Re: [PATCH] btrfs/319: make the test work when compression is used

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]





在 2024/9/6 20:27, Filipe Manana 写道:
On Fri, Sep 6, 2024 at 11:39 AM Qu Wenruo <quwenruo.btrfs@xxxxxxx> wrote:



在 2024/9/6 01:08, fdmanana@xxxxxxxxxx 写道:
From: Filipe Manana <fdmanana@xxxxxxxx>

Currently btrfs/319 assumes there is no compression and that the files
get a single extent (1 fiemap line) with a size of 1048581 bytes. However
when testing with compression, for example by passing "-o compress" to
MOUNT_OPTIONS environment variable, we get several extents and two lines
of fiemap output, which makes the test fail since it hardcodes the fiemap
output:

    $ MOUNT_OPTIONS="-o compress" ./check btrfs/319
    FSTYP         -- btrfs
    PLATFORM      -- Linux/x86_64 debian0 6.11.0-rc6-btrfs-next-173+ #1 SMP PREEMPT_DYNAMIC Tue Sep  3 17:40:24 WEST 2024
    MKFS_OPTIONS  -- /dev/sdc
    MOUNT_OPTIONS -- -o compress /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

    btrfs/319 1s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/319.out.bad)
        --- tests/btrfs/319.out        2024-08-12 14:16:55.653383284 +0100
        +++ /home/fdmanana/git/hub/xfstests/results//btrfs/319.out.bad 2024-09-05 15:24:53.323076548 +0100
        @@ -6,11 +6,13 @@
         e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/foo
         e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/bar
         File bar fiemap in the original filesystem:
        -0: [0..2055]: shared|last
        +0: [0..2047]: shared
        +1: [2048..2055]: shared|last
         Creating a new filesystem to receive the send stream...
        ...
        (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/319.out /home/fdmanana/git/hub/xfstests/results//btrfs/319.out.bad'  to see the entire diff)

    HINT: You _MAY_ be missing kernel fix:
          46a6e10a1ab1 btrfs: send: allow cloning non-aligned extent if it ends at i_size

    Ran: btrfs/319
    Failures: btrfs/319
    Failed 1 of 1 tests

So change the test to not rely on the fiemap output in its golden output
and instead just check if all the extents reported by fiemap have the
shared flag set (failing if there are any without the shared flag).

Looks good to me.

Reviewed-by: Qu Wenruo <wqu@xxxxxxxx>

Just one minor improvement to make debug a little easier.


Signed-off-by: Filipe Manana <fdmanana@xxxxxxxx>
---
   tests/btrfs/319     | 19 +++++++++++++++----
   tests/btrfs/319.out |  4 ----
   2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/tests/btrfs/319 b/tests/btrfs/319
index 975c1497..7cfd3d00 100755
--- a/tests/btrfs/319
+++ b/tests/btrfs/319
@@ -32,6 +32,19 @@ _require_odirect
   _fixed_by_kernel_commit 46a6e10a1ab1 \
       "btrfs: send: allow cloning non-aligned extent if it ends at i_size"

+check_all_extents_shared()
+{
+     local file=$1
+     local fiemap_output
+
+     fiemap_output=$($XFS_IO_PROG -r -c "fiemap -v" $file | _filter_fiemap_flags)

Maybe also save the full unfiltered output to seqres.full?

Hum, why?

Do you think looking at the flags in hexadecimal values instead of
symbolic names like "shared", "encoded", "last", etc, is easier to
read?

My bad, I thought that filter only shows the flags, but it turns out
that keeps the filepos and length.

So the filtered one is much better in all aspects.

Thanks,
Qu


Thanks.


Thanks,
Qu

+     echo "$fiemap_output" | grep -qv 'shared'
+     if [ $? -eq 0 ]; then
+             echo -e "Found non-shared extents for file $file:\n"
+             echo "$fiemap_output"
+     fi
+}
+
   send_files_dir=$TEST_DIR/btrfs-test-$seq
   send_stream=$send_files_dir/snap.stream

@@ -58,8 +71,7 @@ echo "File digests in the original filesystem:"
   md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
   md5sum $SCRATCH_MNT/snap/bar | _filter_scratch

-echo "File bar fiemap in the original filesystem:"
-$XFS_IO_PROG -r -c "fiemap -v" $SCRATCH_MNT/snap/bar | _filter_fiemap_flags
+check_all_extents_shared "$SCRATCH_MNT/snap/bar"

   echo "Creating a new filesystem to receive the send stream..."
   _scratch_unmount
@@ -72,8 +84,7 @@ echo "File digests in the new filesystem:"
   md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
   md5sum $SCRATCH_MNT/snap/bar | _filter_scratch

-echo "File bar fiemap in the new filesystem:"
-$XFS_IO_PROG -r -c "fiemap -v" $SCRATCH_MNT/snap/bar | _filter_fiemap_flags
+check_all_extents_shared "$SCRATCH_MNT/snap/bar"

   # success, all done
   status=0
diff --git a/tests/btrfs/319.out b/tests/btrfs/319.out
index 14079dbe..18a50ff8 100644
--- a/tests/btrfs/319.out
+++ b/tests/btrfs/319.out
@@ -5,12 +5,8 @@ Creating snapshot and a send stream for it...
   File digests in the original filesystem:
   e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/foo
   e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/bar
-File bar fiemap in the original filesystem:
-0: [0..2055]: shared|last
   Creating a new filesystem to receive the send stream...
   At subvol snap
   File digests in the new filesystem:
   e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/foo
   e61178ee0288ebe3fa36a3c975b02c94  SCRATCH_MNT/snap/bar
-File bar fiemap in the new filesystem:
-0: [0..2055]: shared|last






[Index of Archives]     [Linux Filesystems Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux