS.o chorEventR_chorSelOriginalProductR.o
chorEventR_chorSelOriginalNonTransR.o chorEventR_chorSelPreviousR.o
chorEventR_chorEventR.o chorEventR_chorSelNTPreviousR.o
chorDeactivateS_chorEventR.o chorSelAutomationS_chorEventR.o
chorUpdBndItmPrcCdS_chorEventR.o chorUpdDeleteStatusS_chorEventR.o
chorUpdForCCAAS_chorEventR.o chorUpdForNTCCS_chorEventR.o
chorUpdErrRevS_chorEventR.o chorUpdOriglShpmtS_chorEventR.o
chorEventR_chorSelDupCheckR.o chorSelDupCheckS_chorEventR.o
chorABChldShpDtlX_chorSelTransportationR.o chorEventR_chorABChldShpDtlX.o
chorAirBillCmRev.o chorNRBMerge.o chorBrUpd.o chorCODRemittance.o chorCcaa.o
chorCcad.o chorCmRev.o chorDlRev.o chorEcDel.o chorDeactivate.o chorEcRls.o
chorEcScn.o chorEvent.o chorItemPrcsCode.o chorNRBRS.o chorNRBRU.o
chorNtCca.o chorNtCcd.o chorNtRev.o chorNtEcDel.o chorNtEcRls.o chorRBDlt.o
chorRBRls.o chorReplay.o chorScan.o chorTranDupCheck.o chorRebillRequest.o
chorRebillRevenue.o chorRBDlq.o chorCmRevFactory.o chorChildAirbillScan.o
chorScanFactory.o /home/execarch/chronos/ea5.1/gnu/build/lib/eaVerInfo.o
Reading specs from
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/specs
Configured with: configure -prefix /home/execarch/tools/gcc-3.3.2/
Thread model: posix
gcc version 3.3.2
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/collect2
-V -G -dy -z textoff -Y P,/usr/ccs/lib:/usr/lib -Qy -o
/home/custom2/chronos/r30.0/gcovchr/build/lib/libchorEvent.so
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crti.o
/usr/ccs/lib/values-Xa.o
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtbegin.o
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib
-L/home/execarch/tools/gcc-3.3.2//lib/gcc-lib/sparc-sun-solaris2.8/3.3.2
-L/usr/ccs/bin -L/usr/ccs/lib
-L/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/../../..
-L/home/execarch/tools/gcc-3.3.2//lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/../../..
chorCustInfoX_chorEventR.o chorCustInfoX_checSelEcR.o
chorOriglFieldsX_chorEventR.o chorOriglDupChkFieldsX_chorEventR.o
chorEventR_chorCustInfoX.o chorEventR_chorOriglFieldsX.o
chorEventR_chorOriglDupChkFieldsX.o chorEventR_chorSelAutomationR.o
chorEventR_chorUpdDeleteStatusR.o chorEventR_chorSelCustAddrInfoR.o
chorEventR_chorUpdForNTCCR.o chorEventR_chorUpdBndItmPrcCdS.o
chorEventR_chorInsOnlnChrgItmS.o chorEventR_chorSelOriginalProductR.o
chorEventR_chorSelOriginalNonTransR.o chorEventR_chorSelPreviousR.o
chorEventR_chorEventR.o chorEventR_chorSelNTPreviousR.o
chorDeactivateS_chorEventR.o chorSelAutomationS_chorEventR.o
chorUpdBndItmPrcCdS_chorEventR.o chorUpdDeleteStatusS_chorEventR.o
chorUpdForCCAAS_chorEventR.o chorUpdForNTCCS_chorEventR.o
chorUpdErrRevS_chorEventR.o chorUpdOriglShpmtS_chorEventR.o
chorEventR_chorSelDupCheckR.o chorSelDupCheckS_chorEventR.o
chorABChldShpDtlX_chorSelTransportationR.o chorEventR_chorABChldShpDtlX.o
chorAirBillCmRev.o chorNRBMerge.o chorBrUpd.o chorCODRemittance.o chorCcaa.o
chorCcad.o chorCmRev.o chorDlRev.o chorEcDel.o chorDeactivate.o chorEcRls.o
chorEcScn.o chorEvent.o chorItemPrcsCode.o chorNRBRS.o chorNRBRU.o
chorNtCca.o chorNtCcd.o chorNtRev.o chorNtEcDel.o chorNtEcRls.o chorRBDlt.o
chorRBRls.o chorReplay.o chorScan.o chorTranDupCheck.o chorRebillRequest.o
chorRebillRevenue.o chorRBDlq.o chorCmRevFactory.o chorChildAirbillScan.o
chorScanFactory.o /home/execarch/chronos/ea5.1/gnu/build/lib/eaVerInfo.o
-lstdc++ -lm -lgcc_s -lgcc_s
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtend.o
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/crtn.o
ld: Software Generation Utilities - Solaris Link Editors: 5.8-1.297
All these and a lot more shared libraries then get linked into a library
package which then is used to build a tuxedo server.
When I boot up the tux server, run some uds and then shut down the tux
server, I get .da files for a lot of source code files.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc> ls
*.da
chorDBFuncs.da chorInsPkgEventHistS_chorEventS.da
chorDBIntfcContainer.da chorInsPkgSpclHndlgS_chorEventR.da
chorEventR_chorInsPkgEventHistR.da chorInsRemittanceS_chorEventR.da
chorEventR_chorSelCustAddrInfoR.da
chorInsTransportationS_chorEventR.da
chorEventR_chorSelNonBillChrgR.da chorNonBillCharge.da
chorEventR_chorSelNonTransAllR.da chorNonTransportation.da
chorEventR_chorSelNonTransStatR.da chorNonTransportationStat.da
chorEventR_chorSelOnlnChrgItmR.da chorOnlineChargeItem.da
chorEventR_chorSelOnlnPkgStatR.da chorOnlinePackageStat.da
chorEventR_chorSelOnlnRevItmPrflR.da chorOnlineReferenceNote.da
chorEventR_chorSelOrigShpSpcHdlR.da chorOnlineRevenueItemPrfl.da
chorEventR_chorSelOriginalProductR.da chorOnlnCustAddrInfo.da
chorEventR_chorSelPkgSpclHndlgR.da chorOrigShpSpclHndlg.da
chorEventR_chorSelRevItemRefNoteR.da chorOriginalProduct.da
chorEventR_chorSelRevPriceOptR.da chorPkgSpclHndlg.da
chorEventR_chorSelTransportationR.da chorRevenuePricingOption.da
chorInsNonBillChrgS_chorEventR.da chorStatCode.da
chorInsNonTransAllS_chorEventR.da chorTransportation.da
chorInsNonTransEventHistS_chorEventR.da chorUpdBndItmPrcCdS_chorEventR.da
chorInsOnlnRevItmPrflS_chorEventR.da chorUpdNonBillChrgS_chorEventR.da
chorInsOrigShpSpcHdlS_chorEventR.da chorUpdNonTransAllS_chorEventR.da
chorInsOriginalProductS_chorEventR.da chorUpdPkgSpclHndlgS_chorEventR.da
chorInsPkgEventHistS_chorEventR.da
chorUpdTransportationS_chorEventR.da
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc>
But this does not happen for all the source code e.g. the directory for
which I showed you the command line g++ above, there are no .da file
generated. Very much similar Imakefiles are being used to compile the entire
project.
In any case, when I run gcov like below, the output is shown.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc> gcov
chorStatCode.c
0.00% of 3 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_vector.h
Creating stl_vector.h.gcov.
0.00% of 10 lines executed in file
/home/execarch/chronos/ea5.1/gnu/build/include/eaSingleton.h
Creating eaSingleton.h.gcov.
0.00% of 1 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/new
Creating new.gcov.
0.00% of 4 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_construct.h
Creating stl_construct.h.gcov.
0.00% of 1 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/basic_string.h
Creating basic_string.h.gcov.
0.00% of 3 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_function.h
Creating stl_function.h.gcov.
0.00% of 2 lines executed in file
/home/execarch/chronos/ea5.1/gnu/build/include/eaGlobals.h
Creating eaGlobals.h.gcov.
0.00% of 14 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/list.tcc
Creating list.tcc.gcov.
