From: Dave Chinner <dchinner@xxxxxxxxxx>
This is a 2000s era SGI test script that no-one uses anymore. It
likely doesn't even work because it is dependent on CVS and/or
the SGI proprietary ptools revision control system for source
control. Hence it clearly hasn't been used for years, so remove it.
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
tools/auto-qa | 568 --------------------------------------------------
1 file changed, 568 deletions(-)
delete mode 100755 tools/auto-qa
diff --git a/tools/auto-qa b/tools/auto-qa
deleted file mode 100755
index 1beb28359..000000000
--- a/tools/auto-qa
+++ /dev/null
@@ -1,568 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (c) 2000-2003 Silicon Graphics, Inc. All Rights Reserved.
-#
-# automatic qa system. 31/08/00 dxm@xxxxxxx
-#
-# Usage: auto_qa start-state [stop-state]
-# Do auto_qa from start-state up to stop-state inclusive
-# or if no stop-state given then do it until reach "done" state.
-#
-
-_log()
-{
- echo "$*" >&2
- echo "$*" >> $LOG
- sync
-}
-
-_fail()
-{
- if [ "$started" = "1" ]
- then
- echo "auto-qa stopped" | wall
- started=0
- fi
-
- _log "$*"
-
- # send special email if a cron'd qa run fails
- case $state
- in
- cron*)
- mail -s "XFS QA status report" $EMAIL < $LOG 2>&1
- ;;
- esac
-
- status=1
- exit 1
-}
-
-_get_kernel_version()
-{
- [ -x "$KWORKAREA" ] || return
- [ -r "$KWORKAREA/Makefile" ] \
- || _fail "can't read kernel makefile $KWORKAREA/Makefile"
-
- eval `awk '
- BEGIN { FS = "[ \t=]+" }
- /^VERSION =/ { a=$2 }
- /^PATCHLEVEL =/ { b=$2 }
- /^SUBLEVEL =/ { c=$2 }
- /^EXTRAVERSION =/ { d=$2 }
- END {
- print "VERSION=" a "." b "." c d " ; SVERSION=" a "." b "." c
- }
- ' < $KWORKAREA/Makefile`
-}
-
-# this should be constant
-
-ROOT="$HOME/qa"
-HOST=`hostname -s`
-if [ ! -z "$CVSROOT" ]; then
- export WORKAREA="$ROOT/xfs-cmds"
-else
- [ -z "$WORKAREA" ] && export WORKAREA="$ROOT/xfs-cmds"
-fi
-
-
-export PATH="/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin/ptools:/usr/local/bin"
-STATE=$ROOT/qa.state
-QADIR="$WORKAREA/xfstests"
-SUDO="su -c"
-CONFIG="$ROOT/$HOST.config"
-COMMON_CONFIG="$QADIR/common/config"
-SH="/bin/sh"
-LOG="$ROOT/qa.log"
-
-# do some cleanup on exit
-
-_cleanup()
-{
- umount $SCRATCH_DEV &> /dev/null
- umount $TEST_DEV &> /dev/null
- if [ "$started" = 1 ]
- then
- echo "auto-qa stopped" | wall
- started=0
- fi
-}
-status=1
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-# clean exit
-
-_success()
-{
- status=0
- exit 0
-}
-
-_get_state()
-{
- state=`cat $STATE`
-}
-
-_set_state()
-{
- echo $1 > $STATE
- _get_state
-}
-
-_change_state()
-{
- new=$1
-
- # if have state XXXX-state then preserve XXXX-newstate
-
- case $state
- in
- *-*)
- case $new
- in
- *-*)
- _set_state $new
- ;;
- *)
- _set_state `echo $state | sed "s/-.*$/-$new/"`
- ;;
- esac
- ;;
- *)
- _set_state $new
- ;;
- esac
-}
-
-_sudo()
-{
- $ROOT/su -c "$*" < /dev/null ;# HACK - we need a hacked su at the mo
-}
-
-_restart()
-{
- exec $ROOT/su -c "(shutdown -r now \"auto-qa rebooting\" )&" < /dev/null
-}
-
-_update_workarea()
-{
- if [ -z "$CVSROOT" ]; then
- _log " *** p_tupdate"
- cd "$1"
- WORKAREA="$1" p_tupdate 2>&1 \
- || _fail " !!! p_tupdate failed"
-
- _log " *** non-trunk files"
- cd "$1"
- WORKAREA="$1" p_list -c 2>&1 \
- || _fail " !!! p_list failed"
- else
- _log " *** cvs update"
- cd "$1"
- cvs -z3 update -d
- fi
-}
-
-_test_mkfs_xfs()
-{
- TEST_OPTIONS=""
- [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
- TEST_OPTIONS="$TEST_OPTIONS -rrtdev=$TEST_RTDEV"
- [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
- TEST_OPTIONS="$TEST_OPTIONS -llogdev=$TEST_LOGDEV"
- _sudo /sbin/mkfs.xfs -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
- mkfs_status=$?
