On Mon, Feb 19, 2024 at 7:49 PM Anand Jain <anand.jain@xxxxxxxxxx> wrote:
>
> The tempfsid logic must determine whether the incoming mount request
> is for a device already mounted or a new device mount. Verify that it
> recognizes the device already mounted well by creating reflink across
> the subvolume mount points.
>
> Signed-off-by: Anand Jain <anand.jain@xxxxxxxxxx>
> ---
> v2:
> add subvol group
> use $UMOUNT_PROG
> remove _fail for _cp_reflink
>
> tests/btrfs/311 | 89 +++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/311.out | 24 ++++++++++++
> 2 files changed, 113 insertions(+)
> create mode 100755 tests/btrfs/311
> create mode 100644 tests/btrfs/311.out
>
> diff --git a/tests/btrfs/311 b/tests/btrfs/311
> new file mode 100755
> index 000000000000..cebbc3a59e6a
> --- /dev/null
> +++ b/tests/btrfs/311
> @@ -0,0 +1,89 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2024 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 311
> +#
> +# Mount the device twice check if the reflink works, this helps to
> +# ensure device is mounted as the same device.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick subvol tempfsid
> +
> +# Override the default cleanup function.
> +_cleanup()
> +{
> + cd /
> + $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> + rm -r -f $tmp.*
> + rm -r -f $mnt1
> +}
> +
> +. ./common/filter.btrfs
> +. ./common/reflink
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_require_cp_reflink
> +_require_btrfs_sysfs_fsid
> +_require_btrfs_fs_feature temp_fsid
> +_require_btrfs_command inspect-internal dump-super
> +_require_scratch
> +
> +mnt1=$TEST_DIR/$seq/mnt1
> +mkdir -p $mnt1
> +
> +same_dev_mount()
> +{
> + echo ---- $FUNCNAME ----
> +
> + _scratch_mkfs >> $seqres.full 2>&1
> +
> + _scratch_mount
> + $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
> + _filter_xfs_io
> +
> + echo Mount the device again to a different mount point
> + _mount $SCRATCH_DEV $mnt1
> +
> + _cp_reflink $SCRATCH_MNT/foo $mnt1/bar
> + echo Checksum of reflinked files
> + md5sum $SCRATCH_MNT/foo | _filter_scratch
> + md5sum $mnt1/bar | _filter_test_dir
> +
> + check_fsid $SCRATCH_DEV
> +}
> +
> +same_dev_subvol_mount()
> +{
> + echo ---- $FUNCNAME ----
> + _scratch_mkfs >> $seqres.full 2>&1
> +
> + _scratch_mount
> + $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/subvol
Need to use: | _filter_scratch
See the golden output below.
> +
> + $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/subvol/foo | \
> + _filter_xfs_io
> +
> + echo Mounting a subvol
> + _mount -o subvol=subvol $SCRATCH_DEV $mnt1
> +
> + _cp_reflink $SCRATCH_MNT/subvol/foo $mnt1/bar
> + echo Checksum of reflinked files
> + md5sum $SCRATCH_MNT/subvol/foo | _filter_scratch
> + md5sum $mnt1/bar | _filter_test_dir
> +
> + check_fsid $SCRATCH_DEV
> +}
> +
> +same_dev_mount
> +
> +_scratch_unmount
> +_cleanup
> +mkdir -p $mnt1
> +
> +same_dev_subvol_mount
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/311.out b/tests/btrfs/311.out
> new file mode 100644
> index 000000000000..8787f24ab867
> --- /dev/null
> +++ b/tests/btrfs/311.out
> @@ -0,0 +1,24 @@
> +QA output created by 311
> +---- same_dev_mount ----
> +wrote 9000/9000 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Mount the device again to a different mount point
> +Checksum of reflinked files
> +42d69d1a6d333a7ebdf64792a555e392 SCRATCH_MNT/foo
> +42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/311/mnt1/bar
> +On disk fsid: FSID
> +Metadata uuid: FSID
> +Temp fsid: FSID
> +Tempfsid status: 0
> +---- same_dev_subvol_mount ----
> +Create subvolume '/mnt/scratch/subvol'
Because of this...
Otherwise it looks fine.
With that corrected:
Reviewed-by: Filipe Manana <fdmanana@xxxxxxxx>
Thanks.
> +wrote 9000/9000 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Mounting a subvol
> +Checksum of reflinked files
> +42d69d1a6d333a7ebdf64792a555e392 SCRATCH_MNT/subvol/foo
> +42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/311/mnt1/bar
> +On disk fsid: FSID
> +Metadata uuid: FSID
> +Temp fsid: FSID
> +Tempfsid status: 0
> --
> 2.39.3
>