0.00% of 15 lines executed in file
/home/custom2/chronos/r30.0/gcovchr/build/include/chorUpdNonTransStatv.h
Creating chorUpdNonTransStatv.h.gcov.
0.00% of 15 lines executed in file
/home/custom2/chronos/r30.0/gcovchr/build/include/chorInsNonTransStatv.h
Creating chorInsNonTransStatv.h.gcov.
0.00% of 15 lines executed in file
/home/custom2/chronos/r30.0/gcovchr/build/include/chorSelNonTransStatv.h
Creating chorSelNonTransStatv.h.gcov.
|
|
|
100.00% of 1 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/iostream
Creating iostream.gcov.
0.00% of 150 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_tree.h
Creating stl_tree.h.gcov.
0.00% of 7 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_alloc.h
Creating stl_alloc.h.gcov.
0.00% of 40 lines executed in file
/home/custom2/chronos/r30.0/gcovchr/build/include/chorDBUtils.h
Creating chorDBUtils.h.gcov.
0.00% of 2 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_pair.h
Creating stl_pair.h.gcov.
20.00% of 5 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_set.h
Creating stl_set.h.gcov.
0.00% of 42 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/bits/stl_list.h
Creating stl_list.h.gcov.
0.00% of 121 lines executed in file
/home/custom2/chronos/r30.0/gcovchr/build/include/chorDBIntfc.h
Creating chorDBIntfc.h.gcov.
0.00% of 154 lines executed in file chorStatCode.c
Creating chorStatCode.c.gcov.
0.00% of 12 lines executed in file
/home/execarch/tools/gcc-3.3.2/include/c++/3.3.2/sparc-sun-solaris2.8/bits/atomicity.h
Creating atomicity.h.gcov.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc>
My problem is that
1. It did not generate the .da files for each source code file compiled with
fprofile-arcs and ftest-coverage option.
2. It says 0% of the code was executed for most of my source code files.
However, the tux server does output some results looking at which I know
that a particular line got executed even though gcov says it has not.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc> gcov
Usage: gcov [OPTION]... SOURCEFILE
Print code coverage information.
-h, --help Print this help, then exit
-v, --version Print version number, then exit
-b, --branch-probabilities Include branch probabilities in output
-c, --branch-counts Given counts of branches taken
rather than percentages
-n, --no-output Do not create an output file
-l, --long-file-names Use long output file names for included
source files
-f, --function-summaries Output summaries for each function
-o, --object-directory DIR|FILE Search for object files in DIR or called
FILE
-p, --preserve-paths Preserve all pathname components
For bug reporting instructions, please see:
<URL:http://gcc.gnu.org/bugs.html>.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc> gcov
-v
gcov (GCC) 3.3.2
Copyright (C) 2001 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc>
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc> g++ -v
Reading specs from
/home/execarch/tools/gcc-3.3.2/bin/../lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/specs
Configured with: configure -prefix /home/execarch/tools/gcc-3.3.2/
Thread model: posix
gcc version 3.3.2
/home/custom2/chronos/r30.0/gcovchr/src/ore/lib/dbInterfaces/DBIntfc>
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Nathan Sidwell <nathan@xxxxxxxxxxxxxxxx></i><br>To:
<i>Sunil Kher <sunilkher@xxxxxxxxxxx></i><br>CC:
<i>gcc-help@xxxxxxxxxxx</i><br>Subject: <i>Re: Help needed with
gcov</i><br>Date: <i>Thu, 20 Oct 2005 17:28:33 +0100</i><br>MIME-Version:
<i>1.0</i><br>Received: <i>from mail.codesourcery.com ([65.74.133.11]) by
MC6-F23.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Thu, 20 Oct 2005
09:28:45 -0700</i><br>Received: <i>(qmail 12549 invoked from network); 20
Oct 2005 16:28:39 -0000</i><br>Received: <i>from unknown (HELO
?192.168.189.167?) (nathan@xxxxxxxxx) by mail.codesourcery.com with ESMTPA;
20 Oct 2005 16:28:39 -0000</i><br>>Sunil Kher wrote:<br>>>Hey,
Thanx for the response. What extra information should I <br>>>provide?
I will try to provide you everything that you ask for. <br>>>Also,
what is the latest version of gcov and where can I get it?