- if [ "$USE_BIG_LOOPFS" = yes ]; then
- [ -z "$RETAIN_AG_BYTES" ] && RETAIN_AG_BYTES=0
- _sudo $QADIR/tools/ag-wipe -q -r $RETAIN_AG_BYTES $TEST_DEV
- fi
- return $mkfs_status
-}
-
-_test_mount()
-{
- TEST_OPTIONS=""
- [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
- TEST_OPTIONS="$TEST_OPTIONS -ortdev=$TEST_RTDEV"
- [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
- TEST_OPTIONS="$TEST_OPTIONS -ologdev=$TEST_LOGDEV"
- _sudo mount -t xfs $TEST_OPTIONS $MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
-}
-
-_i386_install()
-{
- _sudo cp -f "$KWORKAREA/arch/i386/boot/bzImage" "$IMAGE" 2>&1 \
- || _fail " !!! install kernel failed"
- _sudo cp -f "$KWORKAREA/System.map" "$SYSTEMMAP" 2>&1 \
- || _fail " !!! install kernel failed"
- if [ -z "$KMODULES" -o "$KMODULES" = yes ]; then
- _sudo make EXTRAVERSION=-$EXTRA modules_install 2>&1 \
- || _fail " !!! install modules failed"
- fi
-
-
- if [ -z "$KINSTALL" -o "$KINSTALL" = lilo ]; then
- _log " *** reinit lilo"
- _sudo /sbin/lilo 2>&1 \
- || _fail " !!! reinit lilo failed"
- fi
-}
-
-_i386_restart()
-{
- if [ -z "$KINSTALL" -o "$KINSTALL" = lilo ]; then
- _sudo /sbin/lilo -R $EXTRA $KERNEL_OPTIONS 2>&1 \
- || _fail " !!! lilo failed"
- fi
-}
-
-_ia64_install()
-{
- echo not yet implemented
-}
-
-_ia64_restart()
-{
- echo not yet implemented
-}
-
-_check_kernel()
-{
- [ -d "$KWORKAREA" ] || _fail " !!! QA kernel workarea \"$KWORKAREA\" not found"
- [ -r "$CONFIG" ] || _fail " !!! Can't read config file $CONFIG"
-}
-
-
-_log "*** XFS QA (`date`)"
-
-_get_state
-
-# check preconditions for starting state
-case $1
-in
- cron-init)
- case $state
- in
- *done)
- ;;
- *)
- _fail " !!! cron-init while not in \"*done\" state"
- ;;
- esac
- ;;
- cron-restarted)
- # we don't auto restart after reboot, but cron the restart
- # to happen a bit later - it's much easier and safer that way
- if [ "$state" != "cron-restarted" ]
- then
- _fail " !!! cron-restarted while not in \"cron-restarted\" state"
- fi
- ;;
-esac
-
-[ -n "$1" ] && _set_state $1
-[ -n "$2" ] && stop_state=$2
-
-[ "$UID" -eq 0 ] && _fail " !!! QA most be run as a normal user"
-[ -d "$ROOT" ] || _fail " !!! QA root \"$ROOT\" not found"
-[ -d "$WORKAREA" ] || _fail " !!! QA workarea \"$WORKAREA\" not found"
-cd $QADIR
-. "$COMMON_CONFIG" || _fail " !!! Couldn't source $COMMON_CONFIG"
