<<Makefile.txt>> /sw/tools/build/cur/sun4/bin/mips-ascend-elf-objcopy: S12mpost.bin: File too large Hi I am getting a problem with the above error message which I believe to be an issue with the version of objcopy, my target file is S12mpost.bin. Thanks..Anthony
/sw/tools/build/cur/`arch`/bin/mips-ascend-elf-gcc -MD -O2 -EL -g -I../Hsrc/ -DSMALL_ENDIAN -DQ_STNGR_CONTROL_MODULE -DSTINGER11 -DCAG -DPR5000 -DDDEBUG_MODE -DV3 -DIP2000B -o r5000.abs startup.o sbdser.o prtf.o mips_traps.o mipscache.o traps_info.o set_up_nile4.o getnum.o menu.o S11testtable.o S11mpost.o addr_data_algo.o test_mem_interface.o check_board_algo.o checker_check_algo.o const_pattern_algo.o galpat_algo.o march_algo.o masest_algo.o mem_check.o TestDRAM.o sequencer.o peekpoke.o wakpat_algo.o walking_0_1_algo.o tlb.o mem_utils.o tlb_utils.o real_time_clock.o msg.o hashrom.o r5000_cache_tests.o cache_utils.o temperature_sensor.o LEDmap.o flash32.o S10pci_config_space.o ether82557.o S11_device_tree.o TestSocketModem.o TestInterrupt.o SAR98405RegTest.o RegisterAccess.o PM4341ARegsTest.o MagicRegsTests.o TestPD98411Regs.o UNumLocation.o controlbus.o LPIPCMCIARegTest.o MagicMemory.o nphashrom.o SAR98405LoopBack.o Quad98411LoopBack.o MagicLoopBack.o qkillerLoopBack.o qkillerRegTest.o npUtil.o npMpost.o gtDS1511.o gtDesc.o gtFlash.o gtI2o.o gtMemory.o gtMpsc.o gtPci.o gtSdma.o ev64240.o gtFS.o gtAuxil.o gtCntmr.o gtCore.o gtDma.o gtI2c.o gtEther.o -nostdlib -TTest.r5000.ld /sw/tools/bin/mips-ascend-elf-ld: Warning: type of symbol `__main' changed from 1 to 2 in S11mpost.o /sw/tools/build/cur/`arch`/bin/mips-ascend-elf-objcopy -O binary -R .sbss -R .bss \ -R .reginfo -R .mdebug --adjust-section-vma=.text-0xa0040000 \ --adjust-section-vma=.data-0xa0040000 \ --adjust-section-vma=.sdata-0xa0040000 \ --adjust-section-vma=.rodata-0xa0040000 r5000.abs S12mpost.bin /sw/tools/build/cur/sun4/bin/mips-ascend-elf-objcopy: S12mpost.bin: File too large gmake: *** [S12mpost.bin] Error 1 ****** j a0040000 if loaded test.bin *******
