On Thu, Nov 07, 2024 at 06:10:11PM +0800, Zorro Lang wrote:
> On Thu, Nov 07, 2024 at 04:40:34PM +1100, Dave Chinner wrote:
> > On Tue, Nov 05, 2024 at 07:47:12AM -0800, Darrick J. Wong wrote:
> > > On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> > > > On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > > > > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > > > > and uses only the local parameters so the filesystem is set up with
> > > > > the configuration the test expects.
> > > > >
> > > > > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > > > > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > > > > overloads the global MKFS_OPTIONS with local test options, the local
> > > > > test parameters are dropped along with the global paramters when
> > > > > there is a conflict. Hence the mkfs_scratch call fails to set the
> > > > > filesystem up the way the test expects.
> > > >
> > > > But the rmapbt can be default on, in which case it does not get
> > > > removed. And then without the _sized we'll run into the problem that
> > > > Hans' patches fixed once again.
> > >
> > > Well we /could/ make _scratch_mkfs_sized pass options through to the
> > > underlying _scratch_mkfs.
> >
> > That seems like the right thing to do to me.
>
> OK, thanks for all of these suggestions, how about below (draft) change[1].
> If it's good to all of you, I'll send another patch.
>
> Thanks,
> Zorro
>
> diff --git a/common/rc b/common/rc
> index 2af26f23f..673f056fb 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -1027,7 +1027,9 @@ _small_fs_size_mb()
> _try_scratch_mkfs_sized()
> {
> local fssize=$1
> - local blocksize=$2
> + shift
> + local blocksize=$1
> + shift
> local def_blksz
> local blocksize_opt
> local rt_ops
> @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized()
> # don't override MKFS_OPTIONS that set a block size.
> echo $MKFS_OPTIONS |grep -E -q "b\s*size="
> if [ $? -eq 0 ]; then
> - _try_scratch_mkfs_xfs -d size=$fssize $rt_ops
> + _try_scratch_mkfs_xfs -d size=$fssize $rt_ops $@
> else
> _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
> - -b size=$blocksize
> + -b size=$blocksize $@
I've finally had some time to integrate this into my test setup; I'll
try this out tonight.
Note: According to shellcheck, if you use $@, you should enclose it in
double quotes.
_try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
-b size=$blocksize
-b size=$blocksize "$@"
--D
> fi
> ;;
> ext2|ext3|ext4)
> @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized()
> _notrun "Could not make scratch logdev"
> MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV"
> fi
> - ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> + ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
> ;;
> gfs2)
> # mkfs.gfs2 doesn't automatically shrink journal files on small
> @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized()
> (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
> MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
> fi
> - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
> + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $@ $SCRATCH_DEV $blocks
> ;;
> ocfs2)
> - yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> + yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
> ;;
> udf)
> - $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> + $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
> ;;
> btrfs)
> local mixed_opt=
> @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized()
> # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size()
> (( fssize < $((256 * 1024 * 1024)) )) &&
> ! _scratch_btrfs_is_zoned && mixed_opt='--mixed'
> - $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
> + $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $@ $SCRATCH_DEV
> ;;
> jfs)
> - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
> + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $@ $SCRATCH_DEV $blocks
> ;;
> reiserfs)
> - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
> ;;
> reiser4)
> # mkfs.resier4 requires size in KB as input for creating filesystem
> - $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
> + $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $@ $SCRATCH_DEV \
> `expr $fssize / 1024`
> ;;
> f2fs)
> # mkfs.f2fs requires # of sectors as an input for the size
> local sector_size=`blockdev --getss $SCRATCH_DEV`
> - $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
> + $MKFS_F2FS_PROG $MKFS_OPTIONS $@ $SCRATCH_DEV `expr $fssize / $sector_size`
> ;;
> tmpfs)
> local free_mem=`_free_memory_bytes`
> if [ "$free_mem" -lt "$fssize" ] ; then
> _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
> fi
> - export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
> + export MOUNT_OPTIONS="-o size=$fssize $@ $TMPFS_MOUNT_OPTIONS"
> ;;
> bcachefs)
> - $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV
> + $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $@ $SCRATCH_DEV
> ;;
> *)
> _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
> @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized()
>
> _scratch_mkfs_sized()
> {
> - _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)"
> + _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)"
> }
>
> # Emulate an N-data-disk stripe w/ various stripe units
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index 9b5badbae..f8f102d78 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -66,8 +66,7 @@ scenario() {
> }
>
> check_label() {
> - MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> - >> $seqres.full
> + _scratch_mkfs_sized "$fs_size" "" "-L oldlabel" >> $seqres.full 2>&1
> _scratch_xfs_db -c label
> _scratch_xfs_admin -L newlabel "$@" >> $seqres.full
> _scratch_xfs_db -c label
>
>
>
>
> >
> > -Dave.
> > --
> > Dave Chinner
> > david@xxxxxxxxxxxxx
> >
>
>