-
-_get_kernel_version
-IMAGE="$BOOT/vmlinuz-$EXTRA"
-SYSTEMMAP="$BOOT/System.map-$VERSION-$EXTRA"
-MODULES="/lib/modules/$SVERSION"
-
-cd $ROOT
-
-started=1
-echo "auto-qa started" | wall
-
-while true
-do
- _get_state
-
- _log " *** state $state start (`date`)"
- _log " (user=$USER, host=$HOST)"
- new_state=""
-
- start_state=$state
-
- case $state
- in
- *init)
- echo "" > $ROOT/qa.log
- echo "" > $ROOT/qa.full
- _log "******************************************************"
- _log "QA init $VERSION (`date`)"
- _log "******************************************************"
- new_state="updatetools"
- ;;
-
- *updatetools)
- _update_workarea "$WORKAREA"
- new_state="cleantools"
- ;;
-
- *cleantools)
- # we need to configure or else we might fail to clean
- for pkg in attr acl xfsprogs xfsdump xfstests
- do
- [ -d $WORKAREA/$pkg ] || continue
- cd $WORKAREA/$pkg
- _log " *** clean $pkg tools"
- make realclean 2>&1 \
- || _fail " !!! clean $pkg failed"
- done
- new_state="buildtools"
- ;;
-
- *buildtools)
- _log " *** build and install tools"
- for pkg in attr acl xfsprogs xfsdump xfstests
- do
- [ -d $WORKAREA/$pkg ] || continue
- cd $WORKAREA/$pkg
-
- make configure 2>&1 \
- || _fail " !!! configure $pkg failed"
- make default 2>&1 \
- || _fail " !!! build $pkg failed"
-
- _sudo make install install-dev 2>&1 \
- || _fail " !!! install $pkg failed"
-
- # attr and acl now have install-lib targets as well
- [ "$pkg" = "attr" -o "$pkg" = "acl" ] || continue
- _sudo make install-lib 2>&1 \
- || _fail " !!! install $pkg failed"
- done
-
- new_state="updatekernel"
- ;;
-
- *updatekernel)
- _check_kernel
- _update_workarea "$KWORKAREA"
- new_state="cleankernel"
- ;;
-
- *cleankernel)
- _check_kernel
- _log " *** clean kernel"
- cd "$KWORKAREA"
- make mrproper 2>&1 \
- || _fail " !!! clean kernel failed"
-
- _log " *** install configuration file"
- cp -f $CONFIG "$KWORKAREA/.config" 2>&1 \
- || _fail " !!! failed to install config"
-
- _log " *** remove version file"
- rm -f include/linux/version.h 2>&1 \
- || _fail " !!! failed to clean version"
-
- new_state="reconfig"
- ;;
-
- *reconfig)
- _check_kernel
- _log " *** reconfig kernel"
-
- # we better start from scratch if this fails
- _change_state "cleankernel"
-
- cd "$KWORKAREA"
- # we want to use default options for any new config options.
- echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n" | \
- make EXTRAVERSION=-$EXTRA oldconfig 2>&1 \
- || _fail " !!! reconfig oldconfig failed"
- make EXTRAVERSION=-$EXTRA dep 2>&1 \
- || _fail " !!! reconfig dep failed"
-
- new_state="buildkernel"
- ;;
-
- *buildkernel)
- _check_kernel
- _log " *** build kernel"
- _log " --- kernel ($IMAGE)"
- [ -z "$KMODULES" -o "$KMODULES" = yes ] && \
- _log " --- modules ($MODULES)"
-
- _change_state "cleankernel" ; # we better start from scratch if this fails
-
- cd "$KWORKAREA"
- [ -z "$KTARGET" ] && KTARGET=bzImage
- [ -z "$KMODULES" -o "$KMODULES" = yes ] && \
- KTARGET="$KTARGET modules"
- make -j4 EXTRAVERSION=-$EXTRA $KTARGET 2>&1 \
- || _fail " !!! build $KTARGET failed"
- new_state="install"
- ;;
-
- *install)
- _check_kernel
- _log " *** blat old modules"
- _sudo rm -rf $MODULES
-
- _log " *** install kernel"
- cd "$KWORKAREA"
- case `uname -m`
- in
- i386|i686) _i386_install ;;
- ia64) _ia64_install ;;
- esac
-
- new_state="restart"
- ;;
-
- *restart)
- _log " *** select qa kernel"
- case `uname -m`
- in
- i386|i686) _i386_restart ;;
- ia64) _ia64_restart ;;
- esac
-
- _log " *** prepare to restart"
- _change_state "restarted"
-
- _log " *** restarting"
-
- _restart # doesn't return
- ;;
-
- *restarted)
- _log " *** QA reentered after restart"
-
- new_state="check"
- ;;
-
- *check)
- uname=`uname -a`
- _log " *** uname $uname"
-
- if [ "$MODULAR" -eq 0 ]; then
- new_state="reset"
- else
- new_state="probe"
- fi
- ;;
-
- *probe)
- _log " *** modules dependencies"
- _sudo depmod -a 2>&1 \
- || _fail " !!! failed to depmod -a"
-
- _log " *** unmounting XFS mounts"
- _sudo umount -a -t xfs 2>&1
-
- _log " *** removing modules"
- for m in xfsidbg xfs kdbm_pg kdbm_vm
- do
- _sudo rmmod $m 2> /dev/null
- done
-
- _log " *** installing modules"
- _sudo modprobe xfs 2>&1 \
- || _fail " !!! failed to modprobe xfs"
-
- new_state="reset"
- ;;
-
- *reset)
-
- _log " *** unmounting TEST_DEV"
- _sudo umount $TEST_DEV 2>&1
-
- _log " *** unmounting SCRATCH_DEV"
- _sudo umount $SCRATCH_DEV 2>&1
-
- _log " *** clean TEST_DEV"
- _test_mkfs_xfs 2>&1 \
- || _fail " !!! failed to mkfs TEST_DEV"
-
- _log " *** mounting TEST_DEV"
- _test_mount 2>&1 \
- || _fail " !!! failed to mount"
-
- new_state="run"
- ;;
-
- soak-run)
- cd $QADIR
-
- _log " *** run soak test"
- _sudo ./soak $SOAK_PASSES $SOAK_STRESS $SOAK_PROC \
- || _fail " !!! failed to run soak test"
-
- new_state="done"
- ;;
-
- bench-run)
- cd $QADIR
-
- # $BENCHMARK is typically unset, which equates to "all"
- #
- _log " *** run benchmarks"
- _sudo ./bench $BENCH_PASSES `id -nu && id -ng` $BENCHMARK \
- || _fail " !!! failed to run benchmarks"
-
- _log ""
- _log " *** send results mail"
- mail -s "XFS QA benchmark results" $EMAIL < $QADIR/bench.out 2>&1
-
- new_state="done"
- ;;
-
- *run)
- cd $QADIR
-
- _log " *** run tests ($CHECK_OPTIONS)"
- _sudo ./check -l $CHECK_OPTIONS 2>&1 | tee $ROOT/qa.out
-
- _log ""
- _log " *** send status mail"
- mail -s "XFS QA status report" $EMAIL < $ROOT/qa.out 2>&1
-
- new_state="done"
- ;;
-
- *done)
- _log "*** requested QA state transitions complete"
-
- _success
- ;;
-
- *nothing)
- new_state="done"
- _log " *** do nothing"
- ;;
-
- *)
- _fail " !!! unknown state $state"
- ;;
- esac
-
- _log " *** state $state done (`date`)"
- [ "$new_state" = "" ] && _fail " !!! no new state set"
-
- if [ -n "$stop_state" ]
- then
- # remove hyphen prefixes
- s1=`echo $start_state | sed 's/.*-//'`
- s2=`echo $stop_state | sed 's/.*-//'`
-
- if [ $s1 = $s2 ]
- then
- # we have been requested to stop here and not go on
- new_state="done"
- fi
- fi
-
- _change_state $new_state
-
-done
--
2.45.2