<br>>>Thanx, Sunil.<br>><br>>Please cc the gcc list. gcov is
part of gcc, so the latest version <br>>will be with the 4.0.2 gcc
release. In order to help further your <br>>going to have to show how
you compiled and linked your program. <br>>what system you are running
on. You indicate that a simple test <br>>case doesn't
work.<br>><br>>nathan<br>>><br>>><BLOCKQUOTE
style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; <br>>>BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
<br>>>style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr
<br>>>color=#A0C6E5 size=1><br>>>From: <i>Nathan
Sidwell &lt;nathan@xxxxxxxxxxxxxxxx&gt;</i><br>To:
<br>>> <i>Sunil Kher
&lt;sunilkher@xxxxxxxxxxx&gt;</i><br>CC:
<br>>><i>help-gcc@xxxxxxx</i><br>Subject:
<i>Re: Help needed with <br>>>gcov</i><br>Date:
<i>Thu, 20 Oct 2005 15:53:36
<br>>>+0100</i><br>MIME-Version:
<i>1.0</i><br>Received: <i>from
<br>>>mail.codesourcery.com ([65.74.133.11]) by MC8-F24.hotmail.com
with <br>>>Microsoft SMTPSVC(6.0.3790.211); Thu, 20 Oct 2005 07:53:42
<br>>>-0700</i><br>Received: <i>(qmail 5325 invoked
from network); 20 <br>>>Oct 2005 14:53:42
-0000</i><br>Received: <i>from unknown (HELO
<br>>>?192.168.189.167?) (nathan@xxxxxxxxx) by mail.codesourcery.com
with <br>>>ESMTPA; 20 Oct 2005 14:53:42
-0000</i><br>&gt;Sunil Kher
<br>>>wrote:<br>&gt;&gt;Hi, does any one know where can
I get some help <br>>>with the code <br>&gt;&gt;coverage
tool gcov? The problems I have <br>>>are a
couple.<br>&gt;&gt;<br>&gt;&gt;1. .da files are
not generated <br>>>for each source code file compiled
<br>&gt;&gt;with -fprofile-arcs <br>>>-ftest-coverage
options but only for some.<br>&gt;&gt;2. Even for
<br>>>the ones where .da files are generated, gcov states
<br>>><br>&gt;&gt;that none of the code was executed
when I can see that <br>>>some <br>&gt;&gt;particular
lines were executed. e.g. cout &lt;&lt; <br>>>&quot;Hello
World&quot; will <br>&gt;&gt;show me the output but
<br>>>gcov will state that the line was never
<br>>><br>&gt;&gt;executed.<br>&gt;&gt;<br>&gt;&gt;Do
you know where I <br>>>can find some
help?<br>&gt;&gt;<br>&gt;&gt;Thanx,
<br>>>Sunil.<br>&gt;&gt;407-916-3521.<br>&gt;&gt;<br>&gt;&gt;PS:
The <br>>>version I am using for gcov is 1.5 and gcc version is
<br>>><br>&gt;&gt;2.95.3 20010315 (release) running on
<br>>>Sun-Solaris.<br>&gt;<br>&gt;There is too
little information here to <br>>>give specific suggestions.
<br>&gt;However, if it turns out that <br>>>gcov is buggy
(as opposed to just <br>&gt;being invoked
<br>>>incorrectly), it will not be fixed. To get a fix,
<br>&gt;you'll <br>>>need to update to a much more recent
<br>>>release.<br>&gt;<br>&gt;nathan<br>&gt;--<br>&gt;Nathan
Sidwell <br>>>:: http://www.codesourcery.com ::
<br>&gt;CodeSourcery
<br>>>LLC<br>&gt;nathan@xxxxxxxxxxxxxxxx ::
<br>>><br>&gt;http://www.planetfall.pwp.blueyonder.co.uk<br>&gt;<br></font></BLOCKQUOTE><br>>><br>>><br>>><br>><br>><br>>--<br>>Nathan
Sidwell :: http://www.codesourcery.com :: <br>>CodeSourcery
LLC<br>>nathan@xxxxxxxxxxxxxxxx ::
<br>>http://www.planetfall.pwp.blueyonder.co.uk<br>><br></font></BLOCKQUOTE>
